635746
60
Zoom out
Zoom in
Previous page
1/72
Next page
User manual
Benutzerhandbuch
Manuel d'utilisation
Manuale di istruzioni
Manual de instrucciones
Manual do utilizador
Instrukcja obsługi
Gebruikershandleiding
models: | modelle: | modèles: | modelli: | modelos: | modelos: | modele: | modellen:
LC-32CFE6452E
LC-40CFE6452E
LC-43CFE6452E
LC-49CFE6452E
LC-55CFE6452E
7
8
9
0
1
2
3
4
5
6
TV
GUIDE
VOL
CH
SOURCE
SOUND
PICTURE
ON/OFF MUTE
TEXT
SUBTITLE
INFO
TV
BACK
FAV
NET+
MEDIA
GOTO
A-B
3D
REPEAT
REC LIST
PVR/MEDIA
EXIT
MENU
OK
2
3
8
9
6
5
12
13
15
19
22
26
30
27
1
7
10
4
11
14
17 18
21
16
20
23
24 25
28 29
31
EN
Important safety instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Please, read these safety instructions and respect
the following warnings before the appliance is
operated:
In order to prevent  re always
keep candles and other open
ames away from this product.
TVswith the weight of more than 20 kg must be lifted and carried by at
least two people.
This TV does not contain any parts which could be repaired by the user.
In case of afault, contact the manufacturer or the authorised service
agent. Contact with certain parts inside the TV might endanger your life.
The guarantee does not extend to faults caused by repairs carried out by
unauthorized third parties.
Do not remove the rear part of the appliance.
This appliance is designed for the receiving and reproduction of video
and sound signals. Any other use is strictly forbidden.
Do not expose the TV to dripping or splashing liquid.
To disconnect the TV from mains please unplug the mains plug from the
mains socket.
If the supply cord is damaged, it must be replaced by the manufacturer,
aservice agent or similarly quali ed persons in order to avoid ahazard.
The ideal distance to watch TV is approximately  ve times longer than
the diagonal of the screen. Re ections on the screen from other light
sources can make the quality of the picture worse.
Ensure the TV has su cient ventilation and is not close to other appli-
ances and other pieces of furniture.
Install the product at least 5 cm from the wall for ventilation.
Ensure that the ventilation openings are clear of items such as newspa-
pers, table-cloths, curtains, etc.
The TV set is designed to be used in amoderate climate.
The TV set is designed exclusively for operation in adry place. When
using the TV outside, please, make sure it is protected against moisture
(rain, splashing water). Never expose to moisture.
Do not place any objects, containers  lled with liquids, such as vases,
etc. on the TV. These containers might get pushed over, which would
endanger electric safety. Place the TV exclusively on  at and stable
surfaces. Do not place any objects such as newspaper or blankets, etc.
on or under the TV.
Make sure the appliance does not stand on any power cables as they
might get damaged. Mobile phones and other devices such as WLAN
adapters, monitoring cameras with wireless signal transmission, etc.
might cause electromagnetic interference and they should not be
placed near the appliance.
Do not place the appliance near heating elements or in aplace with
direct sunlight as it has anegative e ect on cooling of the appliance.
Heat storage is dangerous and it can seriously reduce the lifetime of the
appliance. In order to ensure the safety, ask aquali ed person to remove
the dirt from the appliance.
Try to prevent damage to the mains cable or mains adapter. The appli-
ance can only be connected with the supplied mains cable/ adapter.
Storms are dangerous for all electric appliances. If the mains or aerial
wiring is struck by lightening the appliance might get damaged, even if
it is turned o . You should disconnect all the cables and connectors of
the appliance before astorm.
To clean the screen of the appliance use only adamp and soft cloth. Use
only clean water, never detergents and in no case use solvents.
Position the TV close to the wall to avoid the possibility of it falling when
pushed.
WARNING - Never place a television set in an unstable location. A televi-
sion set may fall, causing serious personal injury or death. Many injuries,
particularly to children, can be avoided by taking simple precautions
such as:
Use cabinets or stands recommended by the manufacturer of the
television set.
Only use furniture that can safely support the television set.
Ensure the television set is not overhanging the edge of the supporting
furniture.
Not place the television set on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and the television set
to a suitable support.
Not place the television set on cloth or other materials that may be
located between the television set and supporting furniture.
Educate children about the dangers of climbing on furniture to reach the
television set or its controls.
Ensure that children do not climb or hang onto the TV.
If your existing television set is being retained and relocated, the same
considerations as above should be applied.
The instructions shown below are asafer way to set up the TV, by fixing it
to the wall and will avoid the possibility of it falling forwards and causing
injury and damage.
This method is also useful the TV is placed on aglass surface or you do
not wish to screw anything into your furniture.
For this type of installation you will need afastening cord
A) Using one/both of the top wall-mounting holes and screws (the
screws are already supplied in the wall mounting holes) fasten one end
of the fastening chord/sto the TV.
B) Secure the other end of the fastening chord/sto your wall.
The software on your TV and the OSD layout can be changed without
notice.
Warning:
Never connect any external devices to alive appliance. Switch o not
only the TV but also the devices which are being connected! Plug the
TV plug into the wall socket after connecting any external devices and
the aerial!
Always make sure there is free access to the TV mains plug.
The appliance is not designed for ause in aworkplace  tted with
monitors.
The systematic use of headphones at high volume might lead to irrevers-
ible hearing damage.
Ensure environmental disposal of this appliance and any components
including batteries. When in doubt, please, contact your local authority
for details of recycling.
While installing the appliance, do not forget that furniture surfaces are
treated with various varnishes, plastics, etc. or they might be polished.
The chemicals contained in these products might have areaction with
the TV stand. This could result in bits of the material sticking to the furni-
ture surface, which are di cult to remove, if not impossible.
The screen of your TV has been produced under top quality conditions
and was checked in detail for faulty pixels several times. Due to the tech-
nological properties of the manufacturing process, it is not possible to
eliminate the existence of asmall number of faulty points on the screen
(even with maximum care while in production). These faulty pixels are
not considered faults in terms of guarantee conditions, if their extent is
not greater than the boundaries de ned by DIN norm.
5
The manufacturer cannot be held responsible, or be liable, for customer
service-related issues related to the third party content or services. Any
questions, comments or service-related inquiries relating to the third
party content or service should be made directly to the applicable
content or service provider.
There are a variety of reasons you may be unable to access content or
services from the device unrelated to the device itself, including, but not
limited to, power failure, the Internet connection, or failure to con gure
your device correctly. Universal Media Corporation, its directors, o cers,
employees, agents, contractors and a liates shall not be liable to you
or any third party with respect to such failures or maintenance outages,
regardless of cause or whether or not it could have been avoided.
All third party content or services accessible via this device is provided to
you on an “as-is and “as available” basis and Universal Media Corporation
and its a liates make no warranty or representation of any kind to you,
either express or implied, including, without limitation, any warranties
of merchantability, non-infringement,  tness for a particular purpose
or any warranties of suitability, availability, accuracy, completeness, se-
curity, title, usefulness, lack of negligence or error-free or uninterrupted
operation or use of the content or services provided to you or that the
content or services will meet your requirements or expectations.
‘Universal Media Corporation is not an agent of and assumes no
responsibility for the acts or omissions of third party content or service
providers, nor any aspect of the content or service related to such third
party providers.
In no event will ‘Universal Media Corporation’ and/or its a liates be
liable to you or any third party for any direct, indirect, special, incidental,
punitive, consequential or other damages, whether the theory of liability
is based on contract, tort, negligence, breach of warranty, strict liability
or otherwise and whether or not Universal Media Corporation and/or its
a liates have been advised of the possibility of such damages.
Important information regarding use of video
games, computers, captions and other  xed image
displays.
The extended use of  xed image program material can cause aperma-
nent “shadow image “ on the LCD screen (this is sometimes incorrectly
referred to as “burnout to the screen“). This shadow image is then perma-
nently visible on the screen in the background. It is irreversible damage.
You can avoid such adamage by following instructions below:
Reduce the brightness/contrast setting to aminimum viewing level.
Do not display the  xed image for along period of time. Avoid display-
ing of:
» Teletext time and charts,
» TV/DVD menu, e.g. DVD contents,
» In the„Pause“ mode (hold): Do not use this mode for along time,
e.g. while watching aDVD or avideo.
» Turn o the appliance if you are not using it.
Batteries
Observe the correct polarity when inserting the batteries.
Do not expose batteries to high temperatures and
do not place them on locations where the tempera-
ture might increase quickly, e.g. near the  re or on
the direct sunshine.
Do not expose batteries to excessive radiant heat,
do not throw them into the  re, do not disassemble
them and do not try to recharge un-rechargeable
batteries. They could leak or explode.
» Never use di erent batteries together or mix
new and old ones.
» Dispose of batteries in an environmentally friendly way.
» Most of the EU countries regulate the disposal of batteries by law.
Disposal
Do not dispose of this TV as unsorted municipal waste.
Return it to adesignated collection point for the recycling
of WEEE. By doing so, you will help to conserve resources
and protect the environment. Contact your retailer or local
authorities for more information.
CE Statement:
Hereby, Universal Media Corporation s.r.o. declares that this LED TV
is in compliance with the essential requirements and other relevant
provisions of R&TTE Directive 1999/5/EC. http://www.sharp.eu/av/
documents-of-conformity
Trademarks
The terms HDMI and HDMI High-De nition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing, LLC in the United States and other countries.
The “HD TV” Logo is atrademark of DIGITALEUROPE.
The “HD TV 1080p Logo is atrademark of DIGITALEUROPE.
The DVB logo is the registered trademark of the Digital Video Broad-
casting - DVB - project.
Manufactured under license from Dolby Laboratories. Dolby, Dolby
Audio and the double-D symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS Licensing Limited. DTS, the Symbol, & DTS and the
Symbol together are registered trademarks, DTS TruSurround and
DTS 2.0+Digital Out are trademarks of DTS, Inc. © DTS, Inc. All Rights
Reserved.
YouTube and the YouTube logo are trademarks of Google Inc
The Wi-Fi CERTIFIED Logo is a certi cation mark of the Wi-Fi Alliance.
Wi-Fi CERTIFIED Miracast and Miracast are trademarks of Wi-Fi Alliance
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service
marks, or certi cation marks of the Digital Living Network Alliance.
MHL and the MHL logo are a trademark, registered trademark or
service mark of MHL, LLC in the United States and /or other countries.
The Bluetooth word mark and logos are registered trademarks owned
by Bluetooth SIG,. Inc.
Cd
EN
What is included in the box
Supply of this TV includes following parts:
• 1x TV • 1x RF cable
1x Remote control 1x TV stand installation packet
2x AAA batteries 1x User guide
1x Mini Component adapter
cable
1x Mini Composite adapter
cable
Attaching the Stand
Please follow the instructions on last page of this user manual.
Getting started - initial set up
1. Insert the batteries supplied into the Remote control.
2. Using the RF cable supplied, connect the TV to the TV Aerial wall
socket.
3. For connecting to the Internet with a wired connection, connect a
Cat 5/Ethernet cable (not included) from the TV to your broadband
modem/router.
4. Connect the power cable to the Electrical outlet and switch the TV on
by using the standby button on the TV.
5. You will be now welcomed with the First Time Installation screen. If
it does not appear, press the standby button on the TV set once, this
will prompt the ‘pairing menu to appear. Scroll through and highlight
‘Pair your remote’ by pressing the CH+/CH- TV button (scroll up/
down function in the menu) then press the TV sets standby button
(OK function in the menu) to con rm your selection. Please press
and hold the yellow and green buttons for a few seconds on the
remote control, until white LED on TV front blinked  ve times.
Press [MENU] then 8-8-8-8 and the First Time Installation screen will
appear.
If you wish to make changes to any of the default settings, use the
scroll ▲/▼/◄/► buttons. To exit this menu at anytime, press [EXIT]
button.
6. Please set desired settings in FIRST TIME INSTALLATION screen.
DVB Antenna - You can choose between Terrestrial (DVB-T), Cable
(DVB-C) or Satellite (DVB-S)*.
Language - Set the TV Menu language.
Country - Set the desired country.
Tunning Mode - Choose if you want to tune only Digital (DTV)
Analogue (ATV) or both Digital and Analogue (DTV + ATV)
Operator - Select Cable provider. If your cable operator is not listed
select Others. (Avaliable only if DVB Antenna is set to CABLE)
Environment - Select the location of TV.
