475460
37
Zoom out
Zoom in
Previous page
1/46
Next page
USB REC function
USB REC function allows you to record a TV programme
and watch it later. Also allows you to temporize one or
more recording and they will be available for a later on
view.
These recordings will not be lost when the TV is turned off.
USB REC requires an external USB 2.0 memory,
always connected and previously configured to record
the information.
The USB 2.0 memory must be connected in USB1
terminal.
The USB 2.0 memory must be formatted before
first use for USB REC function.
Go to Multimedia>USB REC>USB REC Settings,
then press OK:
Select disk
Only available in case that there are more than one
partition in the external USB memory (Choose between
C:, D:, etc.).
Disk setup
You can choose the size of USB device which will be
used for USB REC function, in 1GByte fractions. The
USB device will be formatted.
ATTENTION:
• All the data in this device will be lost.
• In case that you have a USB device with partitions, all
the data in the selected partition will be lost.
Speed test
Allows to see the compatibility grade between USB
memory and the TV set.
NOTES:
The file system of USB device must be NTFS. If the device
has other system, the TV set does not recognize it.
The minimum USB 2.0 memory size to use with USB REC
function is 1GByte.
As a concept, USB REC can record up to 26 minutes on SD
DTV/CADTV broadcasts and 7 minutes on HD DTV/CADTV
broadcasts, for every GByte.
USB REC operation
USB REC can activate immediately recording by
using USB REC on the remote control, or with a timer
using data taken from EPG or programming an event
manually. To use either method follow the instructions
below:
Immediate recording:
The recording starts when user decides:
1 Press USB REC on the remote control to start
recording the current programme. REC symbol
appears in the bottom left corner of the screen.
2 To stop recording the current programme, press
END twice, change TV programme or input source,
or switch- off the TV set.
3 Press END during playback mode to stop the
playback and return to recording mode of current
programme. The TV set continues recording and
the REC symbol is shown on the screen.
While the recording is activated the REC symbol, the
recording progress bar or playback progress bar will be
displayed.
The bar shows the recording start time, current time
and expected end, and the remaining recording time.
Recording with timer
It can be programmed a recording by using two
methods. Using the programme guide (EPG) or manually
with the option “USB REC Manual programming” on
the menu USB REC.
1 Programming a timer with the EPG
1. Press EPG to select the programme you want to
record. Then press REC.
2. Set up the recording parameters (auto, once, every
day or weekly) and press OK to confi rm.
2 Programming with “USB REC Manual
programming”.
1. To activate a timer recording use the menu option
Multimedia > USB REC and the option USB
REC Manual programming. Press OK.
2. Set up the desired recording parameters (channel,
mode, date, start time and end) and press OK.
USB REC (Video Recorder)
USB REC function
35
SAT
USB
(HDD)
17
1
2
USB
REC
(LE732* series)
ANTENNA
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-40LE732E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-40LE732E in the language / languages: English as an attachment in your email.

The manual is 16,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-40LE732E

Sharp LC-40LE732E User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info