475402
60
Zoom out
Zoom in
Previous page
1/80
Next page
58
Wireless installation
Use the wireless LAN USB adapter supplied with the
TV.
E
Wireless connection overview
PC
Wireless LAN router/access point
Wireless LAN USB adapter (supplied)
Network
NOTE
When using the SHARP wireless LAN USB adapter
(supplied), try to provide as much free space around the
device for best performance.
Make sure the firewalls in your network allows access to
the TV wireless connection.
Operations cannot be guaranteed when used with
access points that do not have Wi-Fi® certification.
A wireless LAN access point is required to connect
the TV to the Internet using a wireless LAN. See the
operation manual of your access point for setup.
E
How to connect
1 Switch on your router before starting the
network installation.
2 Connect the wireless LAN USB adapter
(supplied) to the USB 3 (WIRELESS LAN) port on
the rear of the TV.
Do not use a wireless LAN adapter other than
the supplied SHARP wireless LAN adapter, as
operations cannot be guaranteed.
3 Go to “HOME” > “Network setup” > “Auto
setup”, and then press ;.
NOTE
Follow the on-screen instructions when setting
manually.
Go to “HOME” > “Network setup” > “Manual
setup”.
4 Press a/b to select “Wireless”, and then press
;.
5 Confirm the WPS location and then press ; to
go to the next step.
6 Perform “Connection test” after the connection
is completed. Press c/d to select “Yes”, and
then press ;.
7 The connection test result will be displayed on
the screen. Follow the on-screen instructions for
the settings after this step.
NOTE
When not using “Push button”, perform the settings
from “HOME” > “Network setup” > “Manual setup” >
“Connection type”.
To connect your TV to the internet, you must have a
broadband internet connection.
If you do not have a broadband internet connection,
consult the store where you purchased your TV or ask
your internet service provider or telephone company.
There is no need to enter the security key for
subsequent connections to the wireless network.
If your access point is set to a stealth mode (that
prevents detection by other devices), you may not be
able to establish a connection. In this case, disable the
stealth mode on the access point.
If you want to change the IP settings manually, go to
“HOME” > “Network setup” > “Manual setup” > “IP
setup” and follow the on-screen instructions and the
operation manual of the router.
See page 73 to check the supplied SHARP wireless LAN
adapter specifications.
Network setup
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-70LE741E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-70LE741E in the language / languages: English as an attachment in your email.

The manual is 7,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-70LE741E

Sharp LC-70LE741E User Manual - German - 80 pages

Sharp LC-70LE741E User Manual - Dutch - 80 pages

Sharp LC-70LE741E User Manual - French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info