For home use, please select Home Mode.
For shop demonstration mode, set Store Mode.
Sorting by LCN - Set LCN to ON if you want to arrange channels by
provider preferences (only applies to DVB-T and DVB-C channels).
7. Press [Auto Tuning] button to start the tuning process.
8. Optional channel presets DVB-C:
Keep all default settings as recommended.
If DVB-C channels are not found, contact your network provider for the
valid "Network ID". Then perform anew search. Press the [MENU], select
"Network ID" and enter the network ID.
9. Optional channel presets DVB-S2: Select "Satellite" in the "DVB
Antenna" in the menu for the optional channel presets. Here you can
choose between the various satellites. Since selection completed, then
the channel list of the exact satellite will be available to be imported
into your TV system.
Con rm with [OK] button on the remote control, to start scanning.
TIP: If you are missing channels, the reason for this is likely to be signal
strength, you should consider connecting signal booster and re-tuning the TV.
Remote control
Radio controlled remote control - No more aiming in the TV direction!
Refer to remote control picture on the second page of this user
manual.
1.
STANDBY – Switch on TV when in standby or vice versa.
2.
MUTE – Mute the sound or vice versa.
3. 0 – 9 – to select aTV channel directly.
4. TV GUIDE – Opens the 7 Day TV Guide (Digital mode).
5.
To return to the previous channel viewed.
6. PICTURE Scrolls through picture mode options.
7. VOL ▲/▼ To increase / decrease the sound level.
8. CH ▲/▼To increase or decrease the channel being watched.
9. SOUND Scrolls through sound mode options.
10. SOURCE To display the input/source menu.
11. MENU To display OSD menu.
12. EXIT To exit all menus.
13. (▲/▼/◄/►/ OK) – Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
14. BACK Back to previous menu.
15. FAV To display favourites menu.
16. INFO Press once for now/next channel information. Press twice for
programme information about current programme.
17. TEXT Teletext mode - To enter Teletext
18. SUBTITLE To switch the dialogue at the bottom of the screen (on/
o ).
19. TV Switch to digital TV source.
20. YouTube Displays YouTube application
21. MEDIA Switch to USB source.
22. NET+ Displays AQUOS NET+ menu.
23. Rec
1
PVR Record
24.
To restart the current chapter
25.
To advance forward to the next chapter
26.
To stop the playback
27. Rec List
1
Opens the list of recordings.
28.
To play in fast rewind mode.
29.
To play in fast forward mode.
30.
To play/pause
31. COLOUR BUTTONS
Additional teletext and OSD functions
1
- available only with PVR function
7
*
TV buttons & Source menu
Vol+ Volume up and menu right
Vol- Volume down and menu left
CH+ Programme/Channel up and menu up
CH- Programme/Channel down and menu down
MENU Displays Menu/OSD
SOURCE Displays the input source menu
STANDBY Standby Power On/O
Choosing Mode Input/Source
To switch between the di erent input/connections.
a) Using the buttons on the remote control:
1. Press
[SOURCE/ AV] - The source menu will appear.
2. Press
[] or [] to select the input you require.
3. Press
[OK].
b) Using the buttons on the Television:
1. Press
[SOURCE].
2. Scroll up / down using
CH+/ CH- buttons to the input/source you
require.
3. Press
Vol+ to change input/source to the one selected.
Connections
Please see the table for connector types for
di erent models available on the page 12.
USB
USB-Input 1, 2
HDMI 1, 2, 3(MHL) in
HDMI-Input 1, 2, 3
VGA (PC)
VGA PC-Input
VGA (PC) Audio In
3.5mm PC audio input
Mini AV
Video Input & Component / Video audio input
Mini YPbPr
Mini Component HD Input
SCART
SCART-Input
CI Card IN
CI input
RF In
RF / TV Aerial Input
Sat In
Satellite Input
Digital Optical Audio Out
Digital optical output
RJ 45
Ethernet
HEADPHONES
3.5mm Headphone output
TV Menu navigation
To access this menu, press [MENU] button on the remote control. To enter
amenu press
[OK]. If you wish to make changes to any of the default
settings, use the scroll
(▲/▼/◄/►) buttons. To con rm any settings press
[OK] button. To exit this menu at anytime, press [EXIT] button.
Picture
Picture Mode - Choose from the following presets.
Standard - Default settings
Dynamic - Recommended settings for fast moving pictures
Mild - Set to be lighter in colour and less bright
Personal - Lets you manually alter all the settings
Eco - Consume 15% less energy.
Contrast - Switch the balance between black and white.
Brightness - Increase or decrease the brightness of the picture.
Tint - Lets you increase or decrease the level of tint
within the picture (for NTSC signal only)
Colour - Increases the colour from black and white.
Sharpness - Increase or decrease the sharpness of the picture.
Backlight adjusting - Adjust the screen's brightness by
increasing/decreasing the panel's backlighting.
Colour Temperature - Choose from the following presets.
Normal - Default settings
Warm - Increases red within the picture
Cold - Increases blue within the picture
Red - Adjust red tone of the picture
Green - Adjust green tone of the picture
Blue - Adjust blue tone of the picture
Gamma - Adjust the tones between the bright
and dark parts of the picture.
Aspect Ratio - Picture format varies depending on the channel/broadcast.
There are a number of di erent options to best meet your needs.
Auto-Automatically displays the best picture format.
So the picture is in the correct position. May have
black lines at the top/bottom and/or sides.
4:3 - Displays the 4:3 picture in its original size.
Side bars are shown to  ll the 16:9 screen.
16:9 - Fills the screen with a regular 16:9 signal.
Zoom 1/2 - The picture is the correct proportion
but zoomed in to  ll the screen.
Dot by Dot (HDMI) - Will display the picture in its
original resolution without any change.
Full Screen - Stretch signal to  ll the screen.
Noise Reduction - Filters and reduces the
noise (interference) of the picture
MPEG Noise Reduction - Allows you to reduce visible
interference caused by MPEG compression.
Active Contrast - Automatically optimises the ‘backlight’ and
contrast’ of the picture according to the brightness of the screen.
Sound
Sound Mode - Choose from the following presets
Standard - Default settings
Music - Emphasises music over voices
Movie - Provides live and full sound for movies
Personal - Selects your personal sound settings
Sports - Emphasises sound for sports
Tip: Treble and bass levels can only be adjusted when the sound mode
‘Personal’ is selected.
68.
EN
Equalizer - Adjusts the volume of di erent sound
frequencies. The equalizer sound levels can only be adjusted
when the sound mode ‘Personal’ is selected.
Balance - To switch the sound between the left and right speakers.
Auto Volume Level (AVL) - When ‘on is selected, the volume
will stay at aconstant level regardless of input/source.
DTS TruSurround - Allows you to turn surround sound e ect ON or OFF.
Digital Output - This is the digital Audio output.
Choose from the following options:
O - O
Auto - Selects the best settings automatically
PCM - Select this option if you are connecting to aStereo
Hi- via digital cable (Pulse-code modulation (PCM) is
adigital representation of an analogue signal)
Audio Description - Additional sound track for visually impaired.
Available only on selected DTV shows.
AD Volume - to adjust volume of Audio Description sound track
Audio Delay (ms) - Enables the user to adjust sound
setting to sync picture and audio for TV speakers.
SPDIF Delay (ms) - Enables the user to adjust sound setting to sync picture
and audio for external speakers connected via digital audio output.
PC
Auto Adjust - Lets you automatically con gure the
television to be used as acomputer monitor.
H O set - Changes the horizontal position of the picture.
VO set - Changes the vertical position of the picture.
Size - increase picture size.
Phase - To adjust delay time of phase in order to reduce the noise of picture
TIP: If the computer is left in-active for aperiod of time, the
television will switch into a‘sleep’ state (the screen will power o
to save power). To switch back on press the standby button.
TIP: If you do not press any buttons for 10 seconds, the menu
will automatically exit. You can change the length of time before
the menu exits automatically - see ‘OSD Timer’ section.
Channel
DVB Antenna - Set the type of DTV signal
– Terrestrial - Terrestrial (DVB-T)
– Cable - Cable (DVB-C)
Auto Tuning - Allows you to retune the television for all digital
channels, digital radio stations and analogue channels.
Analogue Manual Tuning - Allows you to
manually tune your analogue signal.
Digital Manual Tuning - Allows you to manually tune your digital signal.
Channel Edit - Allows you to delete, skip and add favourite channels.
Signal Information - Information about DVB signal.
CI Information - Pay per view services require a“smartcard” to be
inserted into the TV. If you subscribe to apay per view service the
provider will issue you with a‘CAM’ and a“smartcard”. The CAM can
then be inserted into the COMMON INTERFACE PORT (CI Card In).
Recorded list - List of recorded TV shows.
Schedule List - Lists your programme reminders.
Dish Setup - This menu is only available in DVB-S2 mode. You can
select the type of satellite, your transponder and your LNB type, etc.
Lock
System Lock - Allows you to lock or unlock the menu. You will be
asked to enter a4 digit password. Use the button to quit the
password input. Use the button to clear. Default password is 0000.
Set Password - Change the default password.
Channel lock - Lock speci c TV channels.
Parental Guidance - Lock TV channels based on age restriction.
Key Lock - Lock the TV buttons.
– O - All TV buttons are unlocked
– Partial - Only Standby button is unlocked
– Full - All TV buttons are locked
Time
Clock - Set the date and time. Date and time is
set up automatically in DVB mode.
O Time - Allows you to set aspeci c time for your TV to turn o .
On Time - Allows you to set aspeci c time for your TV to turn on, the
channel it will then display, the source it will be on and also the volume.
This function can then be toggled to repeat every day or acertain day.
Sleep Timer - Lets you set the sleep timer so the television automatically
switches o after aset amount of time. O -> 10min -> 20min ->
30min -> 60min -> 90min -> 120min -> 180min -> 240min.
OSD Timer - Lets you adjust the amount of time the On
Screen Menu stays on the screen before disappearing.
Auto standby - Adjustment for the auto standby in
hourly increments: O -> 3h -> 4h -> 5h.
Time Zone - Change your current time zone.
Network
Network Con guration - First you will need to select your connection
type. You can choose between either a Wi-Fi or Wire (cable) connection.
NOTE: For connecting to the Internet with a wired connection, connect a Cat
5/Ethernet cable (not included) from the TV to your broadband modem/router.
IP Con guration - LAN network connection settings
Auto - Will automatically connect the TV to your home network
(this is the default setting and is highly recommended)
Manual - Allows you to manually change the IP,
Netmask, Gateway and DNS information.
Wi–Fi Con guration - Wireless network connection settings
Wi–Fi Auto Search - Automatically searches for available wireless
networks. Select the desired Wi–Fi network and then enter the
network password (if network is password protected). Once
the password is accepted, you will not be asked for it again.
NOTE: The connection process may take a few minutes, please be
patient. Every time the TV is then powered on it will automatically
connect to the network, this may also take some time.
Network Info - Information about the network settings
Network Test - A network connection test
Settings
Language - Allows you to change the language of the menu.
Audio Languages - Allows you to change audio
language on selected DVB channels.
Subtitle Language - Allows you to change subtitles
language on selected DVB channels.
Hearing Impaired - If signal provides support for the hearing
impaired, the subtitles can be played by pressing the “Subtitle”. If
9
you set Hearing Impaired ON and switch to achannel with supports
for hearing impaired subtitles will be activated automatically.
Blue Screen - Changes the background when there is no input between
transparent and ablue background (Only available on some sources).
PVR File System - PVR Recording options*
Select disk - Select USB port and disk partition
TimeShift Size - Set size time of shift bu er.
Format Start - You can format connected USB
storage device to FAT 32  le system.
WARNING: ALL DATA ON THE USB DEVICE WILL BE DELETED
Speed check - Tests write speed of connected USB storage devices.
* - only for devices with built in PVR function
First Time Installation - Starts the  rst time installation.
Software Update (USB) - From time to time we may release new
rmware to improve the operation of the television (available to
download). This menu lets you install the new software/ rmware onto
the television. Further details of how to do this will be issued with the
rmware. Contact the helpline or refer to the ‘www.sharp.eu website.
