453018
44
Zoom out
Zoom in
Previous page
1/52
Next page
42
Updating your TV via DVB-T
Ensure that your TV software version is always up to
date. From time to time SHARP will make updated TV
base software and DVB software available.
Digital setup
Download setup
Searching for updates*
All countries except UK, Sweden and Italy are set to “No” for
this function.
The TV automatically determines whether a new software
version is available when the TV is in standby mode.
Item
Yes
Automatically searches for new software
updates available when the TV is in
standby mode.
No
Does not search for update information.
Now
Checks if there is new software
immediately.
Downloading the software
You can select the method of update.
If the software is updated, the confirmation
message “New download information has
been detected.” appears.
If the TV receives the update service while in standby
mode, a confirmation message displays after turning on
the power.
Follow the screen prompts.
Item
Yes
Starts