63141
29
Zoom out
Zoom in
Previous page
1/32
Next page
OPERATION MANUAL
Contents .................................................................... 1
Introduction ............................................................... 2
Dear SHARP customer ���������������������������������������� 2
Important Safety Precautions ������������������������������� 2
Remote control unit���������������������������������������������� 3
Preparation ............................................................... 5
Supplied accessories ������������������������������������������� 5
Mount the TV Stand ��������������������������������������������� 5
Wall mounting ������������������������������������������������������ 5
Installation of batteries ����������������������������������������� 6
Using the remote control unit ������������������������������� 6
Bundling the cables ��������������������������������������������� 6
Quick guide ............................................................... 7
Initial installation overview ������������������������������������� 7
First time installation ��������������������������������������������� 8
Watching TV .............................................................. 9
Daily operation ����������������������������������������������������� 9
Switching on/off ���������������������������������������������� 9
Turning on/off the power ���������������������������� 9
Standby mode ������������������������������������������� 9
TV indicator status ������������������������������������� 9
Changing channels ������������������������������������ 9
Selecting external video source ����������������������� 9
Selecting Sound mode ����������������������������������� 9
EPG (Electronic Program Guide) ������������������������ 10
Switch on EPG ���������������������������������������� 10
Teletext �������������������������������������������������������������� 11
Buttons for teletext operations ����������������� 11
Using the MHEG5 application (UK only) ������������� 11
Connecting external devices ................................. 12
Introduction to connections �������������������������������� 12
HDMI connection ������������������������������������������ 13
(YPbPr) Component connection �������������������� 13
S-Video connection �������������������������������������� 13
SCART connection ��������������������������������������� 14
Speaker/ amplifier connection ����������������������� 14
Inserting a CA Card �������������������������������������������� 15
Access CI Module service ����������������������������� 15
Menu operation....................................................... 16
Common operation �������������������������������������������� 16
Operation without a remote control ���������� 16
TV menu .................................................................. 17
Picture ��������������������������������������������������������������� 17
Adjust picture settings ���������������������������������� 17
Use smart pictures ���������������������������������������� 17
Change picture format ���������������������������������� 18
Sound ���������������������������������������������������������������� 19
Adjust sound settings ����������������������������������� 19
Features ������������������������������������������������������������� 19
Adjust feature settings ���������������������������������� 19
User timers ���������������������������������������������� 19
Automatically switch the TV to standby
(Sleeptimer) ������������������������������������������� 20
Automatically switch the TV on (Start time) 20
Automatically switch the TV off (Stop time) 20
Lock TV channels or connected devices
(Auto Lock) �������������������������������������������� 20
To set or change the Auto Lock code ������ 20
To enter the Auto Lock menu ������������������� 20
To unlock all channels and connected
devices ������������������������������������������������� 20
To set parental ratings ������������������������������ 20
Use subtitles �������������������������������������������� 21
Select a subtitle language on digital TV
channels ����������������������������������������������� 21
Listen to digital radio channels ����������������� 21
HDMI overscan ���������������������������������������� 21
Installation ���������������������������������������������������������� 22
Install channels ��������������������������������������������� 22
Rearrange channels ��������������������������������� 24
Rename channels ������������������������������������ 24
Uninstall or reinstall channels ������������������� 24
Test digital reception �������������������������������� 24
Clear program list ������������������������������������ 24
Source Labels ������������������������������������������ 25
Assign a channel decoder (For ATV) ��������� 25
Check your current software version �������� 25
Update software (digital broadcasts) �������� 25
AV reset ��������������������������������������������������� 25
Factory reset �������������������������������������������� 25
Connecting a PC ..................................................... 26
Connecting a PC ����������������������������������������������� 26
HDMI Connection ����������������������������������������� 26
Analogue Connection ����������������������������������� 26
Supported display resolutions ����������������������� 26
Computer formats (PC) ���������������������������� 26
Video formats ������������������������������������������ 26
Appendix ................................................................. 27
Troubleshooting ������������������������������������������������� 27
Specification ������������������������������������������������������ 28
Other information ����������������������������������������������� 29
Trademarks �������������������������������������������������������� 29
End of life disposal ��������������������������������������������� 30
ENGLISH
Contents
The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly •
from the actual operations�
ENGLISH
1
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product� Use a damp cloth to clean the product� Do not •
use liquid cleaners or aerosol cleaners�
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry •
tub, swimming pool and in a wet basement�
Do not place vases or any other water-filled containers on this product� •