Software Upgrade (NET) - Allows for the TV software to be updated over
the Internet. This function will search for new software and update it when
necessary. For this function the TV needs to be connected to the internet
and USB storage device with at least 200MB of free space connected to it.
NOTE: The TV will automatically search for new releases of software every
time it is turned on. If new software is found, it will ask you if you would
like to download and install it. If you select "Yes" the TV will upgrade
to the latest software. It is necessary to connect a USB storage device
to the TV with at least 200 MB of free space, before upgrade starts.
WARNING: Do not turn o the TV’s power until the upgrade is complete!
Reset TV - This resets the menus to factory settings.
HDMI CEC* - Allows you to operate devices
connected via HDMI with TV remote control.
Auto standby* - Automatically turn on/
o connected devices via HDMI CEC
Device list* - Allows you to access devices menu and
operate the menu using TV remote control.
HDMI ARC* - Sends audio signal from terrestrial/satellite broadcast
via HDMI to the AV receiver without using any additional audio
cables, this functions is available only on HDMI 2 output.
* - HDMI CEC must be supported by connected device.
LED Status - Allows the user to switch the LED Power indicator light ON
or OFF, when the TV is being operated. (When this option is set to OFF
the LED Power indicator light will flash when the remote control is used)
Version Info - shows version of TV software
Store Mode* - switch ON/OFF shop demonstration mode
* - available only if store mode was selected during  rst time installation
APPLICATIONS
AQUOS NET+ - Opens the Sharp SMART portal.
USB Media - Multimedia mode o ers the playback of various
content saved on a USB Memory Stick. The content will be divided
into various  le types: Photo, Music and Movie. The ‘File Option’
will show and allow you to play all types of supported content.
1. You can navigate through the menu using the scroll ▲/▼/◄/►
buttons. To con rm the item you wish to play/view press [OK] button.
2. Select the drive you require. (If your drive only has 1 partition you will
only see 1 item).
3. You can now access the item. Press OK to view.
4. While viewing content you can control the playback modes using the
remote control buttons or by bringing up the playback navigation
menu and selecting on-screen buttons ▲/▼/◄/► and [OK]
NOTE: USB extension cables are not recommended as
they can cause a reduction in picture/audio quality and
stoppages during play back of USB content.
Media Server - Automatically searches for digital media servers
(DMS) connected to your home network and enables the
playback and rendering of content from media servers
NOTE: ‘Media Server’ is not provided by the TV manufacturer, you can
download third party software and install it on your computer or NAS.
Wireless Connection - Allows you to view content from your smart phone
or notebook on the TV screen via Miracast or Intel Wireless Display.
Miracast connections are formed using Wi-Fi Direct, so access to a Wi-Fi
network is not needed. You can share content from your smartphone or
tablet based on Android 4.4 and newer system.
Wireless Display (WiDi) lets you easily stream movies, videos, photos
and music directly to your TV screen. You’ll need a laptop, smartphone,
or tablet with Intel® WiDi technology.
NOTE: This function is only available on selected smart phones and notebooks.
AQUOS NET+
To access the AQUOS NET+ Menu at any time press the NET+ button on the
remote control or select it from TV Multimedia menu.
NOTE: Please wait while the TV connects to the Wi-Fi network.
It may take a few minutes after you switch on the TV.
Navigate the menu using the scroll ▲/▼/◄/► buttons. To con rm the
item you wish to play/view press [OK] button. For one-step back press
[Menu] button, and to access additional functions use the coloured
buttons. To leave AQUOS NET+ press [EXIT] button.
Home - Home screen with recommended movies
and recently opened applications
Browser - Opens the default web browser.
Red Button - Zoom in
Green Button - Zoom out
Yellow Button - Refresh page
Blue Button - Return to browser home screen.
Movies - Opens a list of available movies
TV Shows - Opens a list of available TV shows
Music - Opens a list of available Music and Music videos
Watchlist - Opens a list of movies you can select to watch later.
Apps - Opens a list of available applications
Login - Create an account or login to existing
account to personalize your AQUOS NET+.
Settings - Filter application based on selected languages.
RESET OF USER SETTINGS: If you wish to completely reset all user
settings on AQUOS NET+, you must  rst enter the Settings menu
of the portal and press the YELLOW button on the remote control.
In the next screen, please select YES with cursor and then press OK
on the remote control to con rm the reset of the settings.
NOTE: To meet our customers’ demands, we are improving our
products. As a result of our ongoing e orts new applications will
be added continuously to the AQUOS NET+. Applications and
content in AQUOS NET+ can be changed without notice. Some of
the functions and content may not be available in your country.
7 Day TV Guide
TV Guide is available in Digital TV mode. It provides information about
forthcoming programmes (where supported by the Digital channel). You
can view the start and end time of all programmes and on all channels for
the next 7 days and set reminders.
1. Press
[TV GUIDE]. The following 7 Day TV Guide will appear.
2. Navigate through the menu using
▲/▼/◄/►.
You can now:
Record selected TV channel and TV show by pressing the RED button.*
Set areminder by pressing GREEN.
View aprevious day by pressing YELLOW.
EN
View the next day by pressing BLUE. [INFO] shows detailed
information about the selected post
3. Press
[EXIT] to exit the 7 day TV Guide.
* - only for models with recording function
USB Record - Digital mode*
Built into this television is aUSB record facility. This function is available in
Digital mode when used in conjunction with acompatible USB memory
stick or USB Hard drive. The bene ts of this are as follows:
Pause live TV and then playback, fast forward and rewind (up to live TV).
One button record, if you decide you want to record the current
programme.
Easy programmable recording from the 7 day TV Guide
Due to the nature of the product, it is necessary to use ahigh speed USB
memory stick (as the TV reads from and writes to the memory stick at the
same time, some memory sticks may not be suitable).
Minimum Speci cation - USB Memory Stick
Read Speed - 20 MB/s(Mega Byte Per Second)
Write Speed - 6 MB/s(Mega Byte Per Second)
Pause Live TV (Time Shift)*
Pausing Live TV is very simple.
Press the play/pause button and the television will pause and the live
content will be recorded. To resume watching press play/pause again.
Press fast forward to go forward in arecording (i.e. to skip adverts).
Press fast rewind to go back in arecording
(i.e. if you fast forwarded too far).
TIP: When you switch the TV to standby or change channel the Time Shift
memory is wiped. To restart time shift you must press play/pause button.
One Button Record
At any point in time you may decide to record the current channel that you
are watching. To do this you need to press the [REC] button.
TIP: This television contains one TV tuner, therefore it can
only record the channel you are watching or record one
channel while the television is in standby mode.
NOTE: USB record function is only available in Digital TV mode.
Due to copyright laws and illegal copying/recording it is not
possible to record to/from any other input/output source.
* - only for devices with built in PVR function
MHL
MHL Port (HDMI 3) - MHL is a wired solution that allows you to
access the media from your phone or tablet onto the big screen in
the highest quality. By connecting an MHL cable (sold separately)
from your mobile device and into your TV you can playback all
your videos, games and photographs directly onto your TV. MHL
simply mirrors the screen of your mobile device so will work with all
applications, whilst connected it will also charge your device too.
11
SHARP
LC-32CFE6452E LC-40CFE6452E LC-43CFE6452E LC-49CFE6452E LC-55CFE6452E
A+ A+ A+ A+ A+
32" / 81cm 40" / 100cm 43" / 109cm 49" / 123cm 55" / 139cm
31,0 W 45,0 W 41,0 W 67,0 W 85,0 W
45 kWh 66 kWh 60 kWh 98 kWh 124 kWh
<0,50 W <0,50 W <0,50 W <0,50 W <0,50 W
1920 (H) x 1080 (V) 1920 (H) x 1080 (V) 1920 (H) x 1080 (V) 1920 (H) x 1080 (V) 1920 (H) x 1080 (V)
Product  che
Trademark
Model
Energy e ciency class
Visible screen size (diagonal)
On-mode power consumption
Annual energy consumption *
Standby power consumption **
O mode power consumption
Screen resolution
* - Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual
energy consumption will depend on how the television is used.
** - when the TV is turned o with the remote control and no function is active
N/A
Media File Ext.
Codec
Remark
Video Audio
Movie
.mpg MPEG-1, MPEG-2
MP3, WMA, AAC,
AC3, H-AC3, DTS
Max Resolution: 1920x1080
Max Data rate: 40 Mbps
.avi
Xvid, MJPEG, MPEG-4
SP/ASP, H.264
Max Resolution: 1920x1080
Max Data rate: 20 Mbps
.ts MPEG-2, H.264
".mov/
.mkv"
MPEG-4 SP/ASP, H.264
.dat MPEG-1
.mp4
MPEG-4 SP/ASP, H.264
MPEG-1, MPEG-2
Max Resolution: 720x576 Max
Data rate: 40 Mbps
.vob MPEG-2
Music
.mp3 - MP3
Sample Rate 8K-48KHz Bit rate: 32K -
320Kbps Channel: Mono/Stereo
.wma - WMA
".m4a/
.aac"
-AAC
Sample Rate 16K-48KHz Bit rate: 32K
~ 442Kbps Channel: Mono/Stereo
Photo
".jpg/
.jpeg"
Progressive JPEG Max Resolution: 1024x768
Baseline JPEG Max Resolution: 8192x8192
.bmp BMP
Max Resolution: 6500x6500 Pixel
Depth 1/4/8/16/24/32 bpp
.png
Non-Interlaced Max Resolution: 3000x3000
Interlaced Max Resolution: 1500x1500
Compatible  les in USB Mode
DE
Wichtige Sicherheitsanweisungen
VORSICHT
GEFAHR AUF STROMSCHLAG
NICHT ÖFFNEN
Bitte lesen Sie sich diese Sicherheitsanweisungen
durch und beachten Sie, bevor Sie das Gerät in
Betrieb nehmen, auf die folgenden Warnhinweise:
Halten Sie Kerzen und o enes
Feuer von diesem Produkt fern,
um einen Brand zu vermeiden.
Fernsehgeräte mit einem Gewicht von mehr als 20 Kg müssen von mind-
estens zwei Personen angehoben und getragen werden.
Dieses Fernsehgerät enthält keine Teile, die vom Benutzer repariert
werden könnten. Setzen Sie sich im Fall eines Defekts mit dem Hersteller
oder dem autorisierten Kundendienst in Verbindung. Das Berühren
bestimmter Teile im Fernsehgerät könnte Ihr Leben gefährden. Die
Garantie gilt nicht für Defekte, die durch von nicht autorisierte Dritten
durchgeführte Reparaturen entstehen.
Entfernen Sie nicht die rückseitige Abdeckung des Geräts.
Diese Gerät wurde für den Empfang und die Wiedergabe von Bild- und
Tonsignalen konstruiert. Eine andere Verwendung ist strengstens
verboten.
Setzen Sie das Fernsehgerät keinen tropfenden oder spritzenden Flüs-
sigkeiten aus.
Das TV Gerät abstecken bedeutet: den Stecker aus der Steckdose ziehen.
Wenn das Stromversorgungskabel beschädigt ist, muss es vom
Hersteller, einem Servicetechniker oder ähnlich quali zierten Person
ausgetauscht werden, um Gefährdungen zu vermeiden.
Die ideale Entfernung zum Fernsehen ist ungefähr die fün ache Länger
der Bildschirmdiagonale. Re ektionen von anderen Lichtquellen auf
dem Bildschirm können die Bildqualität verschlechtern.
Sorgen Sie dafür, dass das Fernsehgerät ausreichend belüftet wird und
sich nicht zu nahe an anderen Geräten oder Möbelstücken be ndet.
Stellen Sie das Produkt mindesten 5 cm von der Wand zur Belüftung auf.
Sorgen Sie dafür, dass die Belüftungsö nungen nicht durch Gegen-
stände, z. B. Zeitungen, Tischdecken, Gardinen usw. verdeckt sind.
Das Fernsehgerät ist für die Verwendung in einem moderaten Klima
konstruiert.
Das Fernsehgerät ist ausschließlich für den Betrieb an einem trockenen
Ort konstruiert. Wenn Sie das Fernsehgerät im Freien benutzen, sorgen
Sie dafür, dass es vor Feuchtigkeit (Regen, Spritzwasser) gesichert ist.
Niemals der Feuchtigkeit aussetzen.
