461767
15
Zoom out
Zoom in
Previous page
1/34
Next page
TV menu
E Single RF Scan
Ifusingdigitalbroadcasts,youcancheckthequality
andsignalstrengthofdigitalchannels.Thisallowsyou
torepositionandtestyourantennaorsatellitedish.
1� Press MENU on the remote control and select
TV Channels.
NOTE
• Youarepromptedtoentercurrentpasswordtoenter
ChannelsifChannel Block/Parental Guidance/
Input BlockintheParentalmenuisnotthedefault
setting.
2� Press <> to select Single RF Scan and press
OK or to enter.
Antenna mode
Menu
0 %
Scan single RF channel. (Digital Only)
RF Channel
Signal Strength
Signal Quality
21
0
Poor
Sound
Picture
TV
Eco
ExitEXITScanOK
Features
Parental
Cable mode
Menu
0 %
Scan single RF channel. (Digital Only)
Frequency (KHz)
Modulation
Symbol Rate (Ksym/s)
Signal Strength
474000
Auto
0
6875
Sound
Picture
TV
Eco
ExitEXITScanOK
Features
Parental
3� <Antenna Mode>
Highlight the RF Channel box, and press ≤≥
to select a channel number you prefer to scan.
<Cable Mode>
Configure the Frequency, Modulation, and
Symbol Rate box to scan.
4� Press OK to start scanning.
5� When the scan is completed, the result of
signal strength and signal quality appear on the
screen.
6� Follow the on-screen instructions to exit.
NOTE
• Ifthesignalqualityandstrengthispoor,repositionthe
antennaorsatellitedishandretest.
• Ifyouhavefurtherproblemswiththereceptionofyour
digitalbroadcast,contactaspecialisedinstaller.
E Analogue Manual Scan
Thissectiondescribeshowtosearchandstore
analogueTVchannelsmanually.
1� Press MENU on the remote control and select
TV Channels.
NOTE
• Youarepromptedtoentercurrentpasswordtoenter
ChannelsifChannel Block/Parental Guidance/
Input BlockintheParentalmenuisnotthedefault
setting.
2� Press <> to select Analogue Manual Scan
and press OK or to enter.
Menu
Search for analogue channels
Start Frequency (MHz)
Scan Up
Scan Down
45.00
Sound
Picture
TV
Eco
BackEXIT
Features
Parental
3� In the Start Frequency (MHz) box, enter the
frequency by using the digit buttons on the
remote control.
4� Press <> to select Scan Up or Scan Down to
scan the next available analogue channel from
the frequency you have entered.
5� Press OK or to start scanning.
6� When complete, follow the on-screen
instructions to exit.
E Favourite Network Select
WhenwatchingthedigitalTV,selectyourfavourite
networkinordertoallocatechannelsofyourfavourite
networkonthetopofchannellist(PRLIST).
1� Press MENU on the remote control and select
TV Channels�
NOTE
• Youarepromptedtoentercurrentpasswordtoenter
ChannelsifChannel Block/Parental Guidance/
Input BlockintheParentalmenuisnotthedefault
setting.
2� Press <> to select Favourite Network Select
and press OK or to enter the network list.
3� Select your favourite network and press OK.
4� Follow the on-screen instructions to exit.
NOTE
• Thismenuisavailableonlywhen1)“Norway”isselected
oncountrysettingand2)morethantwonetworksare
foundafterautomaticchannelscan.
14
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-32SH330E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-32SH330E in the language / languages: English as an attachment in your email.

The manual is 7,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-32SH330E

Sharp LC-32SH330E User Manual - German - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info