The water may spill onto the product causing fire or electric shock�
Stand—Do not place the product on an unstable cart, stand, tripod or table� Doing so can cause the product •
to fall, resulting in serious personal injuries as well as damage to the product� Use only a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product� When mounting the product on a wall, be sure to follow the
manufacturer’s instructions� Use only the mounting hardware recommended by the manufacturer
When relocating the product placed on a cart, it must be moved with utmost care� Sudden stops, excessive force and uneven •
floor surface can cause the product to fall from the cart�
Ventilation—The vents and other openings in the cabinet are designed for ventilation� Do not cover or block these •
vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product�
Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings�
This product is not designed for built-in installation; do not place the product in an enclosed place such as a
bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed�
The LCD panel used in this product is made of glass� Therefore, it can break when the product is dropped or impact applied� If •
the LCD panel is broken, be careful not to be injured by broken glass�
Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating •
products (including amplifiers)�
To prevent fire, never place any type of candle or naked flames on the top or near the TV set�•
To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items�•
Do not display a still picture for a long time, as this could cause an afterimage to remain�•
There is power consumption always if main plug is connected�•
Servicing—Do not attempt to service the product yourself� Removing covers can expose you to high voltage and •
other dangerous conditions� Request a qualified person to perform servicing�
For ventilation, leave at least 4” to 6” free all around the TV� Do not place the TV on a carpet�•
The equipment shall not be exposed to dripping or splashing�•
The equipment shall not be exposed to rain or moisture and objects filled with liquids, such as vases, shall be placed on the •
apparatus�
The apparatus must be connected to a mains socket outlet with a protected earthed connection�•
The appliance coupler is used as the disconnect device of this apparatus, the disconnect device shall remain readily operable�•
The LCD panel is a very high technology product, giving you fine picture details�
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a
fixed point of blue, green or red�
This is within product specifications and does not constitute a fault�
Precautions when transporting the TV
When moving the TV, it should always be carried by two people, using both hands, be careful not to apply pressure to the display
Introduction
Thank you for your purchase of the SHARP LCD colour TV product� To ensure safety and many years of trouble-free operation of your
product, please read the Important Safety Precautions carefully before using this product�
Dear SHARP customer
Important Safety Precautions
2
Introduction
0
POWER
Press to turn the LCD TV on or enter
standby mode�
VIDEO
Press this button you could select YPbPr,
Side AV, HDMI 1, HDMI 2, HDMI 3�
SCART
Press this button you could select
SCART 1, SCART 2�
PC
Press to direct to the PC mode�
TV
Press to direct to the TV mode�
0-9 DIGIT BUTTONS
To select a TV channel directly
EPG
Press this button to display electronic
program guide in TV mode�
PRE PR
To display the previous selected TV channel�
b (INPUT SOURCE)
Select an input source�
ASPECT
Change the aspect ratio; please refer to
Picture format section� (see page 18)
DUAL
Select MONO, STEREO, DUAL 1 and
DUAL 2 for ATV channel� Select Audio
language for DTV channel�
SLEEP
Press to turn the LCD TV off within an
amount of time� (5-180 minutes�)
PICTURE
Press to set the LCD TV to a predefined
picture setting�
User / Cinema / Sport / Vivid / Hi-Bright
PR LIST
Press to display a list of channels� Then
press Red button to select the Digital or
Analogue channel list�
SOUND
Press to set the LCD TV to a predefined
sound setting�
Off / Rock / Pop / Live / Dance / Techno
/ Classic / Soft
i (+/-)
Press to adjust the volume�
P (</>)
Press to select the channel�
MUTE
Press to toggle audio on and off�
You can also press i (+/-) to
restore the previous volume level�
DISPLAY
Press to display the current signal
status, including input source/
channel audio mode�
MENU
Press to activate the LCD TV OSD�
Press again to exit the LCD TV
OSD�
EXIT
Press to exit LCD TV OSD�
OK
Press to activate a setting�
oœpπ
Press oœpπ
to navigate and confirm your selection�
R/G/Y/B (COLOUR BUTTON)
Press buttons to select the pictures with
various colours of text� Different channels
display different functions�
TELETEXT
Press this button to activate Teletext� Press
again to turn off Teletext�
MIX
Press this button to activate Teletext with TV
SIZE
Press this button to change the font size: Full
screen, Top half and Bottom half�
SUBPAGE
To select the subpage when the current page
contains subpage(s)� (see page 11)
INDEX
Press this button to return to page 100 or the
index page; and then press 0 to 9� The teletext
page will be numbered and added to the page
you select or the secondary item�
SUBTITLE
For DTV, press it to select subtitle setting�
Off / On / On during mute
For ATV, please activate Teletext to select
subtitle page�
HOLD
Press this button to stop the scrolling of pages�
The text decoder stops receiving data�
REVEAL
Reveal hidden information such as answers to
a quiz�
Remote control unit
3
Introduction
1 Power connector
2 SERVICE socket
3 HDMI 1
4 HDMI 2
5 PC IN (VGA/AUDIO)
6 Component Video and L/R Audio
input
7 SPDIF Output (Digital audio out)
8 AV L/R Audio Output
9 SCART 1 (CVBS Tuner out)
10 SCART 2 (CVBS Monitor out)
11 Tuner Input
12 COMMON INTERFACE slot
13 Earphone Output
14 Composite ( AV IN, AV/LR)
15 S-Video
16 HDMI 3 (For 32” and 42” only)
TV (Front view)
TV (Rear view)
4
Remote control sensor
B (Standby/On) indicator
MENU button
i (k/l)
Volume buttons
P (r/s)
Program [channel] buttons
b (INPUT SOURCE) button
a (Power) button
Preparation
Operation Manual
Quick Setup Guide
42”
26”
32”
0
Put the TV face down on a safe surface that is 1.
covered by a soft and smooth cloth.