Stellen Sie keine mit Wasser gefüllte Behälter, wie Vasen usw. auf das
Fernsehgerät. Diese Behälter könnten umgestoßen werden und die elek-
trische Sicherheit gefährden. Stellen Sie das Fernsehgerät nur auf  achen
und stabilen Ober ächen. Legen Sie keine Objekte wie Zeitungen oder
Decken usw. auf oder unter das Fernsehgerät.
Sorgen Sie dafür, dass das Gerät nicht auf Stromkabeln steht, da diese hi-
erdurch beschädigt werden könnten. Mobiltelefone und andere Geräte,
wie WLAN-Adapter, Überwachungskameras mit drahtloser Signalüber-
tragung usw. könnten elektromagnetische Störungen verursachen und
sollten daher nicht in der Nähe des Geräts aufgestellt werden.
Stellen Sie das Gerät nicht neben Heizkörpern oder an einem Ort mit
direkter Sonneneinstrahlung auf, da dies negative Auswirkung auf
die Kühlung des Gerätes haben kann. Ein HItzestau ist gefährlich und
die Lebensdauer des Geräts erheblich verkürzen. Um für Sicherheit zu
sorgen, bitten Sie eine quali zierte Person, den Staub aus dem Gerät zu
entfernen.
Vermeiden Sie die Beschädigung an Stromkabeln oder Stromsteckern.
Das Gerät darf nur mit dem mitgelieferten Stromkabel/Stecker ange-
schlossen werden.
Gewitter sind für alle elektrischen Geräte gefährlich. Wenn das
Strom- oder Antennenkabel vom Blitz getro en wird, kann das Gerät,
auch wenn es ausgeschaltet ist, beschädigt werden. Bei einem heran
nahenden Gewitter sollten Sie alle Kabel und Stecker des Gerätes aus-
stecken.
Verwenden Sie zur Reinigung des Bildschirms des Geräts nur ein
feuchtes und weiches Tuch. Verwenden Sie nur sauberes Wasser, niemals
Reinigungsmittel und in keinem Fall Lösungsmittel.
Stellen Sie das Fernsehgerät nah an die Wand, damit die Möglichkeit
vermieden wird, dass es beim Drücken der Knöpfe umfällt.
WARNUNG – Stellen Sie den Fernseher niemals an eine unsichere Stelle.
Das Gerät könnte fallen und ernsthafte Verletzungen bis hin zum Tod
verursachen. Viele Verletzungen, speziell bei Kindern, können durch
folgende Vorsichtsmaßnahmen verhindert werden:
Benutzen Sie ausschließlich Standfüße und Halterungen, die vom
Hersteller für das Gerät empfohlen werden
Benutzen Sie nur Möbel, die den TV sicher tragen können
Versichern Sie sich, dass das Gerät nicht übersteht
Stellen Sie Ihr Gerät nicht auf hohe Möbel (z.B. Schränke oder Bücher-
regale), ohne das Gerät und die Möbel entsprechend zu sichern
Stellen Sie das Gerät nicht auf Kleidung oder andere Materialen (Tisch-
decken etc.), die auf den Möbeln liegen.
Erklären Sie Kindern die Gefahren, die bestehen, wenn sie auf Möbel
klettern, um an den TV oder die Fernbedienung zu gelangen.
Stellen Sie sicher, das Kindern nicht auf den TV klettern.
Wenn Sie ihr bereits vorhandenes Gerät woanders aufstellen möchten,
gelten dieselben Vorsichtsmaßnahmen wie oben.
Stellen Sie keine anderen Objekte bzw. mit Flüssigkeiten gefüllte Vasen
oder Gläser auf den TV.
Die unten genannten Anleitungen sind ein sicherer Weg, das Fernse-
hgerät aufzustellen, indem man es an der Wand befestigt, was die
Möglichkeit, dass es nach vorne Fällt und Verletzungen und Schäden
verhindert.
Diese Methode ist auch nützlich, wenn das Gerät auf einer Glasober-
äche aufgestellt wird und Sie nicht möchten, dass etwas in Ihre Möbel
geschraubt wird.
Für diese Art der Befestigung benötigen Sie eine Befestigungskordel.
A)Wenn Sie eines/beide der oberen Wandmontagelöcher und die
Schrauben verwenden (die Schrauben be nden sich schon in den
Wandmontagelöchern), dann befestigen Sie das eine Ende der
Befestigungskordel(n) am Fernsehgerät.
B)Sichern Sie das andere Ende der Befestigungskordel(n) an Ihrer Wand.
Die Software Ihres Fernsehgeräts und das OSD-Layout können ohne
Vorankündigung geändert werden.
Warnung:
Verbinden Sie niemals externe Geräte mit mit einem laufenden Fernse-
happarat. Schalten Sie nicht nur das Fernsehgerät sondern auch die zu
verbindenden Geräte aus. Stecken Sie den Fernsehgerätestecker erst
in die Wandsteckdose, wenn Sie die externen Geräte und die Antenne
verbunden haben.
Sie müssen immer dafür Sorge tragen, dass der Fernsehgerätestrom-
stecker frei zugänglich ist.
Das Gerät ist nicht dafür gebaut, um an einem mit Monitoren ausges-
tatteten Arbeitsplatz verwendet werden zu können.
Die ständige Verwendung von Kopfhörer mit hoher Lautstärke kann zu
dauernden Hörschäden führen.
Sorgen Sie für eine umweltverträgliche Entsorgung dieses Geräts und
Komponenten, die Batterien enthalten. Wenn Sie Zweifel haben, setzen
Sie sich mit Ihrer zuständigen Behörde in Verbindung, um Einzelheiten
zum Recycling zu erfahren.
Vergessen Sie bei der Aufstellung nicht, dass Möbelober ächen mit ver-
schiedenen Lacken, Kunststo en usw. behandelt wurden oder dass sie
poliert sein können. Die in diesen Produkten enthaltenen Chemikalien
könnten mit dem Ständer des Fernsehgeräts reagieren. Dies könnte dazu
13
führen, das Stücke des Materials auf der Ober äche kleben, die nur sehr
schwer oder gar nicht zu entfernen sind.
Der Bildschirm Ihres Fernsehgeräts wurde unter besten Qualitätsbedin-
gungen hergestellt und wurde mehrmals auf beschädigte Pixel geprüft.
Wegen der technischen Eigenschaften des Herstellungsprozess ist es
nicht möglich, das Auftreten einer geringe Anzahl von schadhaften
Punkten auf dem Bildschirm zu vermeiden (dies auch bei höchster Sorg-
falt während der Herstellung). Diese schadhaften Pixel gelten nicht als
Schaden im Rahmen der Garantiebedingungen, wenn ihr Vorkommen
nicht höher als in den Grenzwerten, die in der DIN-Norm vorgegeben
sind, ist.
Der Hersteller kann nicht für für servicebezogene Kundenprobleme
in Bezug auf Inhalte oder Dienstleistungen Dritter haftbar gemacht
werden. Alle Fragen, Kommentare oder servicebezogene Anfragen zu
dem Inhalt oder dem Service Dritter müssen unmittelbar an den für den
Inhalt oder Service zuständigen Dienstleister gerichtet werden.
Es gibt eine Reihe von Gründen, warum Sie mit dem Gerät nicht auf
Inhalte oder Services zugreifen können, wie z. B. insbesondere Stromaus-
fall, der Internetverbindung oder Fehler bei der richtigen Kon guration
Ihres Geräts. Universal Media Corporation, sein Vorstand, die leitenden
Angestellten, die Mitarbeiter, Vertreter, Auftragnehmer und Partner sind
Ihnen und Dritten gegenüber nicht für Fehler oder Versorgungsunter-
brechungen ungeachtet der Ursache oder ob sie hätten vermieden
werden können, haftbar.
Jeder Inhalt oder Service von Drittanbietern wird Ihnen über diese Gerät
auf einer „wie vorhanden“ und „wie geliefert“ Basis zur Verfügung gestellt
und die Universal Media Corporation und seine Partner rmen geben
Ihnen gegenüber keine ausdrückliche oder vermeintliche Garantie
oder Zusage, einschließlich, aber nicht erschöpfend keine Garantien für
die wirtschaftliche Verwertbarkeit, nicht Verletzung, oder Eignung für
einen bestimmten Zweck oder Garantien für die Eignung, Verfügbarkeit,
Genauigkeit, Vollständigkeit, Sicherheit, Anspruch, Verwendbarkeit,
Fehlen von Fahrlässigkeit oder fehlerfreien, ununterbrochenen Betrieb
oder Verwendung des Inhalts oder der Ihnen angebotenen Services
oder das der Inhalt oder die Services ihren Wünschen und Erwartungen
entsprechen.
Die 'Universal Media Corporation' ist kein Vertreter und übernimmt
keine Verantwortung für die Handlungen und Unterlassung von Inhalt-
oder Service-Drittanbietern noch Aspekten des Inhalts oder Service im
Hinblick auf solche Drittanbieter.
Auf keinem Fall ist die 'Universal Media Corporation' und/oder seine
Partner Ihnen oder Dritten gegenüber für unmittelbare, mittelbare,
besondere, zufällige, strafrechtlich, nachfolgende oder weitere Schäden
haftbar, gleichgültig ob sich der Schadenersatzanspruch aus dem
Vertrag, unerlaubter Handlung, Fahrlässigkeit, Garantieverletzung,
verschuldensunabhängige Haftung oder sonstigen Gründen ergibt
und ob die Universal Media Corporation und/oder ihre Partner auf die
Möglichkeit solcher Ansprüche hingewiesen wurden.
Wichtige Informationen zur Verwendung von
Videospielen, Computern, Untertiteln und sonstigen
Standbildanzeigen.
Die übermäßige Verwendung von feststehenden Bildern kann ein ein
permanentes „Schattenbild“ (das manchmal fälschlicher Weise als „in den
Bildschirm eingebrannt“ bezeichnet wird) verursachen. Dieses Schat-
tenbild ist im Hintergrund auf dem Bildschirm ständig sichtbar. Dies ist
ein nicht mehr behebbarer Schaden. Sie können einen solchen Schaden
vermeiden, in dem Sie die nachfolgenden Anleitungen befolgen:
Reduzieren Sie die Helligkeit-/Kontrasteinstellung auf ein Minimum.
Lassen Sie keine Standbilder für einen längeren Zeitraum anzeigen.
Vermeiden Sie die Anzeige von:
» Teletext Zeit und Gra ken,
» TV/DVD Menü, z. B. DVD Inhaltsverzeichnis.
» Den „Pause“ Modus (festhalten): Wenn Sie sich eine DVD oder ein
Video ansehen, sollten Sie diesen Modus nicht für längere Zeit
verwenden.
» Schalten Sie das Gerät, wenn Sie es nicht verwenden, aus.
Batterien
Beachten Sie beim Einlegen der Batterien auf die
richtige Polarität.
Setzen Sie Batterien keinen hohen Temperaturen
aus und legen Sie sie nicht an Stellen ab, wo sich
die Temperatur schnell erhöht, z. B. neben ein Feuer
oder in die direkte Sonneneinstrahlung.
Setzten Sie Batterien keiner übermäßigen Strahl-
ungswärme aus, werfen Sie sie nicht ins Feuer oder
bauen sie auseinander und versuchen Sie nicht,
nicht au adbare Batterien aufzuladen. Sie könnten undicht werden oder
explodieren.
» Verwenden Sie niemals unterschiedliche Batterien oder vermischen
neue mit alten.
» Entsorgen Sie die Batterien umweltfreundlich.
» In den meisten EU-Ländern gelten für die Entsorgung von Batterien
besondere Gesetze und Vorschriften.
Entsorgung
Entsorgen Sie Ihr Fernsehgerät niemals über den nor-
malen Hausmüll. Geben Sie es bei dem für das Recycling
von WEEE vorgesehenen Sammelpunkt ab. Damit helfen
Sie, Ressourcen einzusparen und die Umwelt zu schützen.
Weitere Informationen erhalten Sie von Ihrem Händler
oder den örtlichen Behörden.
CE-Konformitätserklärung
Die Universal Media Corporation s.r.o erklärt hiermit, dass dieses LED
Fernsehgerät die wesentlichen Anforderungen und weitere entsprech-
ende Vorschriften der R&TTE Verordnung 1999/5/EG einhält. http://www.
sharp.eu/av/documents-of-conformity
Markenzeichen
Die Begri e HDMI und HDMI High-De nition Multimedia Interface
sowie das HDMI Logo sind Warenzeichen oder in den Vereinigten
Staaten und weiteren Ländern eingetragene Warenzeichen der HDMI
Licensing, LLC.
