662065
68
Zoom out
Zoom in
Previous page
1/74
Next page
64
LC-40LB480U Full HD LED 1080p TV
CEC-compatible device
“No signal”
error message is
displayed.
Press INPUT and make sure that
you have selected the correct
input for the device or service you
are trying to use.
If you are using a cable or satellite
box, make sure that it is plugged
in and turned on.
If you are using a cable or satellite
box, use the remote that came
with that box to change channels.
Make sure that you have the
correct input selected to view
channels from the cable or
satellite box.
After Auto
Channel Search,
there are no
channels.
Reception can vary by channel
depending on the broadcast
power level of a given station.
Contact your cable or satellite TV
provider.
Make sure that the antenna or
cable/satellite TV is connected
securely to your TV.
Try replacing the cable between
the antenna/cable or
cable/satellite box and your TV.
One or more
channels do not
display.
Make sure that the channels are
not blocked. See Setting
parental control levels” on
page 50.
Make sure that the channels are
not hidden. The channel may
have been deleted from the
channel list. You can tune to the
channel by pressing the number
buttons or you can add the
channel back to the channel list.
See “Hiding channels” on
page 46.
If you are using a cable or satellite
box, use the remote that came
with that box to change channels.
Make sure that you have the
correct input selected to view
channels from the cable or
satellite box.
If you are using an antenna, the
digital channel signal may be low.
To check the digital channel
signal strength, see “Checking
the digital signal strength” on
page 48.
Password is lost.
•Enter 9999 to access parental
controls, then set a new
password. See “Setting or
changing the password” on
page 49.
Some settings
cannot be
accessed.
If a setting is grayed, the setting is
not available in the current video
input mode.
Problem Solution
TV cabinet
creaks.
When the TV is in use, the
temperature rises naturally and
may cause the cabinet to expand
or contract which can cause a
creaking noise. This is not a
malfunction.
The /INPUT
does not work.
Make sure that the Button Lock
option is set to Off. See “Locking
the power button” on page 53.
Unplug the power cord, wait a
few seconds, then plug the cord
back in and turn on your TV.
TV keeps
turning off.
Make sure that the sleep timer is
not turned on. See “Setting the
sleep timer” on page 57.
A retail banner
is displayed.
You selected “Store” mode when
you ran the EASY SETUP wizard.
Reset your TV to the factory
defaults, then select Home on the
What is your viewing environment
screen. See “Restoring settings to
the defaults” on page 60.
Problem Solution
My TV is not
displaying the
video from the
connected CEC
device.
Make sure that the HDMI cable is
connected securely to your TV
and the device.
Make sure that the device is
connected to your TV with an
HDMI cable.
Make sure that the device is a
CEC-compatible device. See the
documentation that came with
the device for more information.
Make sure that the correct video
input source is selected. See
Selecting the video input
source” on page 32.
Make sure that the CEC Control
feature is turned on. See “Turning
CEC Control on or off” on
page 35.
Try adjusting the TV picture. See
Adjusting the TV picture” on
page 40.
If the device is not a Sharp device,
it may not be compatible with
your TV.
Problem Solution
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-40LB480U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-40LB480U in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info