Adjust the TV stand to the base column.
2.
Fasten 4 screws.3.
Put the TV face down on a safe surface that is 1.
covered by a soft and smooth cloth.
Unscrew the 4 bolts that fasten the base
2.
column to the TV by using a cross-head
screwdriver. (not supplied)
Detach the stand from the bottom of the TV.
3.
3
3
3
3
W
H
TV screen size
( Inches)
VESA-compatible wall
bracket
(millimeters)
(W x H)
Screw type
26” 200 x 100 mm Metric 6 x 10 mm
32” 200 x 200 mm Metric 6 x 10 mm
42” 400 x 200 mm Metric 6 x 10 mm
Supplied accessories
Mount the TV Stand
Wall mounting
5
Remote control unit (g1)
AAA battery (X2)
Cable clamp (g1)
Attached on the neck
AC cord (X1)
Product shape varies in some countries
Operation manual
Stand unit and Screws
Quick Setup Guide
Preparation
Insert two AAA batteries into Remote control. 1.
Make sure (k) and (l) are facing the proper
direction.
Replace the cover.2.
NOTE
If the remote control will not to be used for a long •
time, remove the batteries to avoid remote control damage�
CAUTION
Improper use of batteries can result in chemical leakage or explosion� Be sure to follow the instructions below
Do not mix batteries of different types� Different types of batteries have different characteristics�•
Do not mix old and new batteries� Mixing old and new batteries can shorten the life of new batteries or cause •
chemical leakage in old batteries�
Remove batteries as soon as they have worn out� Chemicals that leak from batteries can cause a rash� If you find •
any chemical leakage, wipe thoroughly with a cloth�
The batteries supplied with this product may have a shorter life expectancy due to storage conditions�•
If you will not be using the remote control unit for an extended period of time, remove the batteries from it�•
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household
rubbish� Deposit any used batteries free of charge into the designated collection containers set up at commercial
businesses�
Use the remote control unit by pointing it towards the
remote control sensor� Objects between the remote
control unit and sensor may prevent proper operation�
0
30° 30°
PC INP
C
I
N
Installation of batteries
Using the remote control unit Bundling the cables
6
5 m
Remote control sensor
Quick guide
Follow the below steps one by one when using the TV for the first time� Some steps may not be necessary depending
on your TV installation and connection�
Preparation
1
Power on and
run the auto
installation
2
Watch TV
3
Connect antenna cable to
the antenna terminal.
75Ω
If necessary, insert CA card
into the CI slot to watch
scrambled broadcasts.
Connect the AC cord to the
TV.
Turn on the TV power with a.
Run the initial auto
installation.
4 Language setting
TV Installation
Please select your language.
Next
Български
Česky
Dansk
Deutsch
Ελληνικά
English
Español
Français
4 Country setting
TV Installation
Please select your country.
NextPrevious
Slovakia
Slovenia
Spain
Sweden
Switzerland
Turkey
UK
Ukraine
Congratulations!
Now you can watch TV.
Enjoy your television ! If latter on you still want to
change a setting, you can go to the menu.
Finish Previous
If necessary, adjust the antenna to
attain maximum signal reception.
4 Start searching channels
TV Installation
System searching. Please wait...
Digital channels found:
Analogue channels found:
Auto programming may take up to 20 minutes to complete.
Please wait untill you see the Auto Programming.
NextPrevious
0
0
Initial installation overview
7
AC cord (X1)
Product shape varies in
some countries
Quick guide
After unpacking and plugging in your new LCD TV, please proceed with the following steps to set-up your TV� If you
do not run this set-up function, your LCD TV may not operate properly
Confirm the following before turning on the power
E Is the antenna cable connected?
E Is the AC cord plugged in?
Press the 1. < or > buttons to select your
language. And press the Green button to
continue.
TV Installation
Please select your language.
Next
Български
Česky
Dansk
Deutsch
Ελληνικά
English
Español
Français
Press the 2. < or > buttons to select your
country. And press the Green button to continue
or press the Yellow button to the previous.
TV Installation
Please select your country.
NextPrevious
Slovakia
Slovenia
Spain
Sweden
Switzerland
Turkey
UK
Ukraine
System searching may take up to 20 minutes to 3.
complete. Please wait until system searching is
completed, and then press the Green button to
next step.
TV Installation
System searching. Please wait...
