453063
71
Zoom out
Zoom in
Previous page
1/84
Next page
69
Troubleshooting
Problem Possible solution
• No power.
Turn on (;) the MAIN POWER switch on the rear of the TV (Page 5).
Is the AC cord disconnected?
Check if you pressed <a on the TV.
The TV cannot be operated. External influences such as lightning, static electricity, etc., may cause improper operation. In this
case, operate the TV after first turning off the power, or unplugging the AC cord and re-plugging it in
after one or two minutes.
Remote control unit does not operate.
Are batteries inserted with polarity (e, f) aligned?
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminating to the remote control sensor?
Picture is cut off. Is the image position correct?
Are screen mode adjustments (Wide mode) such as picture size made correctly? (Pages 42, 50 and 51)
Strange colour, light colour, or dark
colour, or colour misalignment.
Adjust the picture tone.
Is the room too bright? The picture may look dark in a room that is too bright.
Check the “Colour system” setting (Pages 37 and 46).
Power is suddenly turned off. The TV’s internal temperature has increased. Remove any objects blocking the vent or clean.
Is the “Sleep timer” set? Select “Off” from the “Sleep timer” menu (Page 34).
Is “No signal off” or “No operation off” activated? (Page 34)
• No picture.
Are connections to external equipment correct? (Pages 24_26)
Is the input signal type selected correctly after connection? (Page 45)
Is the correct input source selected? (Page 19)
Is a non-compatible signal being input? (Page 52)
Is the picture adjustment correct? (Pages 30_31)
Is the antenna connected properly? (Page 12)
Is “On” selected in “Audio only”? (Page 34)
No sound. Is the volume too low?
If you do not clearly hear the sound for the visually impaired, go to “Menu” > “Setup” > “Audio” >
“Audio description setting” > “Mix level”, and select the upper level to turn up the volume.
Make sure that headphones are not connected.
Check if you pressed e on the remote control unit.
Is the proper item selected in the “Audio select” menu when connecting devices to the HDMI 2
terminal or the EXT 3 terminal? (Pages 24, 25 and 33)
The TV sometimes makes a cracking
sound.
This is not a malfunction. This happens when the cabinet slightly expands and contracts according to
changes in temperature. This does not affect the TV’s performance.
CLEARING THE PIN
1 Go to “Menu” > “Setup”.
2 Press a/b to select “Auto installation”, “Programme setup”, “PIN”, “Parental rating” or “Reset”, and
then press ;. The PIN input window will display.
3 Press and hold both :r and i+ on the TV simultaneously until the message appears on the
screen.
NOTE
The PIN is also available for the Net TV function.
Reset
If complex adjustments are made so that the settings cannot be restored to normal, you can reset the settings to the
factory preset values.
1 Go to “Menu” > “Setup” > “View setting” > “Reset”.
2 Press c/d to select “Yes”, and then press ;.
“Now, TV will restart automatically, OK?” displays on the screen.
3 Press c/d to select “Yes”, and then press ;.
“Now initialising...” displays on the screen and blinks.
After the reset has completed, the power shuts off and then comes back on. The screen will have returned to its original settings.
NOTE
PIN input is required when executing “Reset”. The default PIN is “1234”. To change the PIN setting, refer to Password/Lock settings
(Page 38). To clear the PIN setting (PIN input will no longer be needed), refer to CLEARING THE PIN (Page 69).
“Reset” is greyed out in 3D mode. To select the “Reset” menu, you need to switch to 2D mode.
Appendix
LC-46LE925E_GB_ver4.indd 69LC-46LE925E_GB_ver4.indd 69 2010/08/07 10:59:172010/08/07 10:59:17
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-46LE925E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-46LE925E in the language / languages: English as an attachment in your email.

The manual is 4,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-46LE925E

Sharp LC-46LE925E Additional guide - English - 13 pages

Sharp LC-46LE925E User Manual - German - 84 pages

Sharp LC-46LE925E User Manual - Dutch - 84 pages

Sharp LC-46LE925E User Manual - French - 84 pages

Sharp LC-46LE925E User Manual - Italian - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info