475404
69
Zoom out
Zoom in
Previous page
1/80
Next page
67
Appendix
Troubleshooting
Problem Possible solution
No power. Is the AC cord disconnected?
Check if you pressed a on the TV.
The TV cannot be
operated.
External influences such as lightning, static electricity, etc.,
may cause improper operation. In this case, operate the TV
after first turning off the power, or unplugging the AC cord
and re-plugging it in after one or two minutes.
Remote control unit
does not operate.
Are batteries inserted with polarity (e, f) aligned?
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminating to the remote control
sensor?
Picture is cut off. Is the image position correct?
Are screen mode adjustments (Wide mode) such as picture
size made correctly? (Pages 40, 51 and 52)
• Strange colour,
light colour, or dark
colour, or colour
misalignment.
Adjust the picture tone.
Is the room too bright? The picture may look dark in a room
that is too bright.
Check the “Colour system” setting (Pages 37 and 42).
Power is suddenly
turned off.
The TV’s internal temperature has increased. Remove any
objects blocking the vent or clean.
Is the “Sleep timer” set? Select “Off” from the “Sleep timer”
menu (Page 34).
Is “No signal off” or “No operation off” activated? (Page 34)
No picture. Are connections to external equipment correct?
(Pages 23_28)
Is the input signal type selected correctly after connection?
(Page 41)
Is the correct input source selected? (Page 18)
Is a non-compatible signal being input? (Page 54)
Is the picture adjustment correct? (Pages 31_32)
Is the antenna connected properly? (Page 9)
No sound. Is the volume too low?
If you do not clearly hear the sound for the visually impaired,
go to “HOME” > “TV Menu” > “Setup” > “Audio” > “Audio
description setting” > “Mix level”, and select the upper level
to turn up the volume.
Make sure that headphones are not connected.
Check if you pressed e on the remote control unit.
Is the proper item selected in the “Audio select” menu
when connecting devices to the HDMI 2 terminal or the PC
terminal? (Pages 24, 26 and 41)
The TV sometimes
makes a cracking
sound.
This is not a malfunction. This happens when the cabinet
slightly expands and contracts according to changes in
temperature. This does not affect the TV’s performance.
Net TV start page
cannot be displayed.
Is the ETHERNET cable connected correctly? (Page 57)
Check the settings of “Network setup” (Pages 57–58).
• Some Internet
functions used on a
PC are not available
from the TV.
The TV has only limited functions compared with regular PC
browsers (Page 59).
Reset the PIN
1 Go to “HOME” > “TV Menu” > “Setup”.
2 Press a/b to select “Auto installation”, “Programme setup”, “PIN”,
“Parental rating” or “Reset”, and then press ;. The PIN input window will
display.
3 Press and hold both :r and i+ on the TV simultaneously until the
message appears on the screen.
NOTE
When the PIN code is reset, the default PIN code (“1234”) is set.
The PIN is also available for the Net TV function.
Reset
If complex adjustments are made so that the settings cannot be restored to
normal, you can reset the settings to the factory preset values.
1 Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Reset”.
2 Press c/d to select “Yes”, and then press ;.
“Now, TV will restart automatically, OK?” displays on the screen.
3 Press c/d to select “Yes”, and then press ;.
“Now initialising...” displays on the screen and blinks.
After the reset has completed, the power shuts off and then comes back on. The
screen will have returned to its original settings.
NOTE
PIN input is required when executing “Reset”. The default PIN is “1234”. To change the
PIN setting, refer to Individual setting — PIN (Page 38). To reset the PIN setting (PIN
input will no longer be needed), refer to Reset the PIN shown above.
“Reset” is greyed out in 3D mode. To select the “Reset” menu, you need to switch to 2D
mode.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-60LE740E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-60LE740E in the language / languages: English as an attachment in your email.

The manual is 7,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-60LE740E

Sharp LC-60LE740E User Manual - German - 80 pages

Sharp LC-60LE740E User Manual - Dutch - 80 pages

Sharp LC-60LE740E User Manual - French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info