13327
22
Zoom out
Zoom in
Previous page
1/89
Next page
22
Watching TV (TV Guide On Screen)
Indicate the cable service connection.
Press a/b to select “Yes” or “No”, and then
press ENTER.
If your answer is “No”, skip to step 10.
3
Basic initial setup
Follow the on-screen prompts to configure the basic
settings.
Select your location.
1 Press a/b to select the country.
2 Enter the ZIP code (or postal code) for
your location using the number buttons
or a/b.
1
2
Indicate which input the cable box is
plugged into.
Press a/b to select the input you
connected, and then press ENTER.
To receive TV program listings in the TV Guide
On Screen system, if you select “Input 1” or
“Input 2”, please ensure your cable box is
connected to the input marked “VIDEO”, and
proceed to step 6. Do not connect your cable
box to the “COMPONENT” video of INPUT 1
or INPUT 2, as you will not receive any TV
program listings. If you select “Analog” input,
proceed to step 5.
5
Indicate the channel your TV is tuned to
when using the cable box.
Press a/b to select from “Ch 2”, “Ch 3” and
“Ch 4”, and then press ENTER.
Please consult your cable provider if you are
unsure.
The diagram on the screen shows the correct
way to connect the G-LINK cable from the
back of the TV to the cable box.
Make sure the G-LINK cable is properly
connected, and then press ENTER.
6
7
NOTE
To receive TV program listings in the TV Guide On Screen
system, please ensure to connect your cable box to the
input marked “VIDEO”, if you are connecting your cable
box to your TV using INPUT 1 or INPUT 2. Do not connect
the cable box to the “COMPONENT” video of INPUT 1 or
INPUT 2, as you will not receive any TV program listings
through this input.
Indicate the cable box connection.
Press a/b to select “Yes” or “No”, and then
press ENTER.
If your answer is “No”, skip to step 11.
Indicate the cable box brand name.
Press a/b to select the cable box brand,
and then press ENTER.
Press a/b to view more cable box brands.
4
8
10
9
11
The TV Guide On Screen system will conduct
a series of tests and when the testing is
completed the next screen will be displayed
automatically.
Do not press any buttons while testing is in
progress.
The TV Guide On Screen is now ready for
testing. Do the following:
1 Tune your cable box to channel 02.
2 Make sure to leave your cable box turned
on, and then press ENTER.
Confirm that your cable box is now tuned
to channel 09.
Press a/b to select “Yes”, “No” or “Test this
code again”, and then press ENTER.
If you select “Yes”, go to the next step.
If you select “No”, a different code is tested in
the previous screen.
If you select “Test this code again”, the same
code is tested again in the previous screen.
Indicate the antenna connection.
Press a/b to select “Yes” or “No”, and then
press ENTER.
If you select “Yes”, go to the next step.
If you selected “No” in step 2, you must
connect an antenna to your TV and select “Yes”
to receive a channel lineup and listings.
Confirm the settings.
Confirm the settings displayed on the screen
and press a/b to select “Yes, end setup”
or “No, repeat setup process”, and then
press ENTER.
Press ENTER to continue.
NOTE
Please do not use the CableCARD security module while
using cable box.
Press ENTER to continue.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-45GD5U Operation Manual at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-45GD5U Operation Manual in the language / languages: English as an attachment in your email.

The manual is 3,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info