453019
4
Zoom out
Zoom in
Previous page
1/52
Next page
LC-32LE700E LC-32LE700S
LC-40LE700E LC-40LE700S
LC-46LE700E LC-46LE700S
LC-52LE700E LC-52LE700S
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISEUR COULEUR À ÉCRAN
CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
TELEVISOR DE CRISTAL LÍQUIDO
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
MANUAL DE OPERAÇÃO
SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg
SHARP CORPORATION
http://www.sharp-eu.com
Printed in Poland
Gedruckt in Polen
Imprimé en Pologne
Stampato in Polonia
Gedrukt in Polen
Impreso en Polonia
Impresso na Polónia
TINS-E281WJN1
09P10-PL-NG
PIN
LC-32LE700E/LC-32LE700S/
LC-40LE700E/LC-40LE700S/
LC-46LE700E/LC-46LE700S/
LC-52LE700E/LC-52LE700S
E281WJN1
OPERATION MANUAL/BEDIENUNGSANLEITUNG/MODE D’EMPLOI/MANUALE DI
ISTRUZIONI/GEBRUIKSAANWIJZING/MANUAL DE MANEJO/MANUAL DE OPERAÇÃO
1
LC-32LX700E LC-40LX700E LC-46LX700E
LC-32LU700E LC-32LU700S LC-40LU700E LC-40LU700S LC-46LU700E LC-46LU700S
LC-32LE705E LC-32LE705S LC-40LE705E LC-40LE705S
LC-46LE705E LC-46LE705S LC-52LE705E LC-52LE705S
LC-32LX705E LC-40LX705E LC-46LX705E
LC-32LU705E LC-32LU705S LC-40LU705E LC-40LU705S LC-46LU705E LC-46LU705S
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
ESPAÑOL
PORTUGUÊS
Cover_GB01_LE705E.indd 1Cover_GB01_LE705E.indd 1 2009/10/09 13:54:082009/10/09 13:54:08
1
OPERATION MANUAL
ENGLISH
The illustrations and the OSD in this operation manual are for
explanation purposes and may vary slightly from the actual
operations.
The examples used throughout this manual are based on the
LC-46LE700E model.
LC-32LE700E, LC-32LE700S, LC-32LX700E, LC-32LU700E,
LC-32LU700S, LC-40LE700E, LC-40LE700S, LC-40LX700E,
LC-40LU700E, LC-40LU700S, LC-46LE700E, LC-46LE700S,
LC-46LX700E, LC-46LU700E, LC-46LU700S, LC-52LE700E,
LC-52LE700S, LC-32LE705E, LC-32LE705S, LC-32LX705E,
LC-32LU705E, LC-32LU705S, LC-40LE705E, LC-40LE705S,
LC-40LX705E, LC-40LU705E, LC-40LU705S, LC-46LE705E,
LC-46LE705S, LC-46LX705E, LC-46LU705E, LC-46LU705S,
LC-52LE705E and LC-52LE705S models are compatible with
H.264 (MPEG4 H.264, MPEG4 AVC, MPEG4 AVC/H.264)
compressed broadcasts.
Only the LC-32LE705E, LC-32LE705S, LC-40LE705E, LC-
40LE705S, LC-46LE705E, LC-46LE705S, LC-32LX705E,
LC-40LX705E, LC-46LX705E, LC-32LU705E, LC-32LU705S,
LC-40LU705E, LC-40LU705S, LC-46LU705E and LC-
46LU705S models are compatible with the Common Interface
(CI) standard as well as the enhanced security Common
Interface Plus (CI+) standard.
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour
TV product. To ensure safety and many years of trouble-
free operation of your product, please read Important
safety precautions carefully before using this product.
Trademarks
“HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
The “HD TV 1080p” Logo is a trademark of EICTA.
The DVB logo is the registered trademark of the Digital
Video Broadcasting—DVB—project.
LC_ LCFONT+ and LC logo mark
are registered trademarks of SHARP Corporation. This
product is embedded with LC Font technology, which was
developed by SHARP Corporation for clearly displaying
easy-to-read characters on an LCD screen. However, other
non-LCD fonts are used for displaying some screen pages.
ENGLISH
Introduction ................................................................. 2
Important safety precautions ................................. 2
Remote control unit .............................................. 3
TV (front view) ....................................................... 4
TV (rear view) ........................................................ 4
Preparation.................................................................. 5
Supplied accessories ............................................ 5
Attaching the stand unit ........................................ 5
Inserting the batteries............................................ 6
Using the remote control unit ................................ 6
Quick guide ................................................................. 7
Initial installation overview...................................... 7
Before turning on the power ................................. 8
Initial auto installation ............................................ 9
Inserting the CA card into the CI module ............. 11
Watching TV .............................................................. 12
Daily operation .................................................... 12
EPG .................................................................... 13
Teletext ............................................................... 15
Connecting external devices ................................... 16
Video connections .............................................. 16
Audio connections .............................................. 18
AQUOS LINK ............................................................. 19
Controlling HDMI devices using AQUOS LINK ..... 19
AQUOS LINK connection .................................... 19
AQUOS LINK setup ............................................ 20
Operating an AQUOS LINK device ...................... 21
Menu operation......................................................... 22
What is the MENU? ............................................ 22
Basic adjustment ...................................................... 23
Picture settings ................................................... 23
Audio settings ..................................................... 25
Power save settings ............................................ 26
Channel settings ................................................. 27
Password/Parental lock settings ......................... 30
Other basic adjustments ..................................... 30
Useful viewing functions .......................................... 31
Selecting the picture size .................................... 31
Language settings .............................................. 32
Display settings ................................................... 33
Other useful features ............................................... 34
Setting when using external devices ................... 34
Additional features .............................................. 34
Connecting a USB device ................................... 35
USB Photo viewer/Music player .......................... 35
Connecting a PC ....................................................... 37
Connecting a PC ................................................ 37
Displaying a PC image on the screen .................. 37
RS-232C port specifications ............................... 39
Appendix ................................................................... 41
Troubleshooting .................................................. 41
Updating your TV via DVB-T ............................... 42
Reset .................................................................. 42
Identification ....................................................... 42
Updating your TV via USB .................................. 43
Specifications ..................................................... 44
Environmental specifications ............................... 46
End of life disposal .............................................. 48
LC-LE705E_GB.indd 1LC-LE705E_GB.indd 1 2009/10/09 14:12:482009/10/09 14:12:48
2
Important safety precautions
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use
liquid cleaners or aerosol cleaners.
Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean it.
Chemicals may cause damage or cracks in the cabinet of the TV.
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and
in a wet basement.
Do not place vases or any other water-filled containers on this product. The water may spill onto the product
causing fire or electric shock.
Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product
to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod,
bracket or table recommended by the manufacturer or sold with the product. When mounting the product on
a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the
manufacturer.
When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive
force and uneven floor surface can cause the product to fall from the cart.
Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or block
these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the
product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation
openings. This product is not designed for built-in installation; do not place the product in an enclosed place
such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are
followed.
The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or
impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.
Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-
generating products (including amplifiers).
To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
Headphones—Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
Do not display a still picture for a long time, as this could cause an afterimage to remain.
There is power consumption always if main plug is connected.
Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous
conditions. Request a qualified person to perform servicing.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of blue, green or
red. This is within product specifications and does not constitute a fault.
Precautions when transporting the TV
When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two people holding it with two
hands—one hand on each side of the TV.
Devices connected to the protective earthing of the building installation through the MAINS connection or through other devices with a
connection to protective earthing and to a television distribution system using coaxial cable, may in some circumstances create a fire
hazard. Connection to a television distribution system therefore has to be provided through a device providing electrical isolation within a
certain frequency range (galvanic isolator, see EN 60728-11).
NOTE
For requirements in Norway and Sweden, the requirements for isolation are also relevant for devices that can be connected to
television distribution systems.
Introduction
LC-LE705E_GB.indd 2LC-LE705E_GB.indd 2 2009/10/09 14:12:492009/10/09 14:12:49
3
Remote control unit
B (Standby/On)
(Page 12)
Buttons for useful operations
m (Teletext)
ATV: Display analogue teletext
(Page 15).
DTV: Select MHEG-5 and teletext
for DTV (Page 15).
k (Reveal hidden teletext)
(Page 15)
[ (Subtitle)
Switch subtitle languages on/off
(Pages 15 and 32).
3 (Freeze/Hold)
Press to freeze a moving image on
the screen.
Teletext: Stop updating teletext
pages automatically or release the
hold mode.
1 (Subpage)
(Page 15)
v (Top/Bottom/Full)
Set the area of magnification in
teletext mode (Page 15).
Numeric buttons 0_9
Set the channel.
Enter desired numbers.
Set the page in teletext mode.
When the five Nordic countries
(Sweden, Norway, Finland,
Denmark or Iceland) are selected
in the country setting from “Auto
installation” (page 27), DTV
services are four digits. When
another country is selected, DTV
services are three digits.
A (Flashback)
Press to return to the previously
selected channel or external input.
DTV
Press to access digital TV mode.
ATV
Press to access conventional
analogue TV mode.
2 (Sound mode)
Select a sound multiplex mode
(Page 12).
i+/- (Volume)
Increase/decrease TV volume.
e (Mute)
TV sound on/off.
1
2
3
4
5
6
7
8
9
15
16
17
18
19
20
21
22
23
24
25
4
3
2
5
6
7
8
9
10
11
12
13
14
1
f (WIDE MODE)
Select a wide mode (Pages 31
and 37).
#
Select a video setting (Page 24).
a/b/c/d (Cursor)
Select a desired item on the setting
screen.
;
Execute a command within the
“MENU” screen.
ATV/DTV: Display the programme
list when no other “MENU” screen
is running.
0
Q
W
>
Exit the “MENU” screen.
R/G/Y/B (Colour) buttons
The coloured buttons are
correspondingly used to select the
coloured items on the screen (e.g.,
EPG, MHEG-5, teletext).
b (INPUT SOURCE)
Select an input source (Page 12).
EPG
DTV: Display the EPG screen
(Pages 13_14).
RADIO
DTV: Switch between radio and
data mode.
When only data broadcasting
(no radio broadcasting) is
transmitted by DVB, the radio
broadcasting will be skipped.
P. INFO
Press to display programme
information which is transmitted
through digital video broadcasting in
the upper left corner of the screen
(DTV only).
:r/s
Select the TV channel.
p (Display information)
Press to display the station
information (channel number, signal,
etc.) in the upper right corner of the
screen (Page 33).
ECO (Standard/Advanced/Off)
Select “Energy save” setting (Page
26).
@
“MENU” screen on/off.
6 (Return)
Return to the previous “MENU”
screen.
SLEEP
Press to schedule a time for the TV
to automatically standby (Page 26).
AQUOS LINK buttons
If external equipment such as a
AQUOS BD player is connected via
HDMI cables and is AQUOS LINK
compatible, you can use these
AQUOS LINK buttons. See pages
19 and 21 for details.
E
R
T
Y
U
I
O
P
A
S
D
F
G
Introduction
LC-LE705E_GB.indd 3LC-LE705E_GB.indd 3 2009/10/09 14:12:502009/10/09 14:12:50
4
TV (front view)
2 3 45
6
1
7
8
9
10
Blue illumination LED
B (Standby/On indicator)
OPC indicator
Remote control sensor
OPC sensor
a (Power button)
@ (Menu button)
b (Input source button)
:r/s (Programme [channel]
buttons)
i+/- (Volume buttons)
1
2
3
4
5
6
7
8
9
10
TV (rear view)
1
2
6
8
11
12
14
13
15
16 17 18 19
9
10
3
4
5
7
*1
*2
COMMON INTERFACE slot
USB terminal
HDMI 4 (HDMI) terminal
EXT 9 (VIDEO/AUDIO) terminals
Headphones
AC INPUT terminal
MAIN POWER switch
HDMI 3 (HDMI) terminal
HDMI 1 (HDMI) terminal
EXT 4 (ANALOGUE RGB (PC))
terminal
Antenna terminal
HDMI 2 (HDMI) terminal
HDMI 2/PC AUDIO (R/L) jack
DIGITAL AUDIO OUTPUT
terminal
RS-232C terminal
EXT 3 (COMPONENT/AUDIO)
terminals
EXT 1 (RGB) terminal
EXT 2 (AV) terminal
OUTPUT (AUDIO) terminals
WARNING
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Do not set the volume at a high level.
Hearing experts advise against extended
listening at high volume levels.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
When the MAIN POWER switch is turned off (a), the amount of electric power consumed will be reduced to 0.01 W or less. However,
unlike when unplugging the AC cord, the power is not completely disconnected.
The HDMI 2 and EXT 4 terminals can both use the same audio input terminal (HDMI 2/PC AUDIO (R/L)). However, the proper item must
be selected in the “PC audio select” menu (refer to page 25 for details).
I
J
Introduction
LC-LE705E_GB.indd 4LC-LE705E_GB.indd 4 2009/10/09 14:12:502009/10/09 14:12:50
5
Supplied accessories
Remote control unit ( x 1) AC cord ( x 1) Cable clamp ( x 1) Stand unit ( x 1)
Product shape varies in
some countries.
For 32 inch models
For 40/46/52 inch models
Pages 3 and 6 Page 8 Page 8 Page 5
Operation manual (this publication)
“AAA” size zinc-carbon battery ( x 2) ... Page 6
Attaching the stand unit
Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Confirm that there are eight screws with the
stand unit.
Models Screws
32 inch models
AB
40/46/52 inch models
CD
Attach the supporting post for the stand unit
onto the base using the four screws with the
screw driver as shown.
*
Supporting
post
32 inch models: Use Screws B in the table in step 1.
40/46/52 inch models: Use Screws D in the table in step 1.
