453055
16
Zoom out
Zoom in
Previous page
1/85
Next page
14
Initial auto installation
When the TV is powered on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
Confirm the following before turning on
the power
E
Is the antenna cable connected?
E
Is the AC cord plugged in?
E
Is the MAIN POWER switch turned on (;)?
Important information:
Satellite services are only available for the 830 model
series.
1 Press <a on the TV.
The initial auto installation wizard appears.
2 Setting the OSD language.
Press a/b/c/d to select the desired language, and
then press ;.
3 Selecting the location of the TV.
HOME
STORE
Press c/d to select where you will use this TV, and
then press ;.
The confirmation screen pops up only when
selecting “STORE”. Press c/d to select “Yes” or
“No”.
HOME: “STANDARD” will be the default value for
the “AV mode” setting.
STORE: “DYNAMIC (Fixed)” will be the default
value for the “AV mode” setting. If the “AV mode”
is changed, the TV will automatically switch back
to “DYNAMIC (Fixed)” when there is no operation
using the TV or remote control unit for 30 minutes.
STORE: A demonstration image will be displayed
after initial auto installation is completed. If you
have chosen “STORE” by mistake, go to “Setup” >
“View setting” > “Reset” > select “HOME” again.
4 Setting the country.
Press a/b/c/d to select your country or area, and
then press ;.
This setting screen only appears during the initial
auto installation.
NOTE
Some functions may not display or be selectable
depending on the country setting or cable provider
selection.
5 Setting the PIN.
1 Press c/d to select “Yes”, and then press
;.
When “No” is selected, the PIN code setting is
skipped.
2
Enter a four-digit number as a PIN using the
0–9 buttons.
3 Enter the same four-digit number as in step
2 to confirm.
4 Press ;.
NOTE
When “France” is selected in the country setting, the
PIN code setting cannot be skipped.
“0000” cannot be set as the PIN code.
When the PIN code setting is skipped, the default PIN
code (“1234”) will automatically be set.
To change the PIN setting, refer to Individual setting –
PIN (Page 40). To reset the PIN setting (PIN input will no
longer be needed), refer to Reset the PIN (Page 74).
6 Starting channel search.
Digital search
Analogue search
Satellite search
Press a/b to select “Digital search”, “Analogue
search” or “Satellite search”, and then press ;.
(830 series only) After performing “Digital search”
or “Analogue search”, the screen switches to the
“Satellite search” setting. You should then execute
“Yes” if you want to search for satellite channels.
To watch both digital broadcasts and analogue
broadcasts, you should perform “Digital search” or
“Analogue search” from “Auto installation” under
the “Setup” menu (Page 37).
When you select “Satellite search”, only satellite
broadcasts will be searched.
If you want to search for more broadcasts, execute
“Additional search” from the “Programme setup”
menu (Pages 37_39).
NOTE
If you turn off the power on the TV while performing a
channel search, the initial auto installation wizard will
not appear. The auto installation function allows you
to execute the installation again from “Setup” > “View
setting” (Page 37).
The initial auto installation wizard will abort if you leave
the TV unattended for 30 minutes before searching for
channels.
When “Italy” or “France” is selected in the country
setting, the default age restriction value is set to 18.
Initial auto installation
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-46LE830E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-46LE830E in the language / languages: English as an attachment in your email.

The manual is 5,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-46LE830E

Sharp LC-46LE830E User Manual - German - 85 pages

Sharp LC-46LE830E User Manual - Dutch - 85 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info