453063
58
Zoom out
Zoom in
Previous page
1/84
Next page
56
Network setup
Wireless installation
Use the wireless LAN USB adapter supplied with the TV.
E Wireless connection overview
n PC
o Wireless LAN router/access point
p Wireless LAN USB adapter (supplied)
q Network
NOTE
When using the SHARP wireless LAN USB adapter (supplied),
try to provide as much free space around the device for best
performance.
Make sure the firewalls in your network allows access to the TV
wireless connection.
Operations cannot be guaranteed when used with access
points that do not have Wi-Fi® certification.
A wireless LAN access point is required to connect the TV to
the Internet using a wireless LAN. See the operation manual of
your access point for setup.
E How to connect
1 Switch on your router before starting the
network installation.
2 Connect the wireless LAN USB adapter
(supplied) to the USB port on the TV.
Do not use a wireless LAN adapter other than the
supplied SHARP wireless LAN adapter, as operations
cannot be guaranteed.
3 Go to “Menu” > “Setup” > “View setting” >
“Network setup” > “Country”.
4 Press a/b/c/d to select your country or
area, and then press ;.
5 Press a/b to select “Connection type” in the
“Network setup” menu.
6 Press c/d to select “Wireless”, and then
press ;.
7 Select “OK” to confirm.
8 Press a/b to select “Wireless setup” in the
“Network setup” menu.
9 Press c/d to select “Change”, and then
press ;.
0 Press a/b to select “WPS”, and then press
;.
If your router/access point does not support WPS (=
Wi-Fi Protected Setup), select “Search” and follow the
on-screen instructions and the operation manual of the
router/access point.
To establish the connection manually, select “Manual
setup” and follow the on-screen instructions and the
operation manual of the router/access point.
WPS
Search
Manual Setup
Q Press a/b to select “Push button”, and then
press ;.
To establish the connection manually, select “PIN code”.
Follow the on-screen instructions and the operation
manual of the router/access point.
Push button
PIN code
W Select “Next” to proceed.
E Press the WPS button on the router/access
point. When you press the WPS button, a
progress bar will appear on the display. Wait
until the connection is established.
R Select “OK” when the connection details are
displayed.
If you have failed to connect to the internet in the above
operation, an error massage will appear. In this case,
press ATV/DTV/SAT/b to return to the normal TV
screen and check the relevant settings.
NOTE
To connect your TV to the internet, you must have a broadband
internet connection.
If you do not have a broadband internet connection, consult the
store where you purchased your TV or ask your internet service
provider or telephone company.
There is no need to enter the security key for subsequent
connections to the wireless network.
If your access point is set to a stealth mode (that prevents
detection by other devices), you may not be able to establish
a connection. In this case, disable the stealth mode on the
access point.
To change a wireless LAN connection settings, go to “Menu” >
“Setup” > “View setting” > “Network setup” > “Wireless setup”.
See page 76 to check the supplied SHARP wireless LAN adapter
specifications.
LC-46LE925E_GB_ver4.indd 56LC-46LE925E_GB_ver4.indd 56 2010/08/07 10:59:042010/08/07 10:59:04
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-46LE925E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-46LE925E in the language / languages: English as an attachment in your email.

The manual is 4,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-46LE925E

Sharp LC-46LE925E Additional guide - English - 13 pages

Sharp LC-46LE925E User Manual - German - 84 pages

Sharp LC-46LE925E User Manual - Dutch - 84 pages

Sharp LC-46LE925E User Manual - French - 84 pages

Sharp LC-46LE925E User Manual - Italian - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info