Das „HD TV“ Logo ist eine Markenzeichen von DIGITALEUROPE:
Das „HD TV 1080p“ Logo ist eine Markenzeichen von DIGITALEUROPE:
Das DVB Logo ist ein eingetragenes Markenzeichen des Digital Video
Broadcasting -DVB- Projekts.
In Lizenz von Dolby Laboratories gefertigt. Dolby, Dolby Audio und
das Doppel-D-Symbol sind Warenzeichen von Dolby Laboratories.
Für die DTS-Patente gehen sie bitte auf: http://patents.dts.com. In
Lizenz für DTS Licensing Limited hergestellt. DTS, the Symbol, & DTS
und the Symbol zusammen sind eingetragene Warenzeichen, DTS
TruSurround und DTS 2.0+Digital Out sind Marken von DTS, Inc. ©
DTS, Inc. Alle Rechte vorbehalten.
YouTube und das YouTube Logo sind Markenzeichen der Google Inc.
Das WI-FI CERTIFIED Logo ist ein Prüfzeichen der Wi-Fi Alliance.
Das WI-FI CERTIFIED Logo ist ein Prüfzeichen der Wi-Fi Alliance.
DLNA , das DLNA Logo und DLNA CERTIFIED sind Warenzeichen,
Dienstleistungszeichen oder Prüfzeichen der Digital Living Network
Alliance
MHL und das MHL Logo sind Warenzeichen, eingetragene Warenzei-
chen oder Schutzmarken von MHL, LLC in den USA und/oder anderen
Staaten.
Die Bluetooth® Wortmarke und Logos sind geschützte Marken der
Bluetooth SIG Inc.
Cd
FR
Importantes consignes de sécurité
ATTENTION
RISQUE D’ÉLECTROCUTION
NE PAS OUVRIR
Svp, lire ces consignes de sécurité et respecter les
avertissements suivants avant que l'appareil ne soit
actionné:
A n d’éviter un incendie,
maintenir toujours les bougies
et autres  ammes nues
éloignées de ce produit.
La TV d'un poids de plus de 20 kg doit être soulevée et portée par au
moins deux personnes.
Cette TV ne contient aucune pièce qui pourrait être réparée par
l'utilisateur. En cas de défaut, contacter le fabricant ou l'agent autorisé
qui assure le service après-vente. Le contact avec certaines parties situ-
ées à l'intérieur de la TV pourrait mettre votre vie en danger. La garantie
ne couvre pas les défauts provoqués par des réparations e ectuées par
des tiers non autorisés.
Ne pas enlever la partie arrière de l'appareil.
Cet appareil est conçu pour la réception et la reproduction des signaux
vidéos et sonores. Toute autre utilisation est interdite.
Ne pas exposer la TV aux égouttures ou éclaboussures de liquides.
Pour déconnecter la télévision de l’alimentation électrique, veuillez
débrancher la  che de la prise d’alimentation.
Si le cordon d'alimentation est endommagé, il doit être remplacé par le
fabricant, un agent du service après-vente ou des personnes de quali -
cations similaires a n d'éviter un risque.
La distance idéale pour regarder une TV est approximativement équiva-
lente à cinq fois la diagonale de l'écran. Les ré exions d'autres sources
lumineuses sur l'écran peuvent altérer la qualité de l'image.
S'assurer que la TV dispose d'une ventilation su sante et qu'elle n'est
pas à proximité d'autres appareils et d'autres meubles.
Pour la ventilation, installer le produit à 5 cm du mur au minimum.
S'assurer que les ouvertures de ventilation sont dégagées des articles
tels que des journaux, des nappes de table, des rideaux, etc…
La TV est conçue pour être employée sous un climat modéré.
La TV est conçue exclusivement pour une utilisation dans un endroit
sec. Quand on utilise la TV à l'extérieur, s'assurer qu'elle est protégée
contre l'humidité (pluie, éclaboussures d'eau). Ne jamais exposer la TV
à l'humidité.
Ne placez pas d’objets, de récipients remplis de liquide, comme des
vases, etc..., sur la télévision. Ces récipients pourraient être renversés, ce
qui mettrait en danger la sécurité électrique. Placer la TV exclusivement
sur des surfaces plates et stables. Ne placer aucun objet tel qu'un journal
ou une couverture, etc. sur ou sous la TV.
S'assurer que l'appareil n'est posé sur aucun câble électrique qui pourrait
ainsi être endommagé. Les téléphones mobiles et autres dispositifs
tels que les adaptateurs WLAN (Réseau local sans  l), les caméras de
surveillance avec transmission sans  l du signal, etc. peuvent causer de
l'interférence électromagnétique et ne devraient pas être placés près
de l'appareil.
Ne pas placer l'appareil près d'éléments chau ants ou dans un endroit
exposé à la lumière directe du soleil cela ayant un e et négatif sur le
refroidissement de l'appareil. La chaleur accumulée est dangereuse et
peut sérieusement réduire la vie de l'appareil. A n d'assurer la sécurité,
demander à une personne quali ée d'enlever la poussière de l'appareil.
Essayer d'empêcher l'endommagement des câbles ou adaptateurs du
secteur. L'appareil ne peut être connecté qu'aux câbles ou adaptateurs
du secteur.
Les orages sont dangereux pour tous les appareils électriques. Si le
secteur ou le câblage aérien est frappé par la foudre, l'appareil peut être
endommagé, même s'il était éteint. Il faudrait débrancher tous les câbles
et connecteurs de l'appareil avant un orage.
Pour nettoyer l'écran de l'appareil, utiliser seulement un tissu humide et
doux. Employer seulement de l'eau propre, jamais de détergents et en
aucun cas des dissolvants.
Placer la TV près du mur pour éviter la possibilité de la faire tomber en
la poussant.
AVERTISSEMENT - Ne placez jamais une télévision dans un emplace-
ment instable. Une télévision peut tomber, causant de graves blessures
corporelles, voire la mort. De nombreuses blessures, particulièrement
chez les enfants, peuvent être évitées en prenant de simple précautions
telles que:
Utiliser des meubles de télévision recommandés par le fabricant.
N’utiliser que des meubles pouvant supporter la télévision de manière
sûre.
S’assurer que la télévision ne dépasse pas du bord du meuble la sup-
portant.
Ne pas placer la télévision sur un haut meuble (par exemple, armoire ou
étagères) sans ancrer le meuble et la télévision à un support adapté.
Ne pas placer la télévision sur un tissu ou autre matériau pouvant être
entre la télévision et le meuble de support.
Éduquer les enfants sur les dangers de grimper sur les meubles pour
atteindre la télévision ou ses commandes.
S’assurer que les enfants ne puissent pas grimper ou attraper la télévi-
sion.
Si votre télévision existante est conservée et changée d’emplacement,
les considérations ci-dessus s’appliquent aussi.
Les instructions exposées ci-dessous sont une manière plus sûre
d'installer la TV par  xation murale, supprimant ainsi la possibilité qu'elle
tombe vers l'avant et provoque des blessures et des dégâts.
Cette méthode est également utile si la TV est à placer sur une surface de
verre ou si l'on ne souhaite pas visser quoi que ce soit dans les meubles.
Pour ce type d'installation une corde d'attache est nécessaire
A) En utilisant un ou deux trous pour la  xation murale et les vis (les vis
sont déjà fournies dans les trous pour la  xation murale), attacher une
extrémité de la corde d'attache à la TV.
B) Fixer l'autre extrémité de la corde d'attache au mur.
Le logiciel sur votre TV et la disposition du menu à l'écran (OSD) peuvent
être changés sans communication préalable.
Avertissement:
Ne jamais relier un dispositif externe à un appareil sous tension. Éteindre
non seulement la TV mais également les dispositifs qui lui sont reliés! Re-
lier la  che de la TV à la prise murale après avoir relié tous les dispositifs
externes et l'antenne!
Assurer toujours le libre accès à la  che secteur de la TV.
L'appareil n'est pas conçu pour un usage dans un lieu de travail équipé
de moniteurs.
L'utilisation systématique des écouteurs à un niveau de volume élevé
peut conduire à des dommages irréversibles de l'audition.
Assurer l'élimination de cet appareil et de tous les composants y compris
les batteries, en conformité avec les normes environnementales. Dans le
doute, entrer en contact avec l'autorité locale pour les détails concernant
le recyclage.
Tout en installant l'appareil, se souvenir que les surfaces des meubles
sont traitées avec divers vernis, plastiques, etc. ou qu'elles peuvent être
cirées. Les produits chimiques contenus dans ces produits peuvent
avoir une réaction avec le support de la TV. Ceci pourrait faire que des
morceaux de matériaux collent à la surface des meubles, qu'il sera dif-
cile d'enlever, voire impossible.
L'écran de la TV aété fabriqué selon des conditions de qualité supérieure
et aété examiné en détail plusieurs fois, pour déceler les pixels défec-
tueux. En raison des propriétés technologiques du processus de fabrica-
IT
Cosa è compreso nella confezione
L'acquisto di questo televisore comprende le
seguenti componenti:
• 1x TV • 1x cavo RF
1x telecomando 1x pacchetto di installazione
supporto TV
2x batterie AAA 1x manuale di istruzioni
1x Cavo adattatore mini-
composit
1x Cavo adattatore mini-
componente
Attaccare il supporto
Seguite le istruzioni all'ultima pagina di questo manuale di istruzioni.
Guida introduttiva - impostazione iniziale
1. Inserite le batterie fornite nel telecomando.
2. Usate il cavo RF fornito, collegate il televisore alla presa a muro
dell'antenna TV.
3. Per la connessione via cavo a internet usare un cavo Cat 5/Ethernet
(non incluso) dal proprio televisore al router/modem a banda larga.
4. Collegare il cavo di alimentazione alla presa elettrica e accendere la TV
usando il pulsante di standby sulla TV.
5. Sarai accolto dalla schermata della Prima installazione. Se non viene
visualizzata, premi il pulsante di stand-by sul televisore, questo
farà visualizzare "menu accoppiamento". Scorrere ed evidenziare
"Accoppia nuovamente" premendo il pulsante CH+/CH- del televisore
(funzione di scorrimento verso l'alto/il basso nel menu) quindi
premere il pulsante di stand-by del televisore (funzione OK nel menu)
per confermare la selezione. Premere e tenere premuti i pulsanti
giallo e verde per alcuni secondi sul telecomando,  no a che
il LED bianco sulla TV non lampeggerà cinque volte. Premere
[MENU] quindi 8-8-8-8, verrà quindi visualizzata la schermata Prima
installazione.
Se volete e ettuare modi che alle impostazioni di default, usate i
tasti ▲/▼/◄/► di scorrimento. Per uscire dal menù in qualunque
momento, premete il taso [EXIT].
6. Con gurate le impostazioni desiderate sulla schermata di PRIMA
INSTALLAZIONE.
Antenna DVB - Selezionate il tipo di trasmissione digitale. Potete
scegliere tra terrestre (DVB-T), via cavo (DVB-C) o satellitare (DVB-S)*.
Lingua - Con gurate la lingua del menù principale del televisore.
Paese - Impostate il paese desiderato.
Sintonizzare- Scegliete se volete sintonizzarvi solo in digitale (DTV),
analogico (ATV) o entrambe digitale e analogico (DTV + ATV)
Operatore - Selezionate il fornitore del servizio via cavo. Se il
vostro operatore via cavo non compare nell'elenco, selezionate
Altri. (Disponibile solo se l'antenna DVB è impostata su CAVO)
Ambiente - Selezionate la collocazione del televisore. Per l'utilizzo
domestico, selezionate la modalità Modalità Home. Per la modalità
dimostrazione in negozio, impostate la Modalità Store.
LCN - Impostate LCN su ON se volete ordinare i canali secondo le
preferenze del provider (applicabile solo su canali DVB-T e DVB-C).
7. Premete il tasto [Sintonizzazione automatica] per iniziare il processo
di sintonizzazione.
8. Preimpostazioni DVB-C di canale opzionale:
Mantenete le impostazioni di default come consigliato.
Se non vengono trovati i canali DVB-C, contattate il vostro fornitore di
rete per richedere un "ID di rete" valido. Poi e ettuate una nuova ricerca.
