453023

Sharp LC-46LU705S Manual

31
Zoom out
Zoom in
Previous page
1/52
Next page
29
Analogue setting
You can reconfigure the analogue TV channels settings
automatically or manually.
Additional search
Use this menu to add new services automatically after
“Analogue search” in the “Auto installation” menu has
been completed.
Start searching channels after selecting the colour system and
sound system.
Manual adjust
Use this menu to set up analogue TV channels manually.
After selecting “Yes” on the screen, press
a/b/c/d to select the channel you want to
set and then press ;.
Fine
You can adjust the frequency to the desired position.
NOTE
Adjust while checking the background picture as a reference.
Instead of pressing c/d to adjust the frequency, you can set
by directly entering the frequency number of the channel with
0_9 numeric buttons.
EXAMPLE
179.25 MHz: Press 1 > 7 > 9 > 2 > 5.
49.25 MHz: Press 4 > 9 > 2 > 5 > ;.
Colour sys.
Select the optimum colour system to receive (“Auto”,
“PAL”, “SECAM”).
Sound sys.
Select the optimum sound systems (broadcasting
systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).
Label
When a TV channel sends its network name, the “Auto
installation” detects the information and assigns a
name to it. However, you can change channel names
individually.
Press a/b/c/d to select each character of
the new name for the channel, and then press
;.
Repeat step 1 above until the name is fully
spelt out.
NOTE
The name can be five characters or less.
If a channel name is less than five characters, select “END” to
set the channel name.
E
•
E
•
•
•
•
1
2
•
•
Skip
Channels with “Skip” set to “On” are passed over when
using :r/s even if selected while watching the image
from the TV.
Decoder
When connecting a decoder to the TV, you need to select
“EXT 1” or “EXT 2”.
NOTE
The factory preset value is “Off”.
Lock
You can block the viewing of any channel.
NOTE
See “Child lock” for setting a PIN.
When “Lock” is set to “On” for a channel, “Child lock has been
activated” displays, and the image and sound of the channel
are blocked.
When pressing 6 while “Child lock has been activated”
displays, the PIN input window will display. Inputting the correct
PIN unlocks the “Child lock” temporarily until the power is
turned off.
Sort
Channel positions can be sorted freely.
Press c/d to select “Yes”, and then press
;.
Press a/b/c/d to select the channel you
want to move, and then press ;.
Press a/b/c/d to move it to the desired
position, and then press ;.
Repeat steps 2 and 3 until all desired channels
are sorted.
Erase programme
Channels can be erased individually.
Press c/d to select “Yes”, and then press
;.
Press a/b/c/d to select the channel you
want to erase, and then press ;.
A message window pops up.
Press c/d to select “Yes”, and then press
; to erase the selected channel. All the
subsequent channels move up.
Repeat steps 2 and 3 until all desired channels
are erased.
•
•
•
•
E
1
2
3
4
E
1
2
•
3
4
Basic adjustment
LC-LE705E_GB.indd 29LC-LE705E_GB.indd 29 2009/10/09 14:13:122009/10/09 14:13:12
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-46LU705S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-46LU705S in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-46LU705S

Sharp LC-46LU705S User Manual - German - 52 pages

Sharp LC-46LU705S User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info