1
2
*
*
Inserting the stand.
Insert the stand into the openings on the
bottom of the TV (hold the stand so it will not
drop from the edge of the base area).
Insert and tighten the four screws into the four
holes on the rear of the TV.
1
1
2 2
Soft cushion
32 inch models: Use Screws A in the table in step 1.
40/46/52 inch models: Use Screws C in the table in step 1.
NOTE
To detach the stand unit, perform the steps in reverse order.
A screw driver is not supplied with this product.
The stand base is made of glass. Therefore, be careful not to
drop the stand base or apply pressure to it.
Do not place heavy objects on the stand base.
3
1
2
*
*
Preparation
LC-LE705E_GB.indd 5LC-LE705E_GB.indd 5 2009/10/09 14:12:512009/10/09 14:12:51
6
Inserting the batteries
Before using the TV for the first time, insert two supplied “AAA” size zinc-carbon batteries. When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Open the battery cover.
Insert two supplied “AAA” size zinc-carbon
batteries.
Place batteries with their terminals corresponding to the (e)
and (f) indications in the battery compartment.
Close the battery cover.
1
2
3
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Do not mix batteries of different types. Different types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old
batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical leakage,
wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
When replacing the batteries, use zinc-carbon batteries instead of alkaline ones.
Note on disposing batteries
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household rubbish.
Deposit any used batteries free of charge into the designated collection containers set up at commercial businesses.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control unit
and sensor may prevent proper operation.
5 m
Remote control sensor
Cautions regarding the remote control unit
Do not expose the remote control unit to shock. In addition, do not expose the remote
control unit to liquids, and do not place in an area with high humidity.
Do not install or place the remote control unit under direct sunlight. The heat may cause
deformation of the unit.
The remote control unit may not work properly if the remote control sensor of the TV is
under direct sunlight or strong lighting. In such cases, change the angle of the lighting or
the TV, or operate the remote control unit closer to the remote control sensor.
Preparation
LC-LE705E_GB.indd 6LC-LE705E_GB.indd 6 2009/10/09 14:12:532009/10/09 14:12:53
7
Initial installation overview
Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending
on your TV installation and connection.
Preparation
Connect an antenna cable to the
antenna terminal (Page 8).
If necessary, insert a CA
card into the CI slot to watch
scrambled broadcasts (Page 11).
Connect the AC cord to the TV
(Page 8).
Product shape varies in some
countries.
Run the
initial
settings
Turn on (;) the MAIN POWER
switch on the left side of the TV
(Page 4).
The factory default for the MAIN
POWER switch is set to on (;).
Turn on the power using a on
the TV (Page 12).
Run the initial auto installation
(Page 9).
Language setting
Home/Store setting
HOME
STORE
Country setting
Austria
Finland
Greece
Channel search
setting
Digital search
Analogue search
Start searching
channels
Watch TV
Congratulations!
Now you can watch TV.
If necessary, adjust the antenna
to attain maximum signal
reception (Page 11).
Connect external
devices
Connect external devices
such as a DVD player/
recorder as instructed (Pages
16_18).
Connect external audio
devices such as speakers/
amplifier as instructed (Page
18).
Quick guide
LC-LE705E_GB.indd 7LC-LE705E_GB.indd 7 2009/10/09 14:12:542009/10/09 14:12:54
8
Before turning on the power
2
*
1
Cable clamp (bundle the cables with the clamp)
Standard DIN45325 plug (IEC 169-2) 75 q coaxial cable
Turn on (;) the MAIN POWER switch on the left side of the TV.
AC cord (product shape varies in some countries)
The AC cord is supplied either with a ferrite core or without a ferrite core. Neither type
causes unnecessary electrical wave emissions or interference.
*
Place the TV close to the AC outlet,
and keep the power plug within
reach.
Supplying power to the antenna
You must supply power to the antenna in order to receive digitally/terrestrially broadcast stations after connecting
the antenna cable to the antenna terminal on the rear of the TV.
Press @ and the “MENU” screen displays.
Press c/d to select “Setup”.
Press a/b to select “Antenna setup-DIGITAL”, and then press ;.
Press a/b to select “Supply voltage”, and then press ;.
Press c/d to select “On”, and then press ;.
1
2
3
4
5
Mounting the TV on a wall
This TV should be mounted on a wall only with the wall mount bracket and attachment* available from SHARP (Page 46).
The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that
results in accident or injury.
You can ask qualified service personnel about using an optional bracket and attachment* to mount the TV to a wall.
When you mount the TV on a wall, you should attach the supporting post.
Only for 40 inch models.
*
Quick guide
LC-LE705E_GB.indd 8LC-LE705E_GB.indd 8 2009/10/09 14:12:572009/10/09 14:12:57
9
Initial auto installation
When the TV is powered on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings one
after another.
Confirm the following before turning on
the power
Is the antenna cable connected?
Is the AC cord plugged in?
Is the MAIN POWER switch turned on (;)?
E
E
E
Press a on the TV.
The initial auto installation wizard appears.
Setting the OSD language.
Press a/b/c/d to select the desired language,
and then press ;.
Selecting the location of the TV.
HOME
STORE
Press c/d to select where you will use this TV,
and then press ;.
HOME: “STANDARD” will be the default value for the “AV
MODE” setting.
STORE: “DYNAMIC (Fixed)” will be the default value for
the “AV MODE” setting. If the “AV MODE” is changed,
the TV will automatically switch back to “DYNAMIC
(Fixed)” when there is no signal input from the TV or
remote control unit for 30 minutes.
A demonstration image will be displayed after initial auto
installation is completed. If you have chosen “STORE” by
mistake, go to “Setup” > “Reset” > select “HOME” again.
Setting the country.
Austria
Finland
Greece
Press a/b/c/d to select your country or area,
and then press ;.
This setting screen only appears during the first
installation.
1
2
3
4
NOTE
If you set “Sweden” in the country setting, you can select
the cable provider “ComHem”. Refer to the H mark
in the following steps or instructions about the settings for
“ComHem”.
Starting channel search.
Digital search
Analogue search
Press c/d to select “Digital search” or “Analogue
search”, and then press ;.
To watch both analogue broadcasts and digital
broadcasts, you should perform the auto installation
setting for each format (Page 27).
If you want to search for more broadcasts, execute
“Additional search” from the “Programme setup” menu
(Pages 27_29).
NOTE
If you turn off the power on the TV while performing a channel
search, the initial auto installation wizard will not appear. The
auto installation function allows you to execute the installation
again from the “Setup” menu (Page 27).
The initial auto installation wizard will abort if you leave the TV
unattended for 30 minutes before searching for channels.
After initial auto installation is completed, the default PIN is
automatically set to “1234”. To change the PIN setting, refer to
Password/Parental lock settings (Page 30). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN (Page 41).
When “Italy” is selected in the country setting, the default age
restriction value is set to 18.
Digital broadcast setting
Press c/d to select “Terrestrial” or “Cable”,
and then press ;.