Premete [MENU], selezionate "ID di rete" ed entrate nell'ID di rete.
9. Preimpostazioni DVB-S2 di canale opzionale:
Selezionate "Satellite" nel "Antenna DVB" nel menù per le
preimpostazioni di canale opzionale. Qui potete scegliere tra diversi
satelliti. Quando la selezione è completa, la lista dei canali del satellite
esatto sarà disponibile per essere importata nel sistema del vostro
televisore.
Confermate con il tasto [OK] sul telecomando per iniziare la
scansione.
SUGGERIMENTO: Se vi mancano alcuni canali, si potrebbe
trattare di scarsa potenza del segnale: dovreste nel caso pensare di
collegare un ripetitore di segnale e di risintonizzare il televisore.
Telecomando
Telecomando radiocomandato - Non c'è più bisogno di puntare
in direzione del televisore! Fate riferimento all'immagine del
telecomando alla seconda pagina di questo manuale di istruzioni.
1.
STANDBY – Accende il televisore quando è in standby o viceversa.
2.
MUTE – Silenzia il suono o viceversa.
3. 0 9 – per selezionare direttamente i canali TV.
4. TV GUIDE – Apre la guida TV 7 giorni (Modalità digitale).
5.
Per tornare al canale precedentemente in visione.
6. PICTURE Scorre nelle opzioni di modalità dell'immagine.
7. VOL ▲/▼ Per alzare/abbassare il livello del suono.
8. CH ▲/▼ Per guardare il canale successivo o precedente.
9. SOUND Scorre nelle opzioni di modalità del suono.
10. SOURCE Appare il menù ingresso/sorgente.
11. MENU Per mostrare il menù OSD.
12. EXIT Per uscire da qualunque menù.
13. (▲/▼/◄/►/ OK) – Vi permette di navigare su menù su schermo e
regolare le impostazioni di sistema a piacere.
14. BACK Torna al menu precedente.
15. FAV Per mostrare il menù preferiti.
16. INFO Premete una volta per informazioni sul canale attuale o succes-
sivo. Premete due volte per informazioni sul programma in onda.
17. TEXT Modalità televideo - Per entrare nel televideo
18. SUBTITLE Per far apparire i sottotitoli nella parte inveriore dello
schermo (on/o ).
19. DTV Passa alla sorgente TV digitale.
20. YouTube Visualizza le applicazioni YouTube.
21. MEDIA Passa alla sorgente USB.
22. NET+ Visualizza il menu AQUOS NET+.
23. Rec
1
Registrazione PVR
24.
Per far ripartire il capitolo corrente
25.
Per avanzare al capitolo successivo
26.
Per interrompere la riproduzione
27. Rec List
1
Apre la lista delle registrazioni.
28.
Per la riproduzione in modalità di riavvolgimento rapido.
29.
Per la riproduzione in modalità di avanzamento rapido.
30.
Per riprodurre/mettere in pausa
31. TASTI COLORATI – Televideo supplementare e funzioni OSD
1 - disponibile solo con funzione PVR
31
*
Tasti TV
Vol+ Alza il volume e menù destra
Vol- Abbassa il volume e menù sinistra
CH+ Programma/Canale successivo e menù su
CH- Programma/Canale precedente e menù gi
MENU Appare il Menù/OSD
SOURCE Appare il menù della sorgente di entrata
STANDBY Standby accensione/spegnimento
Scelta della modalità di ingresso/sorgentes
Per cambiare tra i diversi ingressi/le diverse connessioni.
a. Uso dei tasti sul telecomando:
1. Premete [SOURCE/ AV] - Apparirà il menù sorgente. Premtete [] o
[] per selezionare l'ingresso che desiderate.
2. Premete [OK].
b. Uso dei tasti sul televisore:
1. Premete [SOURCE].
2. Scorrete su / giù usando i tasti CH+/ CH- per l'ingresso/sorgente che
desiderate.
3. Premete Vol+ per cambiare ingresso/sorgente e arrivare a quello
selezionato.
Collegamenti
Veri cate la tabella per i tipi di connettori per i
diversi modelli disponibili a pagina 12
USB
Ingresso USB 1, 2
HDMI 1, 2, 3(MHL) in
Ingresso HDMI 1, 2, 3 in
VGA (PC)
VGA(ingresso PC)
VGA (PC) Audio In
Ingresso aiudio PC 3.5mm
Mini AV
Ingresso video & ingresso audio componente / video
audio input
Mini YPbPr
Ingresso mini componente HD
SCART
Ingresso SCART
CI Card IN
Ingresso CI
RF In
Ingresso RF / antenna TV
Sat In
Ingresso satellite
Uscita audio digitale ottica
Uscita digitale ottica
RJ 45
Ethernet
CUFFIE
Uscita cu e 3.5mm
Navigazione menù TV
Per accedere a questo menù, premete il tasto [MENU] sul telecomando.
Per entrare in un menù premete [OK]. Se volete e ettuare modi che
alle impostazioni di default, usate i tasti ▲/▼/◄/► di scorrimento. Per
confermare le impostazioni premete il tasto [OK]. Per uscire dal menù in
qualunque momento, premete il taso [EXIT].
Immagine
Modalità immagine - Scegliete tra le seguenti preimpostazioni.
Standard - Impostazioni di default
Dinamico - Impostazioni consigliate per immagini in movimento rapido
Mite - Per colori più leggeri e meno brillanti
Personale - Vi permette di modi cvare
manualmente tutte le impostazioni
Eco - Consuma il 15% in meno di energia.
Contrasto - Commuta il bilanciamento tra bianco e nero.
Luminosità - Aumenta o diminuisce la luminosità dell'immagine.
Tono - Vi permette di aumentare o diminuire il livello di
tonalità all'interno dell'immagine (solo per segnale NTSC)
Colore - Aumenta il colore dal bianco e nero.
Nitidezza - Aumenta o diminuisce la nitidezza dell'immagine.
Regolazione retroilluminazione - regola la luminosità dello schermo
aumentando/diminuendo la retroilluminazione del pannello.
Temperatura colore - Scegliete tra le seguenti preimpostazioni.
Normale - Impostazioni di default
Caldo - Aumenta il rosso all'interno dell'immagine
Freddo - Aumenta il blu all'interno dell'immagine
Rosso - regola la tonalità di rosso dell'immagine
Verde - regola la tonalità di verde dell'immagine
Blu - regola la tonalità di blu dell'immagine
Gamma - regola le tonalità tra le parti chiare e scure dell'immagine.
Rapporto di aspetto - Il formato dell'immagine varia a seconda
del canale e della trasmissione. Ci sono molte diverse opzioni
per venire incontro alle vostre necessità al meglio.
Auto-Visualizza automaticamente il migliore formato
dell'immagine. Così l'immagine è nella posizione corretta.
Potrebbero esserci delle linee nere in alto o in basso e/o ai lati.
4:3 - Visualizza l'immagine in 4:3 nel suo formato originale. Le
strisce laterali appaiono per completare lo schermo in 16:9.
16:9 - Riempie lo schermo con un segnale 16:9 regolare.
Zoom 1/2 - L'immagine ha la giusta proporzione,
ma è ingrandita per riempire lo schermo.
Punto per punto (HDMI) - Mostra l'immagine nella
risoluzione originale senza alcuna modi ca
Schermo intero - Allunga il segnale per riempire lo schermo.
Riduzione del disturbo - Filtra e riduce il
rumore (interferenza) dell'immagine
Riduzione del disturbo MPEG - Consente di ridurre le
interferenze causate dalla compressione MPEG.
Contrasto attivo - Ottimizza automaticamente la 'retroilluminazione' e
il 'contrasto' dell'immagine sulla base della luminosità dello schermo.
Audio
Modalità audio - Scegliete tra le seguenti preimpostazioni
Standard - Impostazioni di default
Musica - Enfatizza la musica al di sopra delle voci
Film - Dà un audio live e ricco ai  lm
Personale - Seleziona le vostre impostazioni audio personali
Sport - Enfatizza l'audio per lo sport
SUGGERIMENTO: I livelli di treble e bassi possono essere regolati
68.
35
SHARP
LC-32CFE6452E LC-40CFE6452E LC-43CFE6452E LC-49CFE6452E LC-55CFE6452E
A+ A+ A+ A+ A+
32" / 81cm 40" / 100cm 43" / 109cm 49" / 123cm 55" / 139cm
31,0 W 45,0 W 41,0 W 67,0 W 85,0 W
45 kWh 66 kWh 60 kWh 98 kWh 124 kWh
<0,50 W <0,50 W <0,50 W <0,50 W <0,50 W
1920 (H) x 1080 (V) 1920 (H) x 1080 (V) 1920 (H) x 1080 (V) 1920 (H) x 1080 (V) 1920 (H) x 1080 (V)
Scheda del prodotto
Marchio commerciale
Modello
Classe di e cienza energetica
Dimensione dello schermo (diagonale)
Consumo di corrente modalità ON
Consumo energetico annuo*
Consumo energetico in standby**
Consumo energetico se spento
Risoluzione dello schermo
* - Consumo energetico di XYZ kWh all'anno, basato sul consumo energetico del televisore in funzione per 4 ore al giorno per 365 giorni. L'e ettivo
consumo energetico dipende da come viene utilizzato il televisore.
** - quando il televisore viene spento con il telecomando e non ci sono funzioni attive
N/A
Mezzo Estensione del  le
Codec
Osservazioni
Video Audio
Film
.mpg MPEG-1, MPEG-2
MP3, WMA, AAC,
AC3, H-AC3, DTS
Risoluzione massima: 1920x1080
Velocità di trasferimento dati massima: 40 Mbps
.avi
Xvid, MJPEG, MPEG-4
SP/ASP, H.264
Risoluzione massima: 1920x1080
Velocità di trasferimento dati massima: 20 Mbps
.ts MPEG-2, H.264
".mov/
.mkv"
MPEG-4 SP/ASP, H.264
.dat MPEG-1
.mp4
MPEG-4 SP/ASP, H.264
MPEG-1, MPEG-2
Risoluzione massima: 720x576
Velocità di trasferimento dati massima: 40
.vob MPEG-2
Musica
.mp3 - MP3
Frequenza di campionamento 8K-48KHz bit
rate: Canale 32K - 320Kbps: Mono/Stereo
.wma - WMA
".m4a/
.aac"
-AAC
Frequenza di campionamento
16K-48KHz bit rate: 32K
Canale ~ 442Kbps: Mono/Stereo
Foto
".jpg/
.jpeg"
JPEG progressivo Risoluzione massima: 1024x768
JPEG base Risoluzione massima: 8192x8192
.bmp BPM
Risoluzione massima: 6500x6500 pixel
profondità 1/4/8/16/24/32 bpp
.png
Non interlacciati Risoluzione massima: 3000x3000
Interlacciati Risoluzione massima: 1500x1500
File compatibili in modalità USB
39
*
Botones de la televisión
Vol+ permite subir el volumen y seleccionar derecha en el menú
Vol- permite subir el volumen y seleccionar izquierda en el
menú
CH+ permite subir programas o canales y seleccionar arriba en
el menú
CH- permite subir programas o canales y seleccionar abajo en
el menú
MENU permite mostrar el menú o el menú en pantalla
SOURCE permite mostrar el menú de entrada y salida.
STANDBY permite activar y desactivar el modo en espera
Selección del modo de entrada/fuente
Permite cambiar entre las diferentes entradas o conexiones.
a. Uso de los botones del mando a distancia:
4. Pulse [SOURCE/ AV] para que aparezca el menú de fuente. Pulse []
o [] para seleccionar la entrada deseada.
5. Pulse [OK].
b. Uso de los botones de la televisión:
1. Pulse [SOURCE].
2. Desplácese hacia arriba o hacia abajo con los botones CH+/ CH-
hasta la entrada o fuente deseada.
3. Pulse Vol+ para cambiar la entrada o fuente a la seleccionada.
Conexiones
Consulte la tabla de tipos de conectores para los
diferentes modelos disponibles en la página XX.
