141478
46
Zoom out
Zoom in
Previous page
1/64
Next page
Navigating the Digital recorder
menu
You can use the Digital Recorder with the default
values set at the factory.
This section explains how to customise these values
to meet your own preference. To change the settings,
first call the Digital Recorder menu screen as explained
below.
Press RED to display the DR archive menu.
SHARP Demo
DR archive free capacity 48:42 hrs
While in the DR archive menu screen, press
MENU to display the Digital Recorder menu
screen.
DR continuous operation on off
Digital Recorder menu
Recording quality high
Inform about hidden sections yes
Jump distance 02
Smart jump yes
Serial recording tolerance +-30
Record subtitles Yes, DVB subtitles preferred
Press a/b to select the desired item.
Press c/d to select the desired parameter or
enter value with 0 - 9.
Items Description Defaults
DR continuous
operation
If DR continuous operation
is switched on, recording is
continuous to permit time-shift
viewing.
on
Recording quality
Adjust the recording quality
for recording analogue
programmes. This results in
a change in the recording
capacity.
high
Inform about hidden
sections
If a section has been hidden in
an existing archive recording
you can choose whether to be
advised of this by a message
or not.
yes
Jump distance
For time-shift viewing and for
playing archive recordings
you can set a jump distance
(in minutes), so that you can
jump forwards or backwards
in the programmes by
pushing the buttons G or
J briefly. Enter the time
with the numeric buttons on
the remote control (always
enter two digits for 01 to 15
minutes).
yes, 02 min
1
2
3
4
HDD Digital Recorder operation
Items Description Defaults
Smart jump
By using the Smart jump
function, you can quickly and
easily find a certain point in
the recording (a time shift or
in the archive). Every time the
direction is reversed when
jumping using the buttons
G or J, the jump
distance is cut in half. Refer
to the next page for more
information on this application.
yes
Serial recording
tolerance
To avoid recording a serial
episode more than once when
it is shown several times a
day, a tolerance time must be
entered.
The serial is then only
recorded when it starts
within the start time ± serial
recording tolerance. Enter the
time with 0 - 9 on the remote
control (always enter two
digits for 01 to 60 minutes).
± 30 min
Record subtitles
If DVB or teletext subtitles
are to be recorded with DVB
programmes, select the
priority for subtitles to be
recorded here.
no
Setting pre-record time and post record time
You can set a pre-record and post record time for timer
recordings made without VPS. This reduces the risk of
parts of the programme not being recorded because it
starts earlier and/or finishes later.
NOTE
Note that this operation is performed via the TV menu, not
via the Digital Recorder menu.
In the TV mode, press MENU to display the TV
menu.
Select “Recording” with c/d and press b to
move down.
Recording
TV menu
Recording wizard
Timer list
Pre-record time
Post-record time
00 min
05 min
Setup Εxtended functio
Connections
Select “Pre-record time” or “Post-record time”
with a/b.
Enter the time with 0 - 9 on the remote control
(always enter two digits for 01 to 15 minutes
for the pre-record time, and for the Post-record
time 00 to 60 minutes).
1
2
3
4
44
LC-52HD1E-gb.indd 44LC-52HD1E-gb.indd 44 2008/03/24 15:01:322008/03/24 15:01:32
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp lc 46 hd1e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp lc 46 hd1e in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 7,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp lc 46 hd1e

Sharp lc 46 hd1e User Manual - Dutch, Portuguese, Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info