141478
55
Zoom out
Zoom in
Previous page
1/64
Next page
C1 C2 C3 C4 P1 P2 P3 P4
0055
100
–30
0009
0
????
?
OK
ERR
RS-232C port specifications
PC Control of the TV
When a programme is set, the TV can be controlled from
the PC using the RS-232C terminal. The input signal
(PC/video) can be selected, the volume can be adjusted
and various other adjustments and settings can be made,
enabling automatic programmed playing.
Use an RS-232C cable cross-type (commercially available)
for the connections.
NOTE
This operation system should be used by a person who is
accustomed to using PCs.
Communication conditions
Set the RS-232C communications settings on the PC
to match the TV’s communications conditions. The
TV’s communications settings are as follows:
Baud rate:
9,600 bps
Data length:
8 bits
Parity bit:
None
Stop bit:
1 bit
Flow control:
None
Communication procedure
Send the control commands from the PC via the RS-
232C connector.
The TV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time.
Wait until the PC receives the OK response before
sending the next command.
Make sure to send “A” with the carriage return and
confirm that “ERR” returns before operating.
Command format
Command 4-digits: Command. The text of four
characters.
Parameter 4-digits: Parameter 0 – 9, blank, ?
Parameter
Input the parameter values, aligning left, and fill with
blank(s) for the remainder. (Be sure that four values are
input for the parameter.)
When the input parameter is not within an adjustable
range, “ERR” returns. (Refer to “Response code
format”.)
When “?” is input for some commands, the present
setting value responds.
Response code format
After sending the return code (0DH), make sure to send
line feed (0AH) as well.
Normal response
Problem response (communication error or incorrect
command)
Appendix
53
RS-232C serial control cable
(cross type, commercially
available)
Eight ASCII codes eCR
Command 4-digits Parameter 4-digits Return code
Return code (0DH)
Return code (0DH)
LC-52HD1E-gb.indd 53LC-52HD1E-gb.indd 53 2008/03/24 15:01:482008/03/24 15:01:48
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp lc 46 hd1e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp lc 46 hd1e in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 7,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp lc 46 hd1e

Sharp lc 46 hd1e User Manual - Dutch, Portuguese, Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info