475457
34
Zoom out
Zoom in
Previous page
1/48
Next page
Connected TV
Use the SHARP (AN-WUD630) USB adapter (sold
separately) with the TV.
Wireless connection overview
PC (Home Media Server)
Wireless LAN router/access point
Wireless
AN-WUD630
LAN USB adapter (sold separately)
Network (Internet)
NOTE
When using the SHARP wireless LAN adapter (sold
separately), try to provide as much free space around the
device for best performance.
Make sure the firewalls in your network allows access to the
TV wireless connection.
Operations cannot be guaranteed when used with access
points that do not have Wi-Fi® certification.
A wireless LAN access point is required to connect the TV to
the Internet using a wireless LAN. See the operation manual
of your access point for setup.
How to connect
1 Switch on your router before starting the network
installation.
2 Connect the
AN-WUD630
USB adapter
(sold
separately) to the USB Wi-Fi port on the TV.
• Do not use a wireless LAN adapter other than the
AN-
WUD630
Sharp wireless LAN adapter, as operations cannot
be guaranteed.
If your wireless network is secured, have the encryption key
ready to enter on screen.
3 Go to “Settings” >”Network settings”>
Network type”.
4 Press OK and / to select “Wireless”, and then
press OK.
The "Wireless" connection will be automatically selected if the TV
detects only the wireless USB adapter.
Wireless installation
5
Select "Wireless setup".
There are three ways to connect by wireless the TV
to a network:
Easy setup
1 Select WPS configuration and press OK. Press
to select "PBC" and press OK.
2 Press to select Start scan and press OK.
3 Press the WPS button on the router/access point
(AP). Wait until the connection is established.
• If connection failed, please be sure WPS feature is
enabled (See the operation manual of your router/access
point(AP) for setup.)
• In case of router/access point does not support WPS,
write the encryption key for that network using the
software keyboard. See Assisted Setup explanation.
• To establish the connection manually select "PIN",
press OK, select Start scan and press OK .Follow the
on-screen instructions and the operation manual of the
router/access point(AP).
Assisted setup
Shows the network name list (SSID).
1 Select the network you want to connect.
2
If network is protected, introduce the encryption key
using the software keyboard and press Green button.
3 Select Done and press OK.
The TV will connects to the network you have selected.
Manual setup
Allows you to establish the wireless connection introducing
all data manually.
Advanced Network Setup
Allows you to introduce manually all network setup.
Network Connection Test
Check the connection status
NOTE
To connect your TV to the internet, you must have a
broadband internet connection.
If you do not have a broadband internet connection, consult
the store where you purchased your TV or ask your internet
service provider or telephone company.
There is no need to enter the security key for subsequent
connections to the wireless network.
If your access point is set to a stealth mode (Hidden SSID,
that prevents detection by other devices), you may not be
able to establish a connection. In this case, disable the
stealth mode on the access point.
To change wireless LAN connection settings, go to
Settings” > “Network Settings”.
Any low bandwidth adapter (router, hub, wireless access
point,…) will show poor network connection and then, poor
streaming quality. It’s recommended 56 Mbps or higher
bandwidth for full feature.
Working close to other Wireless/Bluetooth network, can
appear some trouble using Wi-Fi adapter on the Connected
TV. Due to wireless link cannot be guarantee, please try to
change Wi-Fi channel on Access Point (AP) for avoiding
interferences. Please refer to Access Point User Manual.
2 Connect the ETHERNET terminal on the TV to the
router (commercially available) with an ETHERNET
cable (commercially available).
3 Go to SETTINGS >”Network settings”> “Network
type”.
4 Press OK and / to select “Wired”, and then
press OK. The wired connection will be automatically
established.
To change the settings manually go to “Advanced
Network Setup”> IP Adress Setup> Off, now you
can introduce the settings manually.
32
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-46LE730E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-46LE730E in the language / languages: English as an attachment in your email.

The manual is 9,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-46LE730E

Sharp LC-46LE730E User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info