65009
27
Zoom out
Zoom in
Previous page
1/32
Next page
TV menu
Source Labels
You can assign a label to each input source as you
prefer in the label list�
Go to
1. Installation > Source labels
Assign a input source and press > to select a
2.
label from label list.
Press
3. b on the remote control and check the
result.
Assign a channel decoder (For ATV)
Decoders that decode channels can be connected to
SCART� You have to assign the TV channel as a channel
to be decoded� Then assign the connection where the
decoder is connected�
Press MENU on the remote control and select
1.
Installation > Decoder.
Installation Decoder
2 ...
3 ...
1 ...
Country
Channel installation
Source labels
Decoder
Current software info
AV reset
Factory reset
Language
TV Menu
Press 2. to enter the list.
Press
3. < or > to select the channel to decode.
Press
4. OK to select or unselect the channel.
Press
5. to return to the previous menu.
Press
6. MENU to exit.
Check your current software version
Press MENU on the remote control and select
Installation > Current software info.
Update software (digital broadcasts)
If using (DVB-T) digital broadcasts, your TV automatically
receives software updates� If you receive a message
on-screen prompting you to update your software:
Select • Accept (recommended) to update the
software immediately.
Select • Reject to exit the update (not
recommended).
Select • Remind me later to be reminded to update
the software later.
NOTE
To scan all carriers for upgrade availability, perform the manual •
upgrade�
The software upgrade may take about 30 minutes, but may •
take longer (up to 1 hour) depending on the signal status�
CAUTION
Do not disconnect the AC cord when the software
upgrade is in progress, as this may cause the upgrade
to fail. If problem arises ask a qualified service
personnel before the software upgrade period expires.
AV reset
To reset the Audio and Video to default settings�
Press MENU on the remote control and select
1.
Installation > AV reset
Press
2. to select “Start now” and press OK.
Press
3. MENU to exit.
Factory reset
When you activate the Factory reset , the TV needs to
be reset from First time installation�
Press MENU on the remote control and select
1.
Installation > Factory reset
Press
2. to select “Start now” and press OK.
Press
3. MENU to exit.
25
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-42SB55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-42SB55 in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-42SB55

Sharp LC-42SB55 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info