679566
46
Zoom out
Zoom in
Previous page
1/52
Next page
46
UPDATING SOFTWARE
Updating Software
There are a number of ways in which the software on your set can be updated. When your set is
produced, the software installed will ensure the correct operation of the set, this may need to be updated
should improvements be made and this is normally carried out automatically if the set is connected to the
internet. For sets which do not have internet connectivity or are not connected to the internet, updates
can be made via the USB socket on the back of the set.
Note: If your set is outside of guarantee and the installation of the software causes a different issue you
may be liable for a chargeable repair service. The reason for this is because you may have an inherent
fault which can cause corruption on one of the boards when installing the software. This could result
in your unit locking into SAFE mode whereby it is stuck in standby. This is not a fault with the software,
this would be caused by an existing faulty board that would have required a repair.
If you experience issues installing your software, and you do get locked into safe mode, you may wish to
try reinstalling the software on an alternate USB as sometimes if the TV cannot read the update due to
the USB Format/type.
Note: For further support with software updates, contact our technical support team or refer to the
‘Product Support’ section of the website. If the TV is using the newest software available it will not
attempt to update the software.
OTA
Over the internet update. You will be noti ed when an OTA update is available for your set.
When the software is downloading and then updating, do not power down the set. This will
interrupt the process and may corrupt the set.
USB
Software can be uploaded onto your set via a USB stick. Only use software recommended by
the manufacturer for this.
OAD
Over Air Download. Similar to OTA, but data is sent to the set via the Digital Television system.
Initial Document.indd Sec1:46Initial Document.indd Sec1:46 26/11/2018 09:46:2126/11/2018 09:46:21
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-60UI9362 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-60UI9362 in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info