526529
43
Zoom out
Zoom in
Previous page
1/52
Next page
41
Troubleshooting
Problem Possible solution
No power.
Turn on (;) the MAIN POWER switch on the left side of the TV (Page 4).
Check if you pressed B on the remote control unit. If the indicator on the TV lights up red, press
B.
Is the AC cord disconnected?
Check if you pressed a on the TV.
The TV cannot be operated. External influences such as lightning, static electricity, etc., may cause improper operation. In this
case, operate the TV after first turning off the power, or unplugging the AC cord and re-plugging it in
after one or two minutes.
Remote control unit does not operate.
Are batteries inserted with polarity (e, f) aligned?
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminating to the remote control sensor?
Picture is cut off. Is the image position correct?
Are screen mode adjustments (WIDE MODE) such as picture size made correctly? (Pages 31 and 37)
Strange colour, light colour, or dark
colour, or colour misalignment.
Adjust the picture tone.
Is the room too bright? The picture may look dark in a room that is too bright.
Check the “Colour system” setting (Pages 29 and 34).
Power is suddenly turned off. The TV’s internal temperature has increased. Remove any objects blocking the vent or clean.
Is the “Sleep timer” set? Select “Off” from the “Sleep timer” menu (Page 26).
Is “No signal off” or “No operation off” activated? (Page 26)
No picture.
Are connections to external equipment correct? (Pages 16_18)
Is the input signal type selected correctly after connection? (Page 34)
Is the correct input source selected? (Page 12)
Is a non-compatible signal being input? (Page 38)
Is the picture adjustment correct? (Pages 23_24)
Is the antenna connected properly? (Page 8)
Is “On” selected in “Audio only”? (Page 25)
No sound. Is the volume too low?
Make sure that headphones are not connected.
Check if you pressed e on the remote control unit.
Is the proper item selected in the “PC audio select” menu when connecting devices to the HDMI 2
terminal or the EXT 4 terminal? (Pages 16 and 25)
The TV sometimes makes a cracking
sound.
This is not a malfunction. This happens when the cabinet slightly expands and contracts according to
changes in temperature. This does not affect the TV’s performance.
Cautions regarding use in high and low temperature environments
When the TV is used in a low temperature space (e.g., room, office), the picture may leave trails or appear slightly delayed. This is not
a malfunction, and the TV will recover when the temperature returns to normal.
Do not leave the TV in a hot or cold location. Also, do not leave the TV in a location exposed to direct sunlight or near a heater, as this
may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: e 5 °C to e 35 °C.
CLEARING THE PIN
Go to “MENU” > “Setup”.
Press a/b to select “Auto installation”, “Programme setup”, “Child lock” or “Reset”, and then press
;. The PIN input window will display.
Press and hold both :r and i+ on the TV simultaneously until the message appears on the
screen.
1
2
3
Appendix
LC-LE705E_GB.indd 41LC-LE705E_GB.indd 41 2009/10/09 14:13:242009/10/09 14:13:24
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-52LE700S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-52LE700S in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-52LE700S

Sharp LC-52LE700S User Manual - German - 52 pages

Sharp LC-52LE700S User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info