662065
64
Zoom out
Zoom in
Previous page
1/74
Next page
60
LC-40LB480U Full HD LED 1080p TV
Updating the TV firmware
If your TV is behaving oddly and you have tried all the solutions
in the troubleshooting pages, you may need to update the TV
firmware.
1 On the Help menu, select System Info, then write down
your model, revision, and firmware information. See
Viewing system information” on page 59.
2 Go to https://www.sharptvusa.com/support
3 Under Search by Model Number, enter LC-40LB480U, then
press ENTER.
4 Click FIRMWARE. If available, the most current firmware
version is listed.
5 Download the firmware update and copy it to a USB flash
drive.
6 Plug the USB flash drive into the USB port on the side of
your TV. A message asks if you want to update the firmware.
7 Highlight Ye s , then press ENTER.
8 Follow the on-screen instructions to install the update. Do
not turn off your TV until the update is complete.
9 When the update is complete, unplug the USB flash drive,
then press ENTER. Your TV turns off then on to complete
the update.
10 If the channel list has been deleted, you need to scan for
channels. For more information, see “Automatically
scanning for channels” on page 45.
Restoring settings to the defaults
When you restore default settings, all the settings you have
customized (except parental controls) are reset.
1 Press MENU.
2 Press
W
or
X
to highlight HELP,
then press ENTER.
3 Press
S
or
T
to highlight Reset to Default. A message asks
if you want to reset all TV settings to the default settings.
4 Press
S
or
T
to select OK (to reset) or Cancel (to not reset),
then press ENTER.
If you select OK, your TV restarts and the Easy Setup wizard
opens.
5 Go through the Easy Setup wizard. For more information,
see “Turning on your TV for the first time” on page 30.
Cautions
Make sure that you have tried all other
solutions before you upgrade the
firmware.
While the firmware is updating, do not
turn off your TV.
Note
To update the TV firmware, you need a:
Computer with an available USB port
High-speed Internet connection
•USB flash drive
Note
If you see a message that says the
firmware file is incorrect, make sure
that you have downloaded the correct
file for your model.
If you see a message that says the
update failed or the TV screen is blank
and the power LED is blinking red
then blue, turn off your TV, turn it back
on, then run the upgrade again.
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-40LB480U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-40LB480U in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info