13335
31
Zoom out
Zoom in
Previous page
1/78
Next page
30
DisableEnable
Basic adjustment settings
No signal off
When set to “Enable”, the power will automatically shut
down if there is no signal for 15 minutes.
Press a/b to select “No Signal Off”, and
then press ENTER.
Press c/d to select “Enable”, and then
press ENTER.
Five minutes before the power shuts down, the
remaining time displays every minute.
NOTE
“Disable” is the factory preset value.
When a TV program finishes, this function may not operate.
Press c/d to select “Power Control”.
Press MENU and the MENU screen displays.
No operation off
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
Press a/b to select “No Operation Off”, and
then press ENTER.
Press c/d to select “Enable”, and then
press ENTER.
Five minutes before the power shuts down, the
remaining time displays every minute.
NOTE
“Disable” is the factory preset value.
Repeat steps 1 and 2 in No signal off.
Power Control
Power control setting allows you to save energy.
Power control for AV source
1
2
3
4
1
2
3
Power control for PC source
Power control setting allows you to save energy.
Power management
When set, the power will automatically shut down.
Press a/b to select “Power Management”,
and then press ENTER.
Press a/b to select “Mode1” or “Mode2”,
and then press ENTER.
Description
No power management
Factory preset value.
If no signal inputs for 8 minutes, the power
shuts down.
Even if you start using the PC and the signal
inputs again, the TV stays off.
The TV turns on again by pressing TV
POWER on the remote control unit (See
page 15).
Pressing POWER on the TV will have the
same result.
If no signal inputs for 8 seconds, the TV
enters standby mode.
When you start using the PC and the signal
inputs again, the TV turns on.
Selected item
Off
Mode1
Mode2
Repeat steps 1 and 2 in No signal off.
NOTE
When using a digital PC and setting “Mode2” in Power
management, the power may not turn back on
automatically even if the signal inputs again.
If you turn off the power by disconnecting AC cord when
setting “Mode2” in power management, the TV may not
function properly after turning the power on again. In such
case, press TV POWER on the remote control unit.
Pressing POWER on the TV will have the same result.
1
2
3
Off
Mode1
Mode2
Press MENU to exit.
5
Press MENU to exit.
4
Press MENU to exit.
4
LC-57D90U(E)-026-031 06.1.12, 2:45 PM30
Black
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-57D90U Operation Manual at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-57D90U Operation Manual in the language / languages: English as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info