Digital channels found:
Analogue channels found:
Auto programming may take up to 20 minutes to complete.
Please wait untill you see the Auto Programming.
NextPrevious
0
0
Channel search completed message may show 4.
out when system searching is finished. Press
the Red button to finish system searching, and
then the LCD TV will switch automatically to the
first channel found.
Enjoy your television ! If latter on you still want to
change a setting, you can go to the menu.
Finish Previous
First time installation
8
Watching TV
Turning on/off the power
Press a on the TV
Switch it off by pressing a on the TV
B indicator
Status
Off Power off
Green Power on
Red Standby
NOTE
If you are not going to use this TV for a long period of time, be •
sure to remove the AC cord from the power outlet�
A small amount of electric power is still consumed even when •
a is turned off�
TV indicator status
E
To standby mode
If the TV set is switched on, you can switch it to standby
by pressing B on the remote control�
E
Switching on from standby
From standby, press B on the remote control�
Selecting external video source
Once the connection is made,
press b to display the INPUT
SOURCE screen, and then
press </> to switch over to the
appropriate external source with
OK
Selecting Sound mode
Press Dual button on the remote control�
Select Mono, Stereo, DUAL I and DUAL II for ATV
channel� Select Audio language for DTV channel�
Source
YPbPr
TV
Side AV
SCART 1
SCART 2
PC
HDMI 1
HDMI 2
No Label
No Label
No Label
No Label
No Label
No Label
No Label
Standby mode
Changing channels
With Pr/ Ps:
Daily operation
Switching on/off
9
Watching TV
EPG is an on-screen guide that displays scheduled
digital TV programs� This guide is not available with
analogue channels� You can navigate, select and view
programs�
There are two types of EPG, ‘Now and Next’ and ‘7 or 8
day’ EPG� ‘Now and Next’ is always available but the ‘7
or 8 day’ EPG is only available in certain countries�
With the EPG menu you can:
View a list of currently broadcast digital programs.•
View upcoming programs.•
Switch on EPG
NOTE
The first time you use EPG, you may be prompted to perform •
an update� If so, follow the on-screen instructions�
Press 1. EPG on the remote control, the “Now
and Next” EPG will appear and the detailed
information about the current program is
displayed.
0
Use the colour buttons on the remote control to 2.
activate available actions.
Viewing date: Thu. 03 Jan
Televsion
I EPG
Current time: Thu. 03 Jan 16:52
1
2
7
10
11
12
13
801
BBC CHO...
BBC i
BBC NE
BBC PAR
BBC Kno
MTK_OAD
BBC ONE
BBC TWO
17:00~17:25 Children’s
Next dayPrev day Detail
17:00 The Blue Peter Quest CBBC
16:30 The Wild Thornberrys CBBC
Use the colour buttons to view 7 or 8 day EPG.3.
Prev Day• (Red): List the previous day’s EPG
Next Day• (Green): List the next day’s EPG
17:00 ~ 17:25 The Blue Peter Quest CBBC
Televsion
I EPG I Detail
Your chance to travel back onces more to the times
of pirates and buried treasure. Follow Matt and
Meg as the set out to find the Golden Galleon
that will release his granny from Jali. W/S.
Next dayPrev day Detail
Children’s
Press EPG to exit .4.
EPG (Electronic Program Guide)
10
Watching TV
Teletext
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets� Your
TV receives Teletext signals broadcast by a TV network,
and decodes them into graphical format for viewing�
News, weather and sports information, stock exchange
prices and program previews are among the many
services available�
Turning on and off Teletext
Select a TV channel or external source providing
1.
a Teletext program.
Press
2. Teletext to display Teletext.
Many stations use the TOP operating system, •
while some use FLOF (e.g. CNN). Your TV
supports both these systems. The pages are
divided into topic groups and topics. After
switching on the teletext, up to 1000 pages
are stored for fast access.
If you select a program with no Teletext signal, •
“No Teletext ” displays.
The same message displays during other •
modes if no Teletext signal is available.
NOTE
Teletext will not work if the selected signal type is RGB� •
Buttons for teletext operations
Buttons Description
P (r/s)
Increase or decrease the page
number.
Colour
(R/G/Y/B)
Select a group or block of
pages displayed in the coloured
brackets at the bottom of
the screen by pressing the
corresponding Colour (R/G/
Y/B) on the remote control unit.
0 - 9
Directly select any page from
100 to 899 by using 0 - 9.
MIX
Press this button to activate
Teletext with TV.
SIZE
Switch the Teletext image to
Top, Bottom or Full.
INDEX
Press this button to return to
page 100 or index page.
HOLD
Stop updating Teletext pages
automatically or release the hold
mode.
REVEAL
Reveal or hide hidden
information such as an answer
to a quiz.