Terrestrial
Cable
H
When you set “Sweden” in the country setting and select
“Cable” for the searching format, you can select the
cable provider “ComHem”.
Searching for terrestrial broadcasts
The TV searches for, sorts and stores all the
receivable TV stations according to their
settings and the connected antenna.
To abort the initial auto installation in progress, press 6.
5
E
Quick guide
LC-LE705E_GB.indd 9LC-LE705E_GB.indd 9 2009/10/09 14:12:572009/10/09 14:12:57
10
Quick guide
Searching for cable broadcasts
To change each item to the appropriate
settings:
Press a/b to select the menu, and then
press ;.
Scrambled stations [Yes]
[Channel]
[None]
Search method
Start frequency
Network ID
Symbol rate 1
Symbol rate 2
QAM modulation 1
QAM modulation 2
Reset
Search start
Press a/b/c/d or 0_9 to select or input
the appropriate item/value, and then press
;.
Press a/b to select “Search start”, and then
press ;.
The TV searches for, sorts and stores all
the receivable TV stations according to their
settings and the connected antenna.
To abort the initial auto installation in progress, press 6.
H
The “Scrambled stations” menu and the “Search method”
menu are not displayed on the screen as each menu item is
fixed.
The value of “Start frequency” and “Network ID” should be set
to the value specified by the cable provider.
E
1
2
3
4
Menu Description Selectable items
Scrambled
stations
Specifies if you
need to add pay-TV
services.
Yes, No
Search
method
Specifies how you
search channels.
Channel: Extracts all
of information from a
channel (quick, but
needs corresponding
TV stations).
Frequency: Checks
every frequency in
range (slow).
Start
frequency
From 47.0_858.0
MHz
Network ID
Specifies the network.
Set this to register
only the specified
network ID without
registering any special
services.
None, 0_65535
Symbol
rate 1*
The symbol rates
are specified by the
cable provider. Input
the value received for
CATV.
1000_9000
Symbol
rate 2*
The symbol rates
are specified by the
cable provider. Input
the value received for
CATV.
1000_9000
QAM
modulation 1
16, 32, 64, 128, 256
QAM
modulation 2
None, 16, 32, 64,
128, 256
Set up “Symbol rate 2” if the cable provider uses several
symbol rates.
H
When you set “Sweden” in the country setting and select
“Cable” for the searching format, you can select the cable
provider “ComHem”. Follow the screen prompts.
Analogue broadcast setting
The TV searches for, sorts and stores all the
receivable TV stations according to their
settings and the connected antenna.
To abort the initial auto installation in progress, press 6.
*
LC-LE705E_GB.indd 10LC-LE705E_GB.indd 10 2009/10/09 14:12:582009/10/09 14:12:58
11
Quick guide
Checking signal strength and
channel strength (DVB-T/C)
If you install a DVB-T/C antenna for the first time or
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking the
antenna setup screen.
Go to “MENU” > “Setup” > “Antenna setup-
DIGITAL”.
Checking signal strength
Press a/b to select “Signal strength”, and
then press ;.
Supply voltage
CH no.
Current Max.
Signal strength
Signal strength
Channel strength
Current Max.
Quality
Checking channel strength
Press a/b to select “Channel strength”, and
then press ;.
You can input a specified frequency band using the 0_9
numeric buttons.
E
E
Channel strength of DVB-T
Supply voltage
CH no.
Current Max.
Signal strength
MHz
Signal strength
Channel strength
Current Max.
Quality
Channel strength of DVB-C
Supply voltage
Current
Max.
Signal strength
MHz
Signal strength
Frequency
Symbol rate
QAM modulation
Channel strength
Current Max.
Quality
Position and align the antenna so that
the maximum possible values for “Signal
strength” and “Quality” are obtained.
NOTE
The values of “Signal strength” and “Quality” indicate when to
check the appropriate alignment of the antenna.
4
Inserting the CA card into the CI module
In order to receive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the
CI slot of the TV.
Carefully insert the CI module in
the CI slot with the contact side
forward.
The logo on the CI module must
be facing outward from the rear
of the TV.
1
2
Checking CI module information
Go to “MENU” > “Digital setup” > “CI menu”.
This menu is only available for digital stations.
The content of this menu depends on the provider of the CI module.
Module
General information on CI module displays.
Menu
Adjustment parameters of each CA card displays.
Enquiry
You can input numerical values such as passwords here.
NOTE
Only the LC-32LE705E, LC-32LE705S, LC-40LE705E, LC-40LE705S, LC-46LE705E, LC-46LE705S, LC-32LX705E, LC-40LX705E, LC-
46LX705E, LC-32LU705E, LC-32LU705S, LC-40LU705E, LC-40LU705S, LC-46LU705E and LC-46LU705S models are compatible with
the Common Interface (CI) standard as well as the enhanced security Common Interface Plus (CI+) standard.
It takes about 30 seconds to certify the license key when you insert a CA card into the CI+ compatible CI module for the first time. This
process may fail when there is no antenna input or you have never run “Auto installation”.
The CI+ compatible CI module sometimes upgrades its firmware. You may not receive any TV images before upgrading. You can only use
the power button during upgrading.
The CI+ compatible CI module does not allow you to output any copy protected programmes using monitor out. In this case, the copy
protect icon* is shown in the programme information when P. INFO is pressed.
Protect icon: X
If the TV displays an update confirmation message for the CA card while receiving CI+ compatible broadcasts, follow the screen prompts.
Make sure that the CI module is properly inserted.
*
LC-LE705E_GB.indd 11LC-LE705E_GB.indd 11 2009/10/09 14:12:582009/10/09 14:12:58
19
Controlling HDMI devices using AQUOS LINK
What is AQUOS LINK?
Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate
compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/
recorder) using a single remote control unit.
NOTE
AQUOS LINK-compatible AQUOS AUDIO speaker system and AQUOS recorder are scheduled
to be on sale after the release of this TV.
What you can do with AQUOS LINK
One touch recording (DTV only)
You do not have to search for the remote control unit of your recording device. Press
the REC E or REC STOP H buttons inside the flip cover to start/stop recording
what you see on the recorder.
One touch play
When the TV is in standby mode, it will automatically turn on and play back the
image from the HDMI source.
Single remote control operation
AQUOS LINK automatically recognises connected HDMI devices and you can
control the TV and the devices as if using a universal remote control unit.
Operating title list of external devices
In addition to displaying the TV’s own timer list (Page 14), you can also call up
the external player’s top menu or AQUOS BD player’s/AQUOS recorder’s title list
provided that the devices support AQUOS LINK.
Multiple control of HDMI devices
You can select which HDMI device to operate using the < button.
NOTE
When you use AQUOS LINK, make sure to use a certified HDMI cable.
Point the remote control unit toward the TV, not to the connected HDMI device.
Video noise may occur depending on the type of HDMI cable used. Make sure to use a certified
HDMI cable.
