141478
17
Zoom out
Zoom in
Previous page
1/64
Next page
Connection wizard
The integrated Connection wizard shows you which
terminal you should connect your equipment to.
Connect the equipment according to the diagram and
follow the messages one after the other.
NOTE
New devices should not be connected until they have been
registered in the connection wizard.
Press MENU and the TV menu screen displays.
Press c/d to select “Connections”, and then
press b to move down.
Press a/b to select “AV setup”, and then press
OK.
The connection wizard screen displays.
Press OK. The screen shows a default screen,
which may differ from the actual connection.
Press OK to proceed.
Default screen
Connection wizard
Now the TV set assumes that you have connected the following equipment:
EXT4 EXT1 EXT2 EXT3 EXT5 EXT6
AV setup
1
2
3
4
Connecting external devices
The AV equipment selection screen opens.
Select device(s) to connect with a/b, and then
press YELLOW to mark. A marked device is
indicated with . For example, if connecting
DVD recorder with HDMI terminal to the TV,
select “HDMI/DVI” and then press YELLOW to
register. You can connect other devices in the
same way.
Connection wizard
Specify all new AV devices to be connected and all connection changes to the existing
devices here.
AV setup -> AV equipment selection
Video recorder
DVD player
DVD recorder
Satellite receiver
SetTopBox/dBox
Decoder
Camcorder/camera
Other device(s) to EXT1/2/4
Device to EXT3
Device to EXT5
Device to EXT6
DVD
DVD •
VCR
SAT
STB
Decoder
Camera
AV
COMP.IN
HDMI/DVI
HDMI/DVI
Next, the connection diagram shows how to
connect the new or preset devices to the rear
terminals. Press OK to proceed.
If you specify a decoder for connection, you will be
directed to “Select decoder station(s)” submenu.
Specify the signal type for the terminal. If you
are not sure, select the automatic setting.
Follow the instructions on the screen for the rest
of the process.
Items Explanation
Connections
and signal
The signal type of the devices that can be
connected can vary greatly. If you are not sure,
leave the setting for “Signal” on “Automatic
CVBS/YC” (e.g. for DVD Player/Recorder) or
“Autom.-VHS/SVHS” (e.g. VCR), otherwise select
the right signal type.
Immediate
playback
If the picture from a connected device is to be
displayed immediately on the TV set during
playback, select “yes”. A switching voltage is
allowed so that you do not have to switch over
manually to see the picture of the connected
device. (See the operating manual for the
connected reproduction device.)
When playing from AV Link devices, the picture is
always displayed immediately, regardless of the
setting.
Assign digital
audio input
Select the AV socket to which the device of
which you want to hear the digital sound is
connected. Connect the digital output of the
external device to the digital input of the TV set.
(Page 22) If a device with digital audio is not
connected then select “no”.
5
6
7
8
15
LC-52HD1E-gb.indd 15LC-52HD1E-gb.indd 15 2008/03/24 15:00:552008/03/24 15:00:55
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp lc 46 hd1e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp lc 46 hd1e in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 7,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp lc 46 hd1e

Sharp lc 46 hd1e User Manual - Dutch, Portuguese, Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info