Using the MHEG5 application (UK
only)
Some services bring you programs with the MHEG
(Multimedia and Hypermedia Expert Group) application
encoded, letting you experience DTV interactively
When provided, the MHEG5 application will start when
you press the R button�
Sample MHEG5 screen
Buttons Description
SUBPAGE
Select the subpage when
the current page contains
subpage(s).
Press number buttons on the
remote control to access the
subpage directly. (four digits)
11
Connecting external devices
E
Before connecting ...
Be sure to turn off the TV and any devices before making any connections�•
Firmly connect a cable to a terminal or terminals�•
Carefully read the operation manual of each external device for possible connection types� This also helps you get •
the best possible audiovisual quality to maximise the potential of the TV and the connected device�
VGA
Y
LR
LR
Pb Pr
SCART 1SCART 2
AUDIO
SPDIF OUT
AUDIO OUT
PC IN
COMPONENT
75Ω
SERVICE
VGA
Y
LR
LR
Pb Pr
AUDIO
SPDIF OUT
AUDIO OUT
PC IN
COMPONENT
75Ω
SERVICE
S
PDIF
OU
T
Y
L
R
Pb
Pr
COMPONEN
T
L
R
L
R
S-VIDEO
VIDEO L R
AV IN
VIDE
O
L
R
AV IN
S
-VIDE
O
O
L
R
L
R
The TV is equipped with the terminals as shown below� Find the cable corresponding the TV’s terminal and connect
the device�
* When using S-video cable, you also need to connect an audio cable (R/L).
Introduction to connections
12
Digital audio cable
HDMI device
Game console or
camcorder
Video recording
device
Audio device
HDMI Cable
DVI/HDMI Cable
Audio cable
S-video cable
*
AV cable*
Audio cable
Component cable
SCART cable
or
Audio cable
or
or
Connecting external devices
Example of connectable devices
E DVD E Blu-ray player/recorder
Example of connectable devices
E VCR E DVD E Blu-ray player/recorder
E Game console E Camcorder
Example of connectable devices
E VCR E DVD E Blu-ray player/recorder
The HDMI connections (High Definition Multimedia
Interface) permit digital video and audio transmission via
a connection cable from a player/recorder� The digital
picture and sound data are transmitted without data
compression and therefore lose none of their quality
Analogue/digital conversion is no longer necessary in
the connected devices, which also would result in quality
losses�
Y
LR
LR
Pb Pr
AUDIO
SPDIF OUT
AUDIO OUT
COMPONENT
Y
L
R
L
R
Pb
Pr
S
PDIF
OU
T
AU
DI
O
OUT
CO
MP
O
NENT
DVI/HDMI conversion
Using an DVI/HDMI adapter cable, the digital video
signals of a DVD can also be played via the compatible
HDMI connection� The sound must be fed in additionally
Both HDMI and DVI use the same HDCP copy
protection method�
Supported video signal:
576i, 576p, 480i, 480p, 1080i, 720p, 1080p
See page 26 for PC signal compatibility
You will enjoy accurate colour reproduction and high
quality images through the (YPbPr) when connecting a
DVD recorder or other recording equipment�
YPB
(
CB)
LRPR
(
CR)
COMPONENTAUDIO
Y
LR
Pb Pr
SPDIF OUT
COMPONENT
S
PDIF
OU
T
You can use the S-Video when connecting to a game
console, camcorder, a DVD recorder and some other
equipment�
S-VIDEO
VIDEO L R
AV IN
NOTE
When using an S-video cable, you also need to connect •
an audio cable (R/L).
HDMI connection
(YPbPr) Component connection
S-Video connection
13
Component cable
DVI/HDMI
adapter cable
Audio cable
HDMI cable
Audio cable
Audio cable S-video cable
or
E
When using the SCART 1
Full SCART, which transmits RGB, S-Video and CVBS
in, and CVBS tuner out�
SCART 1SCART 2
Example of connectable devices
E Decoder
Example of connectable devices
E VCR E DVD recorder
E
Connecting an amplifier with digital audio input
Y
LR
LR
Pb Pr
SPDIF OUT
AUDIO OUT
COMPONENT
DIGITAL AUDIO IN
Y
L
R
L
R
Pb
Pr
AU
DI
O
OU
T
COMPONEN
T
E
Connecting an amplifier with analogue audio
input
Y
LR
LR
Pb Pr
SPDIF OUT
AUDIO OUT
COMPONENT
Y
L
R
P
b
Pr
S
PDIF
OU
T
C
O
MP
O
NENT
LR
AUX1 IN
LR
AUX OUT
NOTE
In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input source�•
Do not connect the decoder to the SCART 2�•
You cannot connect the VCR with Decoder using a fully wired SCART cable under the SCART 2 source�•
E
When using the SCART 2
Half SCART, which transmits S-Video or CVBS in, and
CVBS monitor out�
SCART 1SCART 2
Connecting external devices
Speaker/ amplifier connection
SCART connection
14
Amplifier with analogue audio inputAmplifier with digital audio input
SCART cable
Decoder
VCRDecoder
SCART cableSCART cable
Audio cableDigital audio cable
Connecting external devices
In order to receive coded digital stations, a Common
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of your TV set�
The CI Module and the CA Card are not supplied
accessories� They are usually available from your dealer
Inserting the CA Card into the CI Module
With the side with the gold coloured contact chip
1.
facing the side of the CI Module marked with
the provider’s logo, push the CA Card into the CI
Module as far as it will go. Note the direction of
the arrow printed on the CA card.