Up to three HDMI recording devices, one AV amplifier and two players can be connected using
this system.
These operations affect the HDMI device selected as the current external source. If the device
does not operate, turn on the device and select the appropriate external source using b.
When you insert/remove HDMI cables or change connections, turn on all connected HDMI
devices before turning on the TV. Confirm that picture and audio are correctly output by
selecting “HDMI 1”, “HDMI 2”, “HDMI 3” or “HDMI 4” from the “INPUT SOURCE” menu.
E
E
AQUOS LINK connection
First connect the AQUOS AUDIO speaker system or an AQUOS BD player/AQUOS recorder that supports the HDMI
CEC protocol.
NOTE
Refer to the operation manual of the device to be connected for further details.
After unplugging connection cables or changing the connection pattern, turn on the power of the TV after all relevant devices’ power
have been turned on. Change the external input source by pressing b, select the appropriate external source and verify the audiovisual
output.
The cables illustrated in the following explanation are commercially available items.
AQUOS LINK
LC-LE705E_GB.indd 19LC-LE705E_GB.indd 19 2009/10/09 14:13:042009/10/09 14:13:04
20
Connecting an AQUOS BD player/AQUOS recorder via
the AQUOS AUDIO speaker system
AQUOS BD player/AQUOS
recorder
AQUOS AUDIO speaker system
HDMI-certified cable
Optical audio cable
Connecting an AQUOS BD
player/AQUOS recorder
only
AQUOS BD player/AQUOS recorder
AQUOS LINK setup
Basic operation
Go to “MENU” > “Option” > “AQUOS LINK
setup” > select the menu you want to set.
AQUOS LINK control
Set to “On” to enable HDMI CEC functions.
Auto power on
If this is activated, the one touch play function is enabled.
While the TV is in standby mode, it automatically turns on
and plays back the image from the HDMI source.
NOTE
The factory default for this item is “Off”.
Selecting recorder
Here, you can select a recorder for the recording from
several connected recorders.
NOTE
If you have connected the AQUOS AUDIO speaker system
between the TV and an AQUOS recorder, the external source’s
indication changes (e.g., from “HDMI 1” to “HDMI 1 (Sub)”).
Selecting channel key
This function allows you to select the channel of the
connected HDMI device using the TV’s remote control
unit.
Press a/b to select the input source of the
connected HDMI device you want to control
using the TV’s remote control unit, and then
press ;.
Press c/d to select “On”, and then press
;.
Using genre info
This function allows you to automatically switch to
the appropriate sound mode depending on the genre
information included the digital broadcast.
1
2
AQUOS LINK
LC-LE705E_GB.indd 20LC-LE705E_GB.indd 20 2009/10/09 14:13:042009/10/09 14:13:04
21
Operating an AQUOS LINK device
AQUOS LINK allows you to operate the HDMI-connected
device with a single remote control unit.
Open the remote control unit’s flip cover.
Press PLAY I to start playback of a title.
See the right column, section Top menu/Title list if you
want to start playback using the list of the titles of the
AQUOS BD player/AQUOS recorder.
Press FWD J to fast forward.
Press REV G to reverse.
Press STOP H to stop.
Press B to turn the HDMI-connected device
on/off.
AQUOS LINK menu
“AQUOS LINK menu” allows you to arrange the settings
for the sound or external devices, etc.
Displaying “AQUOS LINK menu”
Open the remote control unit’s flip cover, and
then press <.
By AQUOS AUDIO SP
You can choose to listen to the TV sound only from the
AQUOS AUDIO speaker system.
Press a/b to select “By AQUOS AUDIO SP”,
and then press ;.
The sound from the TV speaker and headphone terminal
is silenced and only the sound from the AQUOS AUDIO
speaker system is audible.
By AQUOS SP
You can choose to listen to the TV sound only from the
AQUOS TV speaker system.
Press a/b to select “By AQUOS SP”, and
then press ;.
Sound mode change
You can manually change the AQUOS AUDIO speaker
system’s sound mode.
Press a/b to select “Sound mode change”.
The sound mode changes every time you
press ;.
Refer to the operation manual of the AQUOS AUDIO
speaker system for details.
1
2
3
E
1
2
Setup menu
You can call up the menu of an HDMI CEC-compatible
external device (player, recorder, decoder, etc.) using the
“Setup menu” function.
Press a/b to select “Setup menu”, and then
press ;.
NOTE
If a connected device does not have this function or the device
is in a status where the menu cannot be displayed (recording,
entering standby, etc.), this function may not be available.
Top menu/Title list
This section explains how to play back a title in the
AQUOS BD player/AQUOS recorder.
Press a/b to select “Top menu/Title list”,
and then press ;.
The linked recorder now powers on and the TV
automatically selects the appropriate external input
source.
The title list data from the connected AQUOS BD player/
AQUOS recorder displays.
Select the title with a/b/c/d, and then
press PLAY I.
Media change
If your recorder has multiple storage media, select the
media type here.
Press a/b to select “Media change”, and
then press ;.
Select the desired medium, such as DVD
recorder or HDD. The media type changes
every time you press ;.
Model select
If multiple HDMI devices are connected in a daisy chain,
you can specify which device to control here.
Press a/b to select “Model select”, and then
press ;. The HDMI device changes every
time you press ;.
Recorder EPG
You can call up the CEC-compatible recorder’s EPG and
preset timer recordings using the TV’s remote control
unit.
Press a/b to select “Recorder EPG”, and
then press ;.
The external input source switches and the recorder’s
EPG is displayed.
Select the programme to record.
Refer to the operation manual of the recorder for details.
1
2
1
2
1
2
AQUOS LINK
LC-LE705E_GB.indd 21LC-LE705E_GB.indd 21 2009/10/09 14:13:052009/10/09 14:13:05
22
What is the MENU?
You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “MENU”.
The “MENU” enables various settings and adjustments.
Basic operation
Display the MENU
screen
Press @ and the “MENU” screen
displays.
LCFONT embedded
Picture
OPC [Off]
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Advanced
Reset
DYNAMIC
Exit the MENU screen
The operation will exit the “MENU”
screen if you press > before it is
completed.
Select an item
Press a/b/c/d to select/adjust
the desired menu, and adjust the item
to the desired level, and then press
;. Press 6 to return to the previous
“MENU” page.
Selecting in the MENU
Energy save
No signal off
No operation off
[Off]
ECO picture control [On]
[Disable]
[Disable]
Sleep timer
Selecting options
Yes
No
LCFONT
This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read
characters on LCD screens.
NOTE
“MENU” options differ in the selected input modes, but the operating procedures are the same.
Items with 4 cannot be selected for various reasons.
The “MENU” screen will disappear if left unattended for several seconds.
Operation without a remote control unit
This function is useful when there is no remote control unit within your reach.
Press @ and the “MENU” screen displays.
Press :r/s instead of a/b or i+/- instead of c/d to select the item.
Press b to complete the setting.
1
2
3
About the guide display
The guide display at the bottom of the screen shows operations with the
OSD.
