66384
17
Zoom out
Zoom in
Previous page
1/42
Next page
15
Changing stations
with the P/ P buttons on the remote control
Station up/down
with the numeric buttons of the remote control
The TV set has a dynamic memory. If up to 9 stations are stored, you
only need to enter one digit, up to 99 two digits, up to 999 three digits
and above 999 four digits (please look in the station table to see how
many stations have been stored).
1 digit stations
Press buttons 0 – 9 for one second, and the station
changes instantly.
Or press button 0 – 9 brie y, the station then changes
after 2 seconds (the station changes immediately when
only 9 stations are stored).
2 digit stations
After brie y pressing the rst numeric button keep the
second numeric button pressed for one second, the sta-
tion then changes immediately.
Or press both numeric buttons brie y, the station then
changes after 2 seconds (the station changes immedi-
ately when only 99 stations are stored).
3 digit stations
After brie y pressing the rst and second numeric button
keep the third numeric button pressed for one second,
the station then changes immediately.
Or press the three numeric buttons brie y, the station
then changes after 2 seconds (the station changes im-
mediately when only 999 stations are stored).
4 digit stations
Press the four numeric buttons brie y, the station then
changes immediately..
Switch on/off
Your TV is equipped with an eco-standby power supply unit. On standby
the power consumption drops to low power (see page 36). Weak electric
power is still consumed even if the the unit is switched off by the ON/
OFF switch.
Attention: If you want to switch the TV set completely off you have to
remove the plug of the mains power cable from the mains power socket.
However bear in mind that in both cases EPG data will be lost and pro-
grammed timer recordings will not be performed by the TV.
Switching off
If the TV set is switched on (Mode indicator lights
green), you can switch it to standby using the red ON/
OFF button of the remote control.
The mode indicator on the TV set lights red. If the mode
indicator lights orange, a timed recording is made, EPG
data is entered or radio operation without screen display
is active.
Switching on the TV set
From standby it is best to switch back on with the red
ON/OFF button or with the numeric buttons (0 – 9) of
the remote control.
Or switch on the TV set with OK, you can see the station
table and select a station.
RADIO
Switching the Radio function on *
Radio mode is only possible if the TV set is equipped for
DVB-T/S reception or an external radio receiver is con-
nected to the AV connections EXT 1, EXT2 .
If you switch off the TV set with the
ON/OFF button
on the top of the set to standby, the mode indicator on
the TV set is no longer lit.
The unit then cannot be switched on by the remote
control.
Daily operation
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-37GD7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-37GD7 in the language / languages: English as an attachment in your email.

The manual is 6,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info