Inserting the CI Module in the CI slot2.
C.I.
Carefully insert the CI Module in the CI slot 3.
with the contact side
forward. The logo on
the CI Module must be
facing forward from the
rear of the TV. Do not use
excessive force. Make
sure the module is not
bent in the process.
Access CI Module service
After inserting and activating the CI Module,
make sure the input source is TV
Press
1. MENU on the remote control.
Go to
2. Features > Common interface.
This menu option is only available if the CI Module is
correctly inserted and activated� On-screen applications
and content are provided by your digital TV service
operator
Inserting a CA Card
15
Menu operation
0
0
TV Menu Picture
Sound
Features
Installation
Contrast
Brightness
colour
Sharpness
Tint
colour temperature
Picture format
Smart picture Picture
Noise reduction
TV Menu Picture
Sound
Features
Installation
Contrast
Brightness
colour
Sharpness
Tint
colour temperature
Picture format
Smart picture Picture
Noise reduction
Common operation
16
1
Display the Menu Screen
Press MENU and the MENU screen displays�
Exit the Menu screen
The operation will exit the menu screen if you
press EXIT before it is completed�
2
Select an item
Press oœpπ to select/adjust the desired
menu, and adjust the item to the desired level, and
then press OK
E
Selecting in the Menu
Operation without a remote control
This function is useful when there is no remote control within your reach�
Press
1. MENU briefly to display the direct control screen.
Press
2. P r/s instead of </> or i k/l instead of / to select the item.
Press
3. MENU to confirm the selection.
NOTE
The direct control menu screen will disappear if left unattended for several seconds�•
NOTE
Menu options differ in the selected input modes, but the operating procedures are the same�•
The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from •
the actual screens�
3
TV menu
Change the picture format to suit your content�
Press
1. ASPECT on your remote control.
Alternatively, press MENU and select Picture >
Picture format.
Press 2. < or > to select one of the following
picture formats:
Automatic •
Super zoom (Not for HD)•
Removes the black
bars on the side of 4:3
broadcasts with minimal
distortion.
4:3• (Not for HD)
Displays the classic 4:3
format.
NOTE
Constant use of the • 4:3 picture format can cause screen
distortion�
Movie expand 14:9• (Not for HD)
Scales the classic 4:3
format to 14:9.
Movie expand 16:9 (Not for HD)•
Scales the classic 4:3
format to 16:9.
NOTE
Constant use of the • 16:9 picture format can cause screen
distortion�
Wide screen•
Stretches the classic 4:3
format to 16:9.
Subtitle zoom•
Scales the classic 4:3
format to 16:9.
When source input is PC mode, only 4:3 and
Wide screen are available.
For 4:3 PC input signal, picture format 4:3 and Wide •
screen are available.
For other input signals, only Wide screen is •
available.
The Automatic format for
DTV and HDMI transports
streams with AFD
information, while for ATV
and SCART should be with
WSS information.
Change picture format
18
TV menu
Automatically switch the TV to standby
(Sleeptimer)
Sleeptimer switches the TV to standby after a defined
period of time�
Press
1. MENU on the remote control and select
Features > Timer > Sleeptimer.
Press
2. to enter the Sleeptimer menu
Press
3. < or > to set the sleep time up to 180
minutes in steps of five minutes. If set to zero
minutes, the Sleeptimer is switched off.
Press
4. OK to activate the Sleeptimer.
NOTE
You can always switch off your TV earlier or reset Sleeptimer •
during the countdown�
Automatically switch the TV on
(Start time)
Start time switches the TV to a specified channel at a
specified time, from standby
Press
1. MENU on the remote control and select
Features > Timer > Start time.
Press
2. to enter the start time menu.
Use
3. < or >, or to select and enter the menu
items to set.
Press
4. OK to confirm your choice.
Press
5. MENU to exit.
NOTE
To switch off • Start time, select Off in the Start time menu�
Automatically switch the TV off
(Stop time)
Stop time switches the TV to standby at a specified
time�
Press
1. MENU on the remote control and select
Features > Timer > Stop time.
Press
2. to enter the Stop time menu.
Use
3. < or > , or to select and enter the
menu items to set.
Press
4. OK to confirm.
Press
5. MENU to exit.
Lock TV channels or connected devices
(Auto Lock)
Lock TV channels or connected devices with a four digit
code to prevent children from watching unauthorised
content�
To set or change the Auto Lock code
Press1. MENU on the remote control and select
Features > Auto lock > Change code.
