662085
45
Zoom out
Zoom in
Previous page
1/50
Next page
44
Appendix
Troubleshooting
Cautions regarding use in high and low temperature environments
When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear
slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight
or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: –20°C to +60°C.
No power.
Unit cannot be operated.
Remote control unit does not
operate.
Picture is cut off.
Strange colour, light colour, or
dark, or colour misalignment.
Power is suddenly turned off.
No picture.
No sound.
Problem Possible Solution
Check if you pressed POWER on the remote control unit. (See page 14.)
If the indicator on the TV lights up red, press POWER.
Is the AC cord disconnected? (See page 7.)
Has the power been turned on? (See page 14.)
External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after first turning the power off the TV or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
Are batteries inserted with polarity (e, f) aligned? (See page 6.)
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminated to remote control sensor?
Is the image position correct? (See page 31.)
Are screen mode adjustments such as picture size made correctly? (See pages
32 and 33.)
Adjust the picture tone. (See pages 26 to 28 and 35.)
Is the room too bright? The picture may look dark in a room that is too bright.
Check the colour system setting. (See pages 22 and 37.)
Check the input signal setting. (See page 36.)
The unit’s internal temperature has increased.
Remove any objects blocking vent or clean.
Check the power control setting. (See page 29.)
Is sleep timer set? (See page 17.)
Is connection to other equipment correct? (See pages 41 to 43)
Has input signal setup been done correctly after connection? (See page 36.)
Is the correct input selected? (See page 36.)
Is picture adjustment correct? (See pages 26 to 28.)
Is the antenna connected properly? (See page 9.)
Is “On” selected in “Audio Only”? (See page 35.)
Is the volume too low? (See page 17.)
Make sure that headphones are not connected. (See page 12.)
LC-AX3X(E)-j 05.11.18, 1:03 PM44
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-37AX3X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-37AX3X in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info