The bar above is an operational guide for the remote control unit. The bar will
change in accordance with each menu setting screen.
Select Enter Back End
Menu operation
LC-LE705E_GB.indd 22LC-LE705E_GB.indd 22 2009/10/09 14:13:052009/10/09 14:13:05
23
Picture settings
Picture
OPC [Off]
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Advanced
Reset
DYNAMIC
Picture
OPC
Automatically adjusts the brightness of the screen.
Item
Off
The brightness is fixed at the value set
in “Backlight”.
On
Automatically adjusts.
On:Display
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
NOTE
When set to “On”, the TV senses the surrounding light and
automatically adjusts the backlight brightness. Make sure no
object obstructs the OPC sensor, which could affect its ability
to sense surrounding light.
Picture
Picture adjustments
Adjusts the picture to your preference with the following
picture settings.
Adjustment items
Selectable
items
c (Cursor) d (Cursor)
Backlight
The screen dims The screen brightens
Contrast
For less contrast For more contrast
Brightness
For less brightness For more brightness
Colour
For less colour
intensity
For more colour
intensity
Tint
Skin tones become
purplish
Skin tones become
greenish
Sharpness
For less sharpness For more sharpness
Picture
Advanced
This TV provides various advanced functions for
optimising the picture quality.
C.M.S.-hue
Colour temp.
C.M.S.-saturation
C.M.S.-value
100 Hz
Gamma adjustment
Film mode
Active contrast
DNR
3D-Y/C
Monochrome
Range of OPC
R
Y
G
C
B
M
C.M.S.-hue
This function adjusts the hue of a selected colour using a
six-colour adjustment system.
C.M.S.-saturation
This function increases or decreases the saturation of a
selected colour using a six-colour adjustment system.
C.M.S.-value
This function adjusts the brightness of a selected colour
using a six-colour adjustment system.
Colour temp.
Adjusts the colour temperature to give the best white
image.
Item
High
White with bluish tone.
Mid-High
Intermediate tone between “High” and
“Middle”.
Middle
Natural tone.
Mid-Low
Intermediate tone between “Middle”
and “Low”.
Low
White with reddish tone.
R/G/B Gain (LO),
R/G/B Gain (HI)
Adjusts the white balance by changing
the value of each item.
Basic adjustment
LC-LE705E_GB.indd 23LC-LE705E_GB.indd 23 2009/10/09 14:13:072009/10/09 14:13:07
24
100 Hz
“100 Hz” technology provides superior solutions for
digital display picture quality removing motion blur.
NOTE
This effect is greater on fast moving images.
“100 Hz” will have no effect in the following cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
If images appear blurred, set the “100 Hz” to “Off”.
Film mode
Automatically detects a film-based source (originally
encoded at 24 or 25 frames per second, depending on
the vertical frequency), analyses it and then recreates
each still film frame for high-definition picture quality
(“Advanced (High)”, “Advanced (Low)”, “Standard”, “Off”).
Active contrast
Automatically adjusts the contrast of an image according
to the scene.
Gamma adjustment
Selects the tone difference of the brightness and
darkness of the image according to the type of
programme watched from a maximum of e 2 to a
minimum of f 2.
DNR
“DNR” produces a clearer image (“Off”, “High”, “Middle”,
“Low”, “Auto”).
NOTE
This function may not be available depending on the input
signal type.
3D-Y/C
Provides high quality images with minimal dot crawl and
cross colour noise by detecting changes in the image.
Item
Standard
Normal adjustment.
Fast
Sets the optimum image quality for fast-
moving images.
Slow
Sets the optimum image quality for
slow-moving images.
NOTE
“3D-Y/C” may not operate depending on the input signal type
or when the input signal is noisy.
“3D-Y/C” has even more effect on composite video signals
(CVBS).
Monochrome
For viewing a video in black & white.
Range of OPC
The brightness level range of the OPC sensor’s automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of e 16 and a minimum of f 16.
NOTE
This function is available only when the “OPC” setting is set to
“On” or “On:Display”.
The maximum setting cannot be set to a smaller number than
the minimum setting.
The minimum setting cannot be set to a bigger number than
the maximum setting.
The maximum and minimum settings cannot be set to the
same number.
Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
AV MODE
“AV MODE” gives you several viewing options to choose
from to best match the system environment, which
can vary due to factors like room-brightness, type of
programme watched or the type of image input from
external equipment.
Press #.
Each time you press #, the mode
changes.
You can also switch the mode on the “Picture” and
“Audio” menu screen by pressing #.
Item
STANDARD
For a highly defined image in a normally
bright room.
MOVIE
For viewing a movie in a darkened room.
GAME
For playing of video games.
PC*
For PC.
USER
Allows you to customise settings as
desired. You can set the mode for each
input source.
DYNAMIC (Fixed)
For a clear-cut image emphasising
high contrast for sports viewing (the
“Picture” and “Audio” settings cannot
be adjusted).
DYNAMIC
For a clear-cut image emphasising high
contrast for sports viewing.
AUTO
The TV automatically sets the
appropriate selection from the “AV
MODE” menu depending on the lighting
conditions and the type of programme
watched.
NOTE
The item marked with * is available only when selecting “HDMI
1”, “HDMI 2”, “HDMI 3”, “HDMI 4” or “EXT 4” from the “INPUT
SOURCE” menu.
If you select “AUTO”, some selections in the “AV MODE” menu
may not be automatically set.
1
2
Basic adjustment
LC-LE705E_GB.indd 24LC-LE705E_GB.indd 24 2009/10/09 14:13:072009/10/09 14:13:07
25
Audio settings
Audio
Treble
[Off]
Bass
Balance
Surround
Bass enhancer
Reset
DYNAMIC
L30 R30
Audio
Audio adjustment
You can adjust the sound quality to your preference with
the following settings.
Selectable
items
c (Cursor) d (Cursor)
Treble
For weaker treble For stronger treble
Bass
For weaker bass For stronger bass
Balance
Decrease audio from
the right speaker
Decrease audio from
the left speaker
Audio
Surround
This function allows you to enjoy realistic live sound.
Audio
Bass enhancer
This function allows you to enjoy bass-enhanced sound.
Automatic volume adjustment
Option
Auto volume
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. This function reduces this problem
by equalizing levels.
Emphasising dialogue
Option
Clear voice
This function emphasises speech against background
noise for greater clarity.
Outputting audio only
Option
Audio only
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
Item
Off
Both screen images and audio are
output.
On
Audio is output without a screen image.
Setting audio input
Option
PC audio select
When using the EXT 4 terminal or HDMI 2 terminal, you
must select which terminal uses the AUDIO (R/L) jack for
analogue audio input.
Item
HDMI 2
When connecting devices (including a
PC) with DVI/HDMI cable to the HDMI
2 terminal and inputting analogue audio
signals from the AUDIO (R/L) jack.
EXT 4 (RGB)
When connecting a PC to the EXT 4
terminal, and inputting analogue audio
signals from the AUDIO (R/L) jack.
