461768
17
Zoom out
Zoom in
Previous page
1/34
Next page
TV menu
Features
Select menu language
Selectthemenudisplaylanguage.
1� Press MENU on your remote control and select
Features Menu language.
2� Press ≤≥ to select your language.
3� Follow the on-screen instructions to exit.
4:3 Mode
SelectaspectratiobehaviorforAutomode.When4:3
isselected,thepicturesizewillfollowWSSorScart
Pin8Spec.If16:9isselected,thepictureformatwill
changetowidescreen.
1� Press MENU on your remote control and select
Features 4:3 Mode.
2� Press ≤≥ to select the mode your preferred.
3� Follow the on-screen instructions to exit.
Change picture format
Changethepictureformattosuityourcontent.
1� Press repeatedly to select one of the
following picture formats. Alternatively, press
MENU and select Features > Picture Format.
Auto
The Automatic format
for DTV transports
streams with AFD
information, while
for ATV and SCART
should be with WSS
information.
Normal (Not for HD)
Displays the classic 4:3
format.
NOTE
• ConstantuseoftheNormalpictureformatcancause
screendistortion.
E Assign a channel decoder (For ATV)
Decodersthatdecodechannelscanbeconnected
toSCART.YouhavetoassigntheTVchannelasa
channeltobedecoded.Beforeselectingchannels,
makesureyourTVisconnectedtoSCART.
1� Press MENU on the remote control and select
TV Channels�
NOTE
• Youarepromptedtoentercurrentpasswordtoenter
ChannelsifChannel Block/Parental Guidance/
Input BlockintheParentalmenuisnotthedefault
setting.
2� Press <> to select Decoder and press OK or
to enter available analogue channel list.
3� Press <> to select the channel to decode.
4� Press OK to mark or cancel.
5� Follow the on-screen instructions to exit.
E Analogue Ch Fine Tune
Youcanmanuallyfinetuneanaloguechannelswhen
receptionispoor.
1� Press MENU on the remote control and select
TV Channels.
NOTE
• Youarepromptedtoentercurrentpasswordtoenter
ChannelsifChannel Block/Parental Guidance/
Input BlockintheParentalmenuisnotthedefault
setting.
2� Press <> to select Analogue Ch Fine Tune
and press OK or to enter the analogue
channel list.
3� Press <> to select one channel and press OK
to enter.
4� Press ≤≥ to adjust the frequency.
5� When complete, press OK to set the frequency.
The fine tuned channel is stored under the
current channel number.
6� Follow the on-screen instructions to exit.
E Clean Channel List
Selecttocleanallthechannelsthatstoredinthe
channellist.
1� Press MENU on the remote control and select
TV Channels�
NOTE
• Youarepromptedtoentercurrentpasswordtoenter
ChannelsifChannel Block/Parental Guidance/
Input BlockintheParentalmenuisnotthedefault
setting.
2� Press <> to select Clean Channel List and
press OK or to enter.
3� Select OK and press OK on the remote control
to clean channel list.
16
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-42SH330E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-42SH330E in the language / languages: English as an attachment in your email.

The manual is 7,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-42SH330E

Sharp LC-42SH330E User Manual - German - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info