Press
2. to enter the code setup.
Enter your code with the number buttons.
3.
The Features menu reappears with a message
confirming that your code is created or changed.
NOTE
If you forget your code, enter ‘0711’ to override any existing •
codes�
To enter the Auto Lock menu
Press 1. MENU on the remote control and select
Features > Auto Lock and press > to enter your
code.
Enter your code with the number buttons.
2.
To unlock all channels and connected
devices
In the 1. Auto Lock menu, select Clear all.
Press 2. OK.
To set parental ratings
Some digital broadcasters rate their programs according
to age� You can set your TV to display only programs
with age ratings higher than your child’s�
In the
1. Auto Lock menu, select Parental rating.
Press
2. to enter.
Press
3. < or > to select age rating.
Select the age and Press
4. OK.
Press
5. Menu to exit the menu.
20
TV menu
Use subtitles
You can enable subtitles for each TV channel� Subtitles
are broadcasted via teletext or DVB-T digital broadcasts�
With digital broadcasts, you have the additional option of
selecting a preferred subtitle language�
Press
1. MENU on the remote control and select
Features > Subtitle.
Press
2. to enter the list.
TV Menu Features
Sound
Features
Installation
Auto lock
Subtitle language
HDMI overscan
Common interface
TimerPicture
Subtitle
Press 3. < or > to select On to display subtitles
always or On during mute to display subtitles
only when the sound is muted with the MUTE
button on the remote control.
Press
4. OK to return to the Features menu.
Select a subtitle language on digital TV
channels
When you select a subtitle language on a digital TV
channel as described below, the preferred subtitle
language set in the Installation menu is temporarily
overruled�
Press
1. MENU on the remote control and select
Features > Subtitle Language.
Press
2. to enter the list of available languages.
Press
3. < or > to select a subtitle language.
Press
4. OK.
Listen to digital radio channels
If digital broadcasting is available, digital radio channels
are installed automatically during installation� To reorder
the digital radio channels, see Section Rearrange the
channels
Press
1. PR LIST on the remote control. The
Channels list menu is displayed.
Use the number buttons to select a radio
2.
channel.
Press
3. OK.
HDMI overscan
When you watch TV by HDMI input source, you could
use this function to enlarge the picture� It may have few
loss of video content�
Press
1. MENU on the remote control and select
Features > HDMI overscan
Select • On to activate.
Select • Off to disable.
21
TV menu
Fine tune analogue channels
You can manually fine tune analogue channels when
reception is poor
Press
1. MENU on the remote control and select
Installation > Channel installation > Analogue:
manual installation > Fine tune.
Press
2. to enter the Fine tune menu.
Press
3. < or > to adjust the frequency.
Press
4. when done.
Select
5. Store current channel to store the fine
tuned channel under the current channel number.
Press
6. to enter.
Press
7. OK. Done appears.
Press
8. MENU to exit.
Rearrange channels
Press 1. MENU on the remote control and select
Installation > Channel installation > Rearrange.
Press
2. to enter the Rearrange list.
Press
3. < or > in the Rearrange list to select the
channel you want to rearrange.
Press the yellow button to move the channel
4.
up the list, or press the blue button to move the
channel down the list.
Press
5. MENU to exit.
Rename channels
Press 1. MENU on the remote control and select
Installation > Channel installation > Rearrange.
Press
2. to enter the Rearrange list.
Press
3. < or > in the Rearrange list to select the
channel you want to rename.
Press the red button. (
4. Rename)
Press
5. and to select characters or < and >
to change the characters. Space, numbers (0-9)
and other special characters are located between
z and A.
Press the green button or
6. OK to finish.
NOTE
Delete all characters by pressing the yellow button� Delete •
only the highlighted character by pressing the blue button�
Uninstall or reinstall channels
You can uninstall a stored channel or reinstall an
uninstalled channel�
Press
1. MENU on the remote control and select
Installation > Channel installation > Rearrange.
Press
2. to enter the Rearrange list.
Press
3. < or > to select the channel you want to
uninstall or reinstall.
Press the green button to uninstall or reinstall the
4.
channel.
Press
5. MENU to exit.
Test digital reception
If using digital broadcasts, you can check the quality and
signal strength of digital channels� This allows you to
reposition and test your antenna or satellite dish�
Press
1. MENU on the remote control and select
Installation > Channel installation > Digital:
Test reception.
Press
2. OK.
Press the green button to automatically start
3.
the test or manually enter the frequency of the
channel you want to test. If the signal quality
and strength is poor, reposition the antenna or
satellite dish and retest.
When complete, press the yellow button to store
4.
the frequency.
Press the red button to return to the
5. Channel
installation menu.
Press
6. MENU to exit.
NOTE
If you have further problems with the reception of your •
digital broadcast, contact a specialised installer
Clear program list
You can erase the program list�
Press
1. MENU on the remote control and select
Installation > Channel installation > Clear
program list.
