662066
67
Zoom out
Zoom in
Previous page
1/76
Next page
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the TV
serviced.
Problem Possible Solution
No power. Check if you pressed POWER on the remote control unit. (See page 16.)
If the indicator on the TV lights up red, press POWER.
Is the AC cord disconnected? (See page 10.)
Has the power been turned on? (See page 16.)
Unit cannot be operated. External infl uences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after fi rst turning the power off the TV or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
Remote control unit does not
operate.
Are batteries inserted with polarity (
e
,
f
) aligned? (See page 15.)
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fl uorescent lighting?
Is a fl uorescent light shining on the remote control sensor?
Picture is cut off. Is the image position correct? (See page 36.)
Are screen mode adjustments such as picture size made correctly? (See pages 31,
32 and 57.)
Strange colour, light colour, or
dark, or colour misalignment.
Adjust the picture tone. (See pages 34 to 36.)
Is the room too bright? The picture may look dark in a room that is too bright.
Check the colour system setting. (See pages 23 and 50.)
Check the input signal setting. (See page 59.)
Check the HDMI Auto View setting. (See page 47.)
Power is suddenly turned off. The unit’s internal temperature has increased.
Remove any objects blocking the vent or clean.
Check the power control setting. (See page 30.)
Is the sleep timer set? (See page 30.)
No picture. Is the connection to external equipment correct? (See pages 13 and 14.)
Has the input signal setup been performed correctly after connection? (See page 59.)
Is the correct input selected? (See page 50.)
Is the picture adjustment correct? (See pages 34 to 36.)
Is the antenna connected properly? (See page 10.)
Is “On” selected in “Audio Only”? (See page 26.)
No sound. Is the volume too low? (See page 21.)
Make sure that headphones are not connected. (See page 8.)
The TV sometimes makes a
cracking sound.
This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to changes in temperature. This does not affect the TV’s
performance.
65
Appendix
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature:
f
20°C to
e
60°C.
Troubleshooting-Digital broadcasting
The error message about reception of broadcast
The example of an error message
displayed on a screen
Error code Possible Solution
Failed to receive broadcast. E202
Check the antenna cable. Check that the antenna is correctly
setup.
No broadcast now. E203 Check the broadcast time in the program guide.
37D85X_en_i.indd 6537D85X_en_i.indd 65 9/20/2008 11:36:58 AM9/20/2008 11:36:58 AM
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-37D85X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-37D85X in the language / languages: English as an attachment in your email.

The manual is 12,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info