NOTE
You must set this to “EXT 4 (RGB)” when connecting devices
(including a PC) with an HDMI-certified cable to the HDMI 2
terminal. If “HDMI 2” is set, there will be no sound output.
Basic adjustment
LC-LE705E_GB.indd 25LC-LE705E_GB.indd 25 2009/10/09 14:13:082009/10/09 14:13:08
26
Power save settings
ECO
Energy save [ Standard]
ECO picture control [On]
No signal off [Disable]
No operation off
Sleep timer
[Disable]
ECO
ECO picture control
This function automatically detects the image source and
decreases the power consumption while keeping the
brightness of the image unchanged.
NOTE
This function does not work when “AV MODE” is set to
“DYNAMIC (Fixed)” or “AUTO”.
This function does not work when “Energy save” is set to
“Standard” or “Advanced”.
ECO
Energy save
This function enables you to reduce the backlight
brightness in order to decrease the power consumption
and increase the backlight life span as shown in the
following table.
Item
Standard
Reduces the backlight brightness.
Advanced
Reduces the backlight brightness more
than “Standard”.
Off
The backlight brightness is the same
value of your settings in the selected
“AV MODE”.
NOTE
This function does not work when “AV MODE” is set to
“DYNAMIC (Fixed)”.
“Energy save” status icons
Icon Description
“Energy save” is set to “Standard”.
“Energy save” is set to “Advanced”.
When “Energy save” is set to “Standard” or “Advanced”,
“Energy save” status icons appear in the “Picture” menu
and channel information windows as shown in the
following examples.
E
EXAMPLE
Picture
OPC [Off]
Backlight
Contrast
DYNAMIC
When “OPC” is set to “On” or “On:Display”, an “Energy save”
status icon appears to the left of “OPC” in the “Picture” menu.
When “OPC” is set to “Off”, an “Energy save” status icon
appears to the left of “Backlight” in the “Picture” menu.
EXAMPLE
STEREO
Subtitle
New information
ECO
No signal off
When set to “Enable”, the TV will automatically enter
standby mode if there is no signal input for 15 minutes.
NOTE
Even if a TV programme finishes, this function may not operate
because of interference from other TV stations or other signals.
ECO
No operation off
The TV will automatically enter standby mode if no
operations are performed during the time span you set
(“30 min.” or “3 hr.”).
NOTE
Five minutes before the TV enters standby mode, the remaining
time displays every minute.
ECO
Sleep timer
Allows you to set a time when the TV automatically
enters standby mode.
NOTE
Select “Off” to cancel the sleep timer.
When the time has been set, countdown automatically starts.
Five minutes before the preset of time expires, the remaining
time displays each minute.
Basic adjustment
LC-LE705E_GB.indd 26LC-LE705E_GB.indd 26 2009/10/09 14:13:092009/10/09 14:13:09
27
Channel settings
Auto installation
Setup
Auto installation
The TV automatically detects and stores all available
services in your area. This function also allows you to
perform the channel setting for digital and analogue
individually and reconfigure the settings after the initial
auto installation has been completed.
Press c/d to select “Yes”, and then press
;.
Press a/b/c/d to select the desired
language, and then press ;.
NOTE
PIN input is required when executing “Auto installation”. The
default PIN is “1234”. To change the PIN setting, refer to
Password/Parental lock settings (Page 30). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN (Page 41).
You cannot set the Home/Store setting and the country
setting in “Auto installation” in the “Setup” menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing “Reset” from the “Setup” menu.
The current country setting is displayed on the screen.
Press a/b to select the broadcast standard
you want to search, and then press ;.
Digital search
After selecting the service you want to search,
either “Terrestrial” or “Cable”, refer to Digital
broadcast setting on pages 9_10.
The “Digital search” has a “Reset” function. This function
allows you to reset all setting values.
Analogue search
The TV searches for, sorts and stores all the
receivable TV stations. Refer to Analogue
broadcast setting on page 10.
1
2
3
E
E
Programme setup
Setup
Programme setup
You can reconfigure the DTV service settings
automatically or manually.
Press a/b to select the broadcast standard
you want to reconfigure, and then press ;.
NOTE
PIN input is required when executing “Programme setup”.
The default PIN is “1234”. To change the PIN setting, refer to
Password/Parental lock settings (Page 30). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN (Page 41).
Digital setting
Additional search
Use this menu to add new services automatically after
“Digital search” in the “Auto installation” menu has been
completed.
Manual search
Add new services within a specified frequency band.
Enter the frequency using 0_9 numeric buttons.
You can perform “Manual search” with a service number only
when the five Nordic countries have been selected in the
country setting.
E
E
Basic adjustment
LC-LE705E_GB.indd 27LC-LE705E_GB.indd 27 2009/10/09 14:13:112009/10/09 14:13:11
30
Password/Parental lock settings
Setup
Child lock
Allows you to use a PIN to protect certain settings from
being accidentally changed.
NOTE
PIN input is required when executing “Child lock”. The default
PIN is “1234”. To clear the PIN setting (PIN input will no longer
be needed), refer to CLEARING THE PIN (Page 41).
Change PIN
Register a four-digit password number to use the “Child
lock” function.
Enter the four-digit number as a PIN using
0_9 numeric buttons.
Enter the same four-digit number as in step 1
to confirm.
“The system PIN has been changed successfully”
displays.
NOTE
To view a locked channel, you must enter the PIN (see pages
28 and 29 for locking channels from viewing in DTV and ATV
mode). When you select a locked channel, a PIN prompt
message pops up. Press 6 to display the PIN input window.
Cancel PIN
Allows you to reset your PIN.
NOTE
As a precautionary measure, make a note of your PIN on
the back of this operation manual, cut it out and keep it
in a safe place that children cannot reach.
Parental rating
This function allows DTV services to be restricted. It
prevents children from watching violent or sexual scenes
that may be harmful.
NOTE
“Universal viewing” and “Parental approval pref.” are ratings
used exclusively in France.
Refer to page 47 for details about ratings.
1
2
Other basic adjustments
Option
Key lock
This function allows you to lock the buttons on the TV
or remote control unit in order to prohibit children from
changing the channel or volume.
Item
Off
Unlocks the buttons.
RC control lock
Locks all buttons on the remote control
unit.
Button control lock
Locks the buttons on the TV except the
power switch.
NOTE
You cannot set both “RC control lock” and “Button
control lock” at the same time.
Cancelling the lock
Press @ on the TV and set to “Off” to cancel the
“RC control lock”. Press @ on the remote control
unit and set to “Off” to cancel the “Button control lock”.
Refer to page 22 for menu operation using @ on the TV.
Setup
Quick start
You can reduce the TV’s start-up time after turning on the
power with the remote control unit.
Item
On
The TV quickly starts up from standby.
30 W or more of power consumption is
required during standby.
Off
Power consumption is small during
standby.
Setup
Blue illumination
The LED on the front of the TV is blue when illuminated.