Press
2. MENU to exit.
24
Appendix
Problem Possible Solution
No picture 1� Connect power cord correctly
2� Turn on power
3� Connect signal cable correctly
4� Press any button on the LCD TV
Abnormal colours Connect signal cable correctly
Twisted picture 1� Connect signal cable correctly
2� Please use compatible signal�
Picture too dark Adjust brightness and contrast�
Audio only, no images 1� Please check if input signal is connected correctly
2� TV-RF signal must not be lower than 50dB�
Picture only, no audio 1� Connect signal cable correctly
2� Adjust volume to proper level�
3� Connect audio signal cable correctly
4� TV-RF signal must not be lower than 50dB�
Cannot use remote control 1� Please change battery
2� Turn off power for 10 seconds; and then restart power
Cannot receive sufficient channels
through antenna
Please use the Channel scan function to increase the number of
channels not included in memory
No colours Please adjust the colour setup�
Blinking picture accompanied by ghost
image
1� Check the connection of antenna/signal cable�
2� Check if channel is in play mode�
3� Press signal source and change input mode�
Broken lines or segments Adjust antenna�
Keep the TV away from noise sources, such as automobiles, neon
lights, and hair dryers�
Certain TV channels are blocked (Hope to
acquire some channels)
Please use the Update scan method to add the channels not
included in memory
Overlapping images or ghost images Please use multi-directional outdoor antenna�
(If your TV is subject to the influence of nearby mountains or
buildings)�
Cannot use a function If the item you choose turns gray, that item cannot be selected�
Cannot receive programs Please use the Update scan method to add the channels not
included in memory
Troubleshooting
27
Appendix
Item
26o LCD COLOUR TV,
Model: LC-26SB25E,
LC-26SB25S
32o LCD COLOUR TV,
Model: LC-32SB25E,
LC-32SB25S
42o LCD COLOUR TV,
Model: LC-42SB55E,
LC-42SB55S
LCD screen size
26o diagonal 32o diagonal 42o diagonal
Number of dots 3,147,264 dots
(1366 g 768 g 3 dots)
3,147,264 dots
(1366 g 768 g 3 dots)
6,220,800 dots
(1920 g 1080 g 3 dots)
Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV Function TV-Standard Analogue CCIR (B/G, I, D/K, L/L’)
Digital DVB-T (2K/8K OFDM)
Receiving
Channel
VHF/UHF ATV : IRA-E69, DVB-T : E5-E69
CATV S-band, S1–S41ch
TV-Tuning System Auto Preset 999 ch, Auto Label, Auto Sort
STEREO/BILINGUAL NICAM/A2
Brightness 500 cd/m
2
450 cd/m
2
500 cd/m
2
Backlight life 60,000 hours (at Backlight Standard position)
Viewing angles H : 160° V : 150° H : 176° V : 176°
Audio amplifier
5W g 2 5W g 2 10W g 2
Speaker
(100 mm g 30 mm) g 2 (100 mm g 30 mm) g 2 (140 mm g 30 mm) g 2
Rear
Side
Antenna
UHF/VHF 75 q
RS-232C D-Sub 3 pin male connector
SCART 1 SCART (AV input, Y/C input, RGB input, TV output-analogue only)
SCART 2 SCART (AV input, Y/C input, monitor output (analogue source - RF, SCART 1, SIDE AV; digital
source - DTV sound only) )
PC IN VGA pin (AV input), Ø 3.5mm jack (Audio input)
Component Y/Pb(Cb)/Pr(Cr), RCA pin (L/R)
SPDIF Digital audio output
AUDIO OUT RCA pin (L/R)
HDMI 1
HDMI 2
C. I. (Common Interface) EN50221, R206001
Headphones Ø 3.5mm jack (Audio output)
AV IN RCA pin (AV input) , RCA pin (L/R), S-VIDEO (Y/C input)
HDMI 3 For 32” and 42” only
OSD language Bulgarian, Croatian, Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian,
Italian, Norwegian, Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
Swedish, Turkish
Power Requirement AC 220–240 V, 50 Hz
Power Consumption 100W (Standby<1W)
(Method IEC60107)
150 W (Standby<1W)
(Method IEC60107)
220 W (Standby<1W)
(Method IEC60107)
Weight 7.8 kg (Without stand),
9.6 kg (With stand)
10.7 kg (Without stand),
12.5 kg (With stand)
19.5 kg (Without stand),
22.7 kg (With stand)
Operating temperature
0°C to k40°C
As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement •
without prior notice� The performance specification figures indicated are nominal values of production units� There may be some deviations
from these values in individual units�
NOTE
Refer to the inside back cover for dimensional drawings�•
Audio cannot be output through the HDMI terminal�•
Specification
28
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-32SB25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-32SB25 in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-32SB25

Sharp LC-32SB25 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info