USB
Entrada USB 1, 2
HDMI 1, 2, 3(MHL) in
Entrada HDMI 1, 2, 3
VGA (PC)
Entrada VGA de PC
VGA (PC) Audio In
Entrada de audio de PC de 3,5 mm
Mini AV
Entrada de vídeo y entrada de audio/vídeo por
componentes
Mini YPbPr
Entrada HD de minicomponente
SCART
Entrada de Euroconector
CI Card IN
Entrada de CI
RF In
Entrada RF/antena de televisión
Sat In
Entrada de satélite
Digital Optical Audio Out
Salida óptica digital
RJ 45
Ethernet
HEADPHONES
Salida de auriculares de 3,5 mm
Navegación por el menú de la televisión
Para acceder a este menú, pulse el botón [MENU] del mando a distancia.
Para entrar en un menú, pulse [OK]. Si desea modi car alguno de
los ajustes predeterminados, utilice los botones de desplazamiento
(▲/▼/◄/►). Para con rmar un ajuste, pulse el botón [OK]. Para salir de
este menú en cualquier momento, pulse el botón [EXIT].
Imagen
Modo de imagen - puede escoger entre los siguientes preajustes.
Estándar - ajustes predeterminados
Dinámico - ajustes recomendados para
imágenes en movimiento rápido
Suave - ajuste para colores menos intensos y brillantes
Personal - permite modi car manualmente todos los ajustes
Ecohome - consume un 15 % menos de energía.
Contraste - alterna el equilibrio entre blancos y negros.
Brillo - aumenta o reduce el brillo de las imágenes.
Matiz - permite aumentar o reducir el nivel de
matiz de la imagen (solo para señal NTSC)
Color - permite aumentar el color de negro a blanco.
Nitidez - permite aumentar o reducir la de nición de las imágenes.
Ajuste de la retroiluminación - permite ajustar el brillo de la
pantalla aumentando o reduciendo la retroiluminación del panel.
Temperatura de color - permite escoger los siguientes preajustes.
Normal - ajuste predeterminado
Cálida - permite aumentar el color rojo de las imágenes
Fría - permite aumentar el color azul de las imágenes
Rojo - permite ajustar el tono rojo de la imagen.
Verde - permite ajustar el tono verde de la imagen.
Azul - permite ajustar el tono azul de la imagen.
Gamma - permite ajustar los tonos entre las
partes brillantes y oscuras de la imagen.
Relación de aspecto - el formato de la imagen varía en
función del canal o la emisión. Existen varias opciones
diferentes para responder a sus necesidades.
Auto - permite mostrar automáticamente el mejor formato de
imagen. De forma que la imagen se encuentre en la posición
correcta. Puede tener líneas negras en la parte superior e inferior.
4 -3 - permite mostrar las imágenes 4 -3 en su tamaño original.
Se muestran barras laterales para rellenar la pantalla 16 -9.
16 -9 - permite rellenar la pantalla con una señal 16 -9 estándar.
Zoom 1/2 - La imagen tiene la proporción correcta
pero ampliada para rellenar la pantalla.
Punto a punto (HDMI) - permite mostrar la imagen
en su resolución original sin ningún cambio.
Pantalla completa - permite estirar la señal para rellenar la pantalla.
Reducción del ruido -  ltra y reduce el ruido
(las interferencias) de la imagen.
Reducción del ruido MPEG - le permite reducir las
interferencias visibles causadas por la compresión MPEG.
Contraste activo - optimiza automáticamente la “retroiluminación y
el contraste” de la imagen de acuerdo con el brillo de la pantalla.
Sonido
Modo de sonido - permite seleccionar entre los siguientes preajustes
Estándar - ajustes predeterminados
68.
ES
Música - realza la música sobre las voces
Película - proporciona sonido en directo y envolvente para las películas.
Personal - permite seleccionar los ajustes de sonido personales.
Deportes - realza el sonido para eventos deportivos.
CONSEJO: Los niveles de graves y agudos solo pueden
ajustarse en el modo de sonido Personal.
Ecualizador - ajusta el volumen de las distintas frecuencias de
sonido. Los niveles de sonido del ecualizador solo se pueden ajustar
cuando se ha seleccionado el modo de sonido “Personal”.
Balance - permite ajustar el sonido entre el altavoz izquierdo y el derecho.
Volumen automático - mantiene el volumen a un nivel
constante con independencia de la entrada o fuente.
DTS TruSurround - permite activar o desactivar
el efecto de sonido envolvente.
Salida digital - esta es la salida de audio digital.
Escoja una de las siguientes opciones
Desactivado - desactivado.
Auto - permite seleccionar los mejores ajustes automáticamente.
PCM - seleccione esta opción si conecta la televisión a un
sistema de estéreo de alta  delidad a través de un cable
digital (la modulación por impulsos codi cados [PCM] es
una representación digital de una señal analógica).
Audiodescripción - pista sonora adicional para personas con de ciencias
visuales. Disponible solo para programas de televisión digital concretos.
Volumen AD - permite ajustar el volumen de
la pista sonora de audiodescripción.
Retardo de audio (ms) - permite ajustar el sonido para sincronizar
las imágenes y el audio en los altavoces de la televisión.
Retardo SPDIF (ms) - permite ajustar el sonido para
sincronizar las imágenes y el audio de los altavoces
conectados a través de una salida de audio digital.
PC
Ajuste automático - permite con gurar automáticamente
la televisión para usarla como monitor de ordenador.
Posición H - permite cambiar la posición horizontal de la imagen.
Posición V - permite cambiar la posición vertical de la imagen.
Tamaño - aumenta el tamaño de la imagen.
Fase - permite ajustar el tiempo de retraso de
fase para reducir el ruido de la imagen.
CONSEJO: Si el ordenador se deja inactivo durante un periodo de
tiempo, la televisión pasará a estado de suspensión (se apagará para
ahorrar energía). Para encender de nuevo pulse el botón en espera.
CONSEJO: Si no pulsa un botón durante los diez segundos siguientes,
el menú se cerrará automáticamente. Puede modi car
la cantidad de tiempo que tarda el menú en cerrarse automáticamente.
Consulte la sección Tiempo de OSD.
Canal
Antena DVB - permite establecer el tipo de señal de televisión digital.
Terrestre - terrestre (DVB-T).
Cable - cable (DVB-C).
Sintonización automática - permite volver a sintonizar todos los canales
digitales y analógicos, así como todas emisoras de radio de la televisión.
Sintonización manual analógica - permite
ajustar manualmente la señal analógica.
Sintonización manual digital - permite sintonizar
manualmente la señal digital.
Editar programa - permite eliminar, saltar y agregar canales favoritos.
Inform. de señal - ofrece información sobre la señal DVB.
Información CI - los servicios de pago por visión requieren insertar una
tarjeta inteligente en la televisión. Si suscribe un servicio de pago por
visión, el proveedor le proporcionará un módulo de acceso condicional
y una tarjeta inteligente. El módulo de acceso condicional se puede
insertar en el puerto de interfaz común (entrada de tarjeta CI).
Registro de programas grabados - lista de
programas de televisión grabados.
Lista de programación - lista de los recordatorios de programas.
Con guración de antena parabólica - este menú solo
está disponible en modo DVB-S2. Puede seleccionar el tipo
de satélite, el transpondedor, el tipo de LNB, etc.
Bloquear
Bloquear sistema - permite bloquear y desbloquear el menú. Se le
pedirá que introduzca una contraseña de 4 dígitos. Utilice el botón
para saltar la introducción de contraseña. Utilice el botón para borrar.
La contraseña predeterminada es 0000.
Intr. Contraseña - permite cambiar la contraseña predeterminada.
Bloquear programa - bloquea canales especí cos de televisión.
Control paterno - bloquea canales de televisión
en función del límite de edad.
Bloqueo de teclas - bloquea los botones de la televisión.
Desactivado - se desbloquean todos los botones de la televisión.
Parcial - solo se bloquea el botón en espera.
Total - se bloquean todos los botones de la televisión.
Hora
Reloj - permite establecer la fecha y la hora. La fecha y la
hora se establecen automáticamente en el modo DVB.
Hora de apagado - permite establecer una hora
especí ca para apagar la televisión.
Hora de encendido - permite establecer una hora especí ca
para encender la televisión, el canal que se mostrará, la
fuente y el volumen. Esta función puede con gurarse para
que se repita todos los días o un determinado día.
Temporizador - permite establecer el temporizador para que
la televisión se apague automáticamente en un periodo de
tiempo establecido. Apagado -> 10 min -> 20 min -> 30 min
-> 60 min -> 90 min -> 120 min -> 180 min -> 240 min.
Tiempo de OSD - permite ajustar la cantidad de tiempo que
permanece el menú en pantalla antes de desaparecer.
Apagado autom. - permite ajustar el modo en espera automático
en incrementos de horas - Apagado -> 3 h -> 4 h -> 5 h.
Huso horario - permite cambiar la zona horaria actual.
Red
Con guración de red - primero tendrá que seleccionar su tipo de
conexión. Puede elegir entre una conexión Wi-Fi o una conexión con cable.
NOTA: Para conectarse a Internet con una conexión por
cable, debe conectar un cable Cat 5/Ethernet (no incluido)
del televisor a su módem o router de banda ancha.
Con guración IP - ajustes de conexión de red LAN.
– Automático - conectará automáticamente el televisor a su red doméstica
(este es el ajuste predeterminado y se recomienda encarecidamente).
– Manual - le permite cambiar manualmente la
información de IP, Netmask, Gateway y DNS.
Con guración Wi–Fi - ajustes de conexión a la red inalámbrica.
Búsqueda automática de Wi–Fi - busca automáticamente
las redes inalámbricas disponibles. Seleccione la red Wi-Fi
que desee y, a continuación, introduzca la contraseña de
red (si la red estuviera protegida con una contraseña). Una
PT
Login - Cria uma conta ou login para uma conta
existente, para personalizar o seu AQUOS NET+.
De nições - Filtra as aplicações com base nas línguas selecionadas.
REPOR AS DEFINIÇÕES DO UTILIZADOR: Se desejar repor completamente
todas as de nições do utilizador no AQUOS NET+, primeiro tem de entrar
no menu das De nições do portal e carregar no botão AMARELO do
telecomando. No ecrã seguinte, selecione SIM com o cursor e carregue
em OK no telecomando, para con rmar a reposição das de nições.
NOTA: Para ir de encontro às exigências dos consumidores, estamos a
melhorar os nossos produtos. Como resultado dos nossos esforços, serão
continuamente adicionadas novas aplicações ao AQUOS NET+. As aplicações
e o conteúdo do AQUOS NET+ podem ser alterados sem aviso prévio. Algumas
das funções e conteúdos podem não se encontrar disponíveis no seu país.
Guida de TV de 7 dias
O Guia de TV encontra-se disponível no modo de TV Digital. Fornece
informação sobre os programas que irão dar (onde suportado pelo canal
Digital). Pode ver a hora de início de  m de todos os programas e de todos
os canais nos próximos 7 dias e de nir lembretes.
1. Carregue em [GUIA DE TV]. O Guia de TV de 7 dias seguinte aparecerá.
2. Navegue no menu usando ▲/▼/◄/►.
Agora pode:
Gravar canais e programas de televisão selecionados carregando no
botão VERMELHO.*
De na um lembrete carregando no VERDE.
Veja um dia anterior carregando no AMARELO.
Veja o dia seguinte carregando no AZUL.
[INFO] apresenta informação detalhada sobre o post selecionado
3. Carregue em [SAIR] para sair do Guia de TV de 7 dias.
* - apenas em modelos com função de gravação
Gravação USB - Modo Digital*
Dentro deste televisor existe uma unidade de gravação de USB. Esta função
encontra-se disponível no Modo Digital quando usada em conjunto com
um dispositivo de memória USB ou um disco rígido USB. Os benefícios
disto são os seguintes:
Pausa televisão em direto e depois volta a reproduzir, avança rapidamen-
te ou retrocede (até ao direto).
Gravação de um botão, se decidir que quer gravar o programa atual.
Programação da gravação fácil a partir do Guia de TV de 7 dias.
Devido à natureza do produto, é necessário usar um dispositivo de
memória USB de grande velocidade (como o televisor lê e grava no
dispositivo de memória em simultâneo, alguns dispositivos podem não
ser adequados).
Especi cação mínima - Dispositivo de Memória USB
Velocidade de Leitura - 20 MB/s (Mega Byte Por Segundo)
Velocidade de Gravação - 6 MB/s (Mega Byte Por Segundo)
Pausar televisão ao vivo (Time Shift)*
É muito fácil fazer uma pausa na televisão em direto.