NOTE
The factory default for this item is “On”. Set to “Off” if you do
not want the LED to illuminate.
E
Basic adjustment
LC-LE705E_GB.indd 30LC-LE705E_GB.indd 30 2009/10/09 14:13:132009/10/09 14:13:13
31
Selecting the picture size
Selecting the WSS picture size
automatically
Setup
WSS
The “WSS” allows the TV to switch automatically among
the different picture size.
NOTE
Use “WIDE MODE” if an image does not switch to the
appropriate picture size. When the broadcast signal contains no
“WSS” information, the function will not work even if enabled.
Selecting the WSS picture size
manually
Setup
4:3 mode
The “WSS” signal has 4:3 auto-switching that allows you
to select between “Normal” and “Panorama”.
Item
Normal
Normal range keeping 4:3 or 16:9
aspect ratio.
Panorama
Wide image without side bars.
WSS signal 4:3 screen
4:3 mode “Normal”
4:3 mode
“Panorama”
Selecting the picture size
manually
You can select the picture size. Selectable picture size
varies with the type of signal received.
Item (for SD [Standard-Definition] signals)
Normal
Keeps the original aspect ratio in a full
screen display.
Zoom 14:9
For 14:9 letterbox pictures. A thin side
bar appears on each side, and you may
also see bars on the top and bottom
with some programmes.
Panorama
In this mode, the picture is stretched
toward each side of the screen. The
picture may appear similar to “Full”
depending on broadcast signals.
Full
For 16:9 squeeze pictures.
Cinema 16:9
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
Cinema 14:9
For 14:9 letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
Item (for HD [High-Definition] signals)
Full
Displays with an overscan image. Crops
all sides of screen.
Underscan
Displays with an underscan image
only when receiving a 720p signal.
Displays with the High-Definition image
adjusted optimally. Noise may appear
on the edge of the screen with some
programmes.
Dot by Dot
Displays an image with the same
number of pixels on the screen when
receiving 1080i/1080p signals only.
NOTE
Some items do not appear depending on the type of received
signal.
Press f.
The “WIDE MODE” menu displays.
The menu lists the “WIDE MODE” options selectable for
the type of video signal currently received.
Press f or a/b while the “WIDE MODE”
menu displays on the screen.
As you toggle the options, each is immediately reflected
on the screen. There is no need to press ;.
Basically, if you set “WSS” to “On” in the
“Setup” menu, the optimum “WIDE MODE”
is automatically chosen for every broadcast
or programme played using a VCR or DVD
player/recorder.
NOTE
Even if you select your desired “WIDE MODE” manually, the
TV may automatically switch to the optimum “WIDE MODE”
depending on the signal received when “WSS” is set to “On”.
1
2
Useful viewing functions
LC-LE705E_GB.indd 31LC-LE705E_GB.indd 31 2009/10/09 14:13:142009/10/09 14:13:14
32
Selecting the recording picture
size manually
Digital setup
REC picture size
You can use this menu to set the appropriate picture size
for viewing a 16:9 format TV programme on a 4:3 TV.
Setting to “4:3 TV” Setting to “16:9 TV”
NOTE
This function must be set before recording.
Selecting the HDMI picture size
automatically
Setup
HDMI auto view
This function allows you to automatically change to the
appropriate picture size when viewing an HDMI signal
using the HDMI 1, 2, 3 and 4 terminals.
Adjusting image position
Setup
Position
For adjusting a picture’s horizontal and vertical position.
Item
H-Pos.
Centres the image by moving it to the
left or right.
V-Pos.
Centres the image by moving it up or
down.
NOTE
Adjustments are stored separately for each input source.
Depending on the input signal type or “WIDE MODE” setting, a
position setting may not be available.
This function is not available for DTV broadcasts with MHEG
signals.
Language settings
Setup
Language
You can select an OSD language from the “Setup”
menu. Select from among 23 languages. Refer to the
OSD language column in the specification table for the
selectable languages (Pages 44_45).
Digital setup
Subtitle
Set up to two preferred subtitle languages (including
subtitles for the hearing impaired) to display if subtitles
are available.
Selectable items
1st language
2nd language
For hearing impaired
E
E
E
Switching subtitle languages
Each time you press [ on the remote control unit, the
subtitle switches.
Off 1st language
2nd language
Set “For hearing impaired” to “Yes”
Subtitles for the hearing impaired have priority over each
of the subtitle language settings (e.g., “1st language”,
“2nd language”, etc.).
EXAMPLE
1st language
(For hearing impaired)
1st language
NOTE
Subtitles will not be displayed when the programme does not
contain subtitle information.
Option
Digital audio language
Set up to three preferred multi audio languages to display
if the audio languages are available.
Switching the multi audio languages
Each time you press 2 on the remote control unit, the
audio language switches.
E
E
E
Useful viewing functions
LC-LE705E_GB.indd 32LC-LE705E_GB.indd 32 2009/10/09 14:13:142009/10/09 14:13:14
33
Display settings
Channel display
You can display the channel information by pressing p
on the remote control unit.
DTV mode ATV mode
Audio (ENG) STEREO
Video
Subtitle
New information
STEREO
Subtitle
New information
Four digit numbers (e.g., 0001) are displayed after selecting the
five Nordic countries in the country setting.
Time display in channel information
You can display the time information included in DTV and
teletext broadcasts.
NOTE
Skip step 1 if receiving DTV broadcasts.
Select a TV channel (the time information is
automatically captured).
Press p. The channel display will appear on
the TV.
Press p again within the several seconds
that the channel display is on the screen. Time
information will be shown in the lower-right
corner of the screen for several seconds.
Even when you change the TV channel, you
can display the time information with steps 2
and 3 above.
NOTE
If acquired successfully, the time information will appear in the
upper-right corner of the screen by pressing @.
*
E
1
2
3
4
Time and title display
Option
Time display
Time display
This function allows you to display the clock time in the
lower-right corner of the screen.
Item
On
Displays the clock time.
On (half-hourly)
Displays the clock time in 30-minute
increments.
Off
Hides the clock time.
Time format
You can select the time format (either “24HR” or “AM/
PM”) for the clock time.
Option
Game play time
This function allows you to display the elapsed time on
the screen when “AV MODE” is set to “GAME”.
Item
On
Under connecting a game console to
the TV, the elapsed time is displayed
in 30-minute increments after you start
playing a game.
Off
Hides the time.
NOTE
This menu is not selectable if the input source is “TV” or “USB”.
Option
Programme title display
This function allows you to display programme
information such as the title and airtime by tuning a
channel.
NOTE
This function is available only when the DTV mode is selected.
Useful viewing functions
LC-LE705E_GB.indd 33LC-LE705E_GB.indd 33 2009/10/09 14:13:162009/10/09 14:13:16
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-32LU705S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-32LU705S in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-32LU705S

Sharp LC-32LU705S User Manual - German - 52 pages

Sharp LC-32LU705S User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info