41613
35
Zoom out
Zoom in
Previous page
1/42
Next page
33
Check if you pressed
B
on the remote control unit.
If the indicator on the TV lights up red, press
B
.
Is the AC cord disconnected?
Check if you pressed
a
on the TV.
External infl uences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after fi rst turning the power off, or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
Are batteries inserted with polarity (
e
,
f
) aligned?
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fl uorescent lighting?
Is a fl uorescent light illuminated to remote control sensor?
Is the image position correct? (Page 18)
Are screen mode adjustments (Auto format) such as picture size made correctly?
(Pages 17 and 20)
Adjust the picture tone. (Page 13)
Is the room too bright? The picture may look dark in a room that is too bright.
Check the colour system setting. (Pages 16 and 17)
Check the HDMI setup setting. (Page 15)
The unit’s internal temperature has increased.
Remove any objects blocking vent or clean.
Is sleep timer set? Press SLEEP on the remote control unit until it sets to off.
Is “No signal off” activated? (Page 18)
Is connection to other components correct? (Pages 10 and 11)
Is input signal type selected correctly after connection? (Page 15)
Is the correct input source selected? (Page 19)
Is non-compatible signal being input? (Page 34)
Is picture adjustment correct? (Page 13)
Is the antenna connected properly? (Page 4)
Is the volume too low?
Make sure that headphones are not connected.
Check if you pressed
e
on the remote control unit.
Troubleshooting
Appendix
IMPORTANT NOTE ON RESETTING THE PIN
We suggest that you remove the following instruction from the operation manual to prevent children from
reading it. As this operation manual is multilingual, we also suggest the same with each language. Keep it in a
safe space for future reference.
Cautions regarding use in high and low temperature environments
When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: –20°C to
e
60°C.
Enter “3001” when PIN entry is required.
This operation cannot be performed from the DTV menu screen.
Restore the current PIN under “Change PIN” (TV menu > Setup > Child lock).
1
2
Problem Possible Solution
• No power.
Unit cannot be operated.
Remote control unit does not
operate.
Picture is cut off.
Strange colour, light colour, or
dark, or colour misalignment.
Power is suddenly turned off.
No picture.
No sound.
LC-42XD1E_gb_d.indd 33LC-42XD1E_gb_d.indd 33 2006/10/27 10:23:082006/10/27 10:23:08
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-42XD1E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-42XD1E in the language / languages: English as an attachment in your email.

The manual is 5,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-42XD1E

Sharp LC-42XD1E User Manual - Dutch - 42 pages

Sharp LC-42XD1E User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info