13327
82
Zoom out
Zoom in
Previous page
1/89
Next page
82
Appendix
LISTINGS disappeared after a
power failure.
Some channel numbers in the TV
Guide On Screen are incorrect.
You have not received any local
program listings.
A program you set to record did
not record.
The TV did not tune to a program
you scheduled with the reminder
feature.
You set a program to “auto tune
TV” and it did not.
You set a program with the “power
on TV” option and it did not.
Problem Possible Solution
You should begin to receive listings again within 24 hours.
You can correct them using “Changing channel display” under SETUP.
Listings usually appear within 24 hours after a successful Setup.
Check the connections between the TV, cable, antenna, and the G-LINK cable if
using a cable box.
Verify Setup information under “Changing system settings”.
Make sure the cable box is on, if applicable.
Review step 3 and step 4 of “Basic Initial Setup” on page 22.
Make sure your recorder is turned off before the recording begins.
Make sure there is free space available for recording on the tape or recording
device.
• Check the SCHEDULE menu and verify that the program is listed, before
recording begins.
Check the placement of the G-LINK cable in front of your recorder.
Check the SCHEDULE menu and verify that the program is listed.
If you have a cable box, check the G-LINK cable.
Check the SCHEDULE menu and verify that the program is listed as a Reminder.
Highlight the program under LISTINGS and do the following:
- Press MENU on the remote control.
- Use b to highlight “edit reminder”, and press ENTER.
- Verify that the “auto tune TV” option reads “yes”.
The TV must be on at the scheduled time for “auto tune TV”.
Check the SCHEDULE menu and verify that the program is listed as a Reminder.
Highlight the program under LISTINGS and do the following:
- Press MENU on the remote control.
- Use b to highlight “edit reminder”, and press ENTER.
- Verify that the “power on TV” option reads “yes”.
The TV must be off at the scheduled time for “power on TV”.
Troubleshooting-TV Guide On Screen
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-45GD5U Operation Manual at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-45GD5U Operation Manual in the language / languages: English as an attachment in your email.

The manual is 3,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info