525777
18
Zoom out
Zoom in
Previous page
1/80
Next page
16
Searching for satellite broadcasts
(840 series only)
Press a/b to select “Satellite search”, and then
press ;.
Digital search
Analogue search
Satellite search
The antenna connection setting screen is displayed.
Single satellite
2 satellites on toneburst switchbox
Max. 4 satellites on DiSEqC multiswitch
Communal satellite system
NOTE
You can select the antenna connection method from the
four types. Consult your dealers before using a method
other than “Single satellite”.
E
“Single satellite” setting
1 Press a/b to select “Single satellite”, and then
press ;.
2 Press a/b/c/d to select your favorite
satellite, and then press ;.
Euro Bird 1
Atlantic Bird 1
NOTE
Follow the instructions on the screen for “2 satellites
on toneburst switchbox”, “Max. 4 satellites on DiSEqC
multiswitch” and “Communal satellite system” settings.
To set multiple satellite channels, go to “Max. 4 satellites
on DiSEqC multiswitch”.
When a power supply is needed for your satellite
antenna, follow the procedure below in order to supply
the voltage specified by your service provider, etc.:
Go to “HOME” > “TV Menu” > “Setup” > “View setting” >
“Channel settings” > “Antenna setup-DIGITAL” >
“Satellite setup” > “Change setting” > “Communal
satellite system”.
E
Search start:
DVB-S/S2 channel searching.
1 Press c/d to select “Yes”, and then press ;.
To change the settings for “Scrambled stations” or
“Symbol rate”, press a/b to select the item to be
reconfigured and then perform “Search start”.
Yes No
Scrambled stations
SAT1-Symbol rate 1
SAT1-Symbol rate 2
Search start
[Yes]
2 The TV searches for and stores all the receivable
TV stations according to their settings and the
connected antenna.
Select “Yes” to sort the search result in alphabetical
order.
To abort the initial auto installation in progress,
press 6.
NOTE
Scrambled stations: Specifies if you need to choose
pay-TV services.
Follow the procedure to perform “Manual search” if you
want to configure the frequency or symbol rate and start
to search after performing the auto searching during the
initial auto installation.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Channel settings” > “Programme setup” >
“Satellite setting” > “Manual search”.
Symbol rate: You need to set each symbol rate of all
the satellite broadcasts that the TV can receive (eight
is the maximum number of symbol rates that can be
displayed).
Initial auto installation
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-60LE840E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-60LE840E in the language / languages: English as an attachment in your email.

The manual is 7,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-60LE840E

Sharp LC-60LE840E User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info