Carregue no botão reproduzir/pausar e a televisão fará uma pausa. O
conteúdo do direto será gravado. Para retomar, carregue novamente no
botão reproduzir/pausar.
Carregue no avançar rápido para avançar na gravação (por ex., para
saltar os anúncios).
Carregue no retroceder rápido para voltar atrás na gravação (por ex., se
avançou demais).
DICA: Quando colocar o televisor em stand-by, ou alterar o
canal, a memória do Time Shift é apagada. Para reiniciar o
time shift, terá de carregar no botão reproduzir/pausar.
Gravação de um botão
Em qualquer altura pode decidir gravar o canal atual que está a ver. Para o
fazer, precisa de carregar no botão [REC].
DICA: Este televisor contém um sintonizador de televisão,
pelo que só pode gravar o canal que estiver a ver, ou gravar
um canal enquanto o televisor está em modo stand-by.
NOTA: A função de gravação de USB encontra-se disponível apenas no modo
de televisão digital. Devido a leis de copyright e a cópias/gravações ilegais,
não é possível gravar para/de qualquer outra fonte de entrada/saída.
* - apenas para dispositivos com função de PVR incorporada
MHL
Entrada MHL (HDMI 3) - MHL é uma solução com  os que lhe
permite aceder a conteúdos de média do seu telefone ou tablet
no ecrã grande com a mais elevada qualidade Ao ligar um cabo
MHL (vendido separadamente) do seu dispositivo móvel ao seu
televisor, pode reproduzir todos os seus  lmes, jogos e fotogra as
diretamente no televisor. O MHL limita-se a espelhar o ecrã do seu
dispositivo móvel, em que todas as aplicações funcionam, sendo
que enquanto estiver ligado irá também carregar o dispositivo.
51
SHARP
LC-32CFE6452E LC-40CFE6452E LC-43CFE6452E LC-49CFE6452E LC-55CFE6452E
A+ A+ A+ A+ A+
32" / 81cm 40" / 100cm 43" / 109cm 49" / 123cm 55" / 139cm
31,0 W 45,0 W 41,0 W 67,0 W 85,0 W
45 kWh 66 kWh 60 kWh 98 kWh 124 kWh
<0,50 W <0,50 W <0,50 W <0,50 W <0,50 W
1920 (H) x 1080 (V) 1920 (H) x 1080 (V) 1920 (H) x 1080 (V) 1920 (H) x 1080 (V) 1920 (H) x 1080 (V)
Ficha do produto
Marca
Modelo
Classe de E ciência Energética
Tamanho visível do ecrã (diagonal)
Modo ligado consumo de energia
Consumo energético anual*
Consumo energético em stand-by**
Consumo energético em modo desligado
Resolução do ecrã
* - Consumo energético de XYZ kWh por ano, baseado no consumo energético do televisor em funcionamento 4 horas por dia durante 365 dias. O
consumo energético atual dependerá do modo como o televisor for usado.
** - quando o televisor é desligado com o telecomando e nenhuma função se encontra ativa
N/A
Media Ext. do Ficheiro
Codec
Anotação
Vídeo Audio
Filme
.mpg MPEG-1, MPEG-2
MP3, WMA, AAC,
AC3, H-AC3, DTS
Resolução Máx: 1920x1080 Taxa
de Dados Máx: 40 Mbps
.avi
Xvid, MJPEG, MPEG-4
SP/ASP, H.264
Resolução Máx: 1920x1080 Taxa
de Dados Máx: 20 Mbps
.ts MPEG-2, H.264
".mov/
.mkv"
MPEG-4 SP/ASP, H.264
.dat MPEG-1
.mp4
MPEG-4 SP/ASP, H.264
MPEG-1, MPEG-2
Resolução Máx: 720x576 Taxa
de Dados Máx: 40 Mbps
.vob MPEG-2
Música
.mp3 - MP3
Taxa de Amostra 8K-48KHz Taxa de Bits:
32K - 320Kbps Canal: Mono/Stereo
.wma - WMA
".m4a/
.aac"
-AAC
Taxa de Amostra 16K-48KHz Taxa de Bits: 32K
~ 442Kbps Canal: Mono/Stereo
Foto
".jpg/
.jpeg"
JPEG Progressivo Resolução Máx: 1024x768
Linha de base JPEG Resolução Máx: 8192x8192
.bmp BMP
Resolução Máx: 6500x6500 Profundidade
dos Pixels 04-01-2008/16/24/32 bpp
.png
Não-Entrelaçado Resolução Máx: 3000x3000
Entrelaçado Resolução Máx: 1500x1500
Ficheiros compatíveis no Modo USB
NL
Belangrijke veiligheidsinstructies
GEVAAR
KANS OP ELECTRISCHE SCHOKKEN
NIET OPENEN
Lees deze veiligheidsinstructies en let op de
volgende waarschuwingen voordat het apparaat in
gebruik wordt genomen:
Om vuur te voorkomen houdt
altijd kaarsen en ander open
vuur verwijderd van dit product.
TVsmet een gewicht van meer dan 20 kg moeten door tenminste twee
mensen worden getild.
Deze TV bevat geen onderdelen welke door de gebruiker kunnen
worden gerepareerd. In het geval van falen, neem contact op met
de fabrikant of een geautoriseerde onderhoudsdealer. Contact met
bepaalde delen in de TV kunnen uw leven in gevaar brengen. Onder de
garantie vallen geen fouten door reparaties uitgevoerd door ongeautori-
seerde derden.
Verwijder niet de achterkant van het apparaat.
Dit apparaat is ontworpen voor het ontvangen en vermeerderen van
beeld- en geluidssignalen. Elk ander gebruik is streng verboden.
Stel de TV niet bloot aan lekkende of spetterende vloeisto en.
Om de TV los te koppelen van de netspanning trekt u de stekker uit het
stopcontact.
Indien het voedingssnoer beschadigd is, moet deze worden vervangen
door de fabrikant, een onderhoudsdealer of gelijkwaardig gekwali -
ceerde personen om gevaar te voorkomen.
De ideale afstand om TV te kijken is ongeveer vijf keer de diagonale af-
stand van het scherm. Re ecties op het scherm van andere lichtbronnen
kunnen de kwaliteit van het beeld verergeren.
Zorg ervoor dan de TV voldoende ventilatie heeft en niet vlak naast
andere apparaten en meubelstukken staat.
Installeer het product tenminste 5 cm vanaf de muur voor ventilatie.
Zorg ervoor dat de ventilatie-openingen vrij zijn van artikelen zoals
kranten, tafelkleden, gordijnen, etc.
De TV-set is ontworpen voor gebruik in mild klimaat.
De TV-set is alleen ontworpen voor gebruik op een droge plaats. Bij ge-
bruik van de TV buiten, zorg ervoor dat deze beschermd is tegen vocht
(regen, spetterend water). Nooit aan vocht blootstellen.
Plaats geen voorwerpen, bakken met vloeisto en zoals vazen, etc. op de
TV. Deze houders kunnen omver gegooid worden, welke de elektrische
veiligheid in gevaar brengt. Plaats de TV alleen op vlakke en stabiele
ondergronden. Plaats geen artikelen zoals kranten of dekens, etc. op of
onder de TV.
Zorg ervoor dat het apparaat niet op voedingskabels staat omdat deze
beschadigd kunnen raken. Mobiele telefoons an andere apparaten zoals
WLAN-adapters, beveiligingscamerasmet draadloze verbinding, etc.
kunnen elektromagnetisch storen en moeten niet in de buurt van het
apparaat worden opgesteld.
Plaats het apparaat niet naast hitte elementen of op een plaats in direct
zonlicht omdat deze een negatief e ect hebben op de koeling van het
apparaat. Hitte opslag is gevaarlijk en kan de levensverwachting van het
apparaat ernstig verminderen. Om de veiligheid te garanderen, vraag
een gekwali ceerd persoon de stof te verwijderen van het apparaat.
Probeer schade aan het voedingssnoer en adapter te vermijden.
Het apparaat kan alleen met het geleverde voedingssnoer worden
aangesloten.
Storm is gevaarlijk voor alle elektrische apparaten. Indien de voeding of
antenne door bliksem wordt geraakt kan het apparaat beschadigd raken,
zelfs wanneer deze is uitgeschakeld. Umoet alle kabels en aansluitingen
verwijderen van het apparaat voor een storm.
Om het scherm van het apparaat schoon te maken, gebruik een zachte
vochtige doek. Gebruik alleen schoon water, geen schoonmaakmiddelen
en nooit oplosmiddelen.
Plaats de TV vlak naast de muur om de mogelijkheid van vallen door
omver stoten te voorkomen.
WAARSCHUWING - Plaats nooit een televisie op een onstabiele locatie.
Een televisietoestel kan vallen en ernstig persoonlijk letsel of de dood
veroorzaken. Veel verwondingen, met name die bij kinderen, kunnen
worden voorkomen door het nemen van eenvoudige voorzorgs-
maatregelen zoals:
Gebruik kasten of standaards, die zijn aanbevolen door de fabrikant van
uw televisie.
Gebruik alleen meubels, die de televisie veilig kunnen ondersteunen.
Zorg ervoor dat de televisie niet over de rand hangt van het onder-
steunende meubilair.
Plaats de televisie niet op een hoog meubelstuk (bijvoorbeeld servies- of
boekenkasten) zonder dat u het meubelstuk en de televisie op de juiste
manier heeft verankerd.
Plaats de televisie niet op een kleed of ander materiaal op het onder-
steunende meubelstuk.
Leer kinderen dat het gevaarlijk is om op meubels te klimmen om de
televisie of de afstandsbediening te bereiken.
Zorg ervoor dat kinderen niet op de TV klimmen of hangen.
Als u uw bestaande televisie wilt bewaren en verplaatsen gelden dez-
elfde waarschuwingen als hierboven staat aangegeven.
De instructies hieronder omschrijven een veiligere manier om de TV op
te stellen door deze aan de wand te bevestigen en vermijd de mogelijk-
heid dat deze valt met letsel en schade als gevolg.
Deze methode is ook nuttig wanneer de TV op een glazen ondergrond is
geplaatst of wanneer uniet in uw meubels wilt schroeven.
Voor dit type installatie bent ueen bevestigingskoord nodig.
A) Gebruik makend van een of beide van de bovenste montage gaten en
schroeven (de schroeven zijn al geleverd in de montage gaten) bevestig
een uiteinde van het bevestigingskoord aan de TV.
B) Bevestig het andere uiteinde van het bevestigingskoord aan uw muur.
De software op uw TV en de menuscherm-layout kunnen zonder
aankondiging worden veranderd.
Waarschuwing:
Sluit nooit een extern apparaat aan op een apparaat dat aan staat.
Schakel niet alleen de TV uit maar ook het te verbinden apparaat! Sluit
de TV aan op de wandcontactdoos na aansluiting van externe apparaten
en de antenne!
Zorg er voor dat er altijd vrije toegang is tot de stekker van de TV.
Het apparaat is niet ontworpen voor gebruik op een werkvloer voorzien
van monitoren.
Het systematisch gebruik van koptelefoons op hoog niveau kan leiden
tot permanente gehoorschade.
Zorg voor een milieuvriendelijke verwijdering van dit apparaat en elk
van de componenten inclusief batterijen. Bij twijfel, neem contact op
met uw plaatselijke autoriteiten voor details over recycling.
Tijdens installatie van het apparaat, vergeet niet dat oppervlakken van
meubels behandeld zijn met verschillende beitsen, plastics, etc. of dat
deze gepolijst zijn. De chemicaliën in deze producten kunnen reageren
met de voet van de TV. Dit kan tot gevolg hebben dat stukjes van het
materiaal kleven aan het oppervlak van het meubel, welke moeilijk te
verwijderen zijn, zo niet onmogelijk.
Het scherm van uw TV is geproduceerd onder omstandigheden van de
hoogste kwaliteit en is meerdere keren gecontroleerd op defecte pixels.
Door technologische kenmerken van het fabricageproces, is het niet
mogelijk het bestaan van een klein aantal defecte punten op het scherm
te voorkomen (zelfs bij maximale zorg tijdens productie). Deze defecte
pixels worden niet als fouten gezien in termen van garantie condities,
indien hun aantal niet groter is dan de grenzen zoals omschreven door
de DIN-norm.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-55CFE6452E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-55CFE6452E in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info