525766
43
Zoom out
Zoom in
Previous page
1/94
Next page
41
View settings
Go to “TV Menu” > “Setup” > “View setting”.
Setup
Network setup
Auto installation
View setting
Channel settings
CH list
:Back:Enter
Menu
Select recording device
View setting
Auto installation
The TV automatically detects and stores all available
services in your area. This function also allows you
to perform the channel setting for digital, satellite
and analogue individually and reconfigure the
settings after the initial auto installation has been
completed.
1 Go to “TV Menu” > “Setup” > “View setting” >
“Auto installation”.
2 Press c/d to select “Yes”, and then press ;.
3 Press a/b/c/d to select the desired
language, and then press ;.
NOTE
PIN input is required when executing “Auto installation”.
The default PIN is “1234”. To change the PIN setting,
refer to Individual setting — PIN (Page 44). To reset the
PIN setting (PIN input will no longer be needed), refer to
Reset the PIN (Page 79).
You cannot set the Home/Store setting and the country
setting in “Auto installation” in the “Setup” menu. If
you want to reconfigure those settings, automatically
execute initial auto installation after executing “Reset”
from the “Setup” menu.
The current country setting is displayed on the screen.
4 Press a/b to select the broadcast standard
you want to search, and then press ;.
E
Digital search
After selecting the service you want to search,
either “Terrestrial” or “Cable”, refer to Digital
broadcast setting on page 16.
E
Analogue search
The TV searches for, sorts and stores all the
receivable TV stations. Refer to Analogue
broadcast setting on page 16.
E
Satellite search
After selecting “Satellite search”, the current
DVB-S/S2 setting screen is displayed. Refer to
the “Satellite search” setting on page 17.
NOTE
After selecting “Next” in the DVB-S/S2 setting screen,
you need to select your preferred satellite broadcast to
start searching.
View setting
Programme setup
You can reconfigure the DTV service settings
automatically or manually.
1 Go to “TV Menu” > “Setup” > “View setting” >
“Channel settings” > “Programme setup”.
2 Press a/b to select the broadcast standard
you want to reconfigure, and then press ;.
NOTE
PIN input is required when executing “Programme
setup”. The default PIN is “1234”. To change the PIN
setting, refer to Individual setting — PIN (Page 44).
To reset the PIN setting (PIN input will no longer be
needed), refer to Reset the PIN (Page 79).
Digital setting
Terrestrial
You can reconfigure the following settings when you
select “Terrestrial” in the initial auto installation or
the “Auto installation” menu.
E
Additional search
Use this menu to add new services automatically
after “Digital search” in the “Auto installation” menu
has been completed.
E
Manual search
Add new services within a specified frequency band.
Enter the frequency using 0_9 numeric buttons.
You can perform “Manual search” with a service number
only when the five Nordic countries have been selected
in the country setting.
E
Manual adjust
Configure various settings for each service using the
colour (R/G/Y/B) buttons.
Service
no.
Lock
Service
name
Lock CH skip Old LCN
CH skip SortDelete
1 Press a/b to select the desired service.
2 Press the colour button on the remote control
unit corresponding with the item you want to
reconfigure.
• The mark indicates the operation is set to on.
Each time the colour button is pressed, you can
switch the corresponding operation on/off.
NOTE
Depending on the installation country and/or
broadcaster or operator profile may only R option is
available.
Basic adjustment
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-70LE747E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-70LE747E in the language / languages: English as an attachment in your email.

The manual is 6,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-70LE747E

Sharp LC-70LE747E User Manual - German - 94 pages

Sharp LC-70LE747E User Manual - Dutch - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info