475402
36
Zoom out
Zoom in
Previous page
1/80
Next page
34
Power save settings
Go to “HOME” > “TV Menu” > “Setup” > “ECO”.
Setup
No signal off
ECO picture control
ECO
Energy save
CH list
:Back:Enter
Menu
No operation off
[Disable]
[Disable]
[Off]
[On]
ECO
ECO picture control
This function automatically detects the image
source and decreases the power consumption while
keeping the brightness of the image unchanged.
NOTE
This function does not work when “AV mode” is set to
“DYNAMIC (Fixed)”, “DYNAMIC” or “AUTO”.
This function does not work when “Energy save” is set
to “Standard” or “Advanced”.
This function is greyed out in 3D mode.
ECO
Energy save
This function enables you to reduce the backlight
brightness in order to decrease the power
consumption and increase the backlight life span as
shown in the following table.
Item
Standard
Reduces the backlight brightness.
Advanced
Reduces the backlight brightness more
than “Standard”.
Off
The backlight brightness is the same
value of your settings in the selected
“AV mode”.
NOTE
This function does not work when “AV mode” is set to
“DYNAMIC (Fixed)”.
E
“Energy save” status icons
Icon Description
“Energy save” is set to “Standard”.
“Energy save” is set to “Advanced”.
When “Energy save” is set to “Standard” or
“Advanced”, “Energy save” status icons appear
in the “Picture” menu and channel information
windows.
ECO
No signal off
When set to “Enable”, the TV will automatically
enter standby mode if there is no signal input for 15
minutes.
NOTE
Even if a TV programme finishes, this function may not
operate because of interference from other TV stations
or other signals.
ECO
No operation off
The TV will automatically enter standby mode if no
operations are performed in three hours if “Enable”
is selected.
NOTE
Five minutes before the TV enters standby mode, the
remaining time displays every minute.
ECO
Sleep timer
Allows you to set a time when the TV automatically
enters standby mode. You can set the time span for
entering standby mode after selecting “Change”.
NOTE
Select “Off” to cancel the sleep timer.
When the time has been set, countdown automatically
starts.
Five minutes before the preset of time expires, the
remaining time displays each minute.
Basic adjustment
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-70LE741E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-70LE741E in the language / languages: English as an attachment in your email.

The manual is 7,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-70LE741E

Sharp LC-70LE741E User Manual - German - 80 pages

Sharp LC-70LE741E User Manual - Dutch - 80 pages

Sharp LC-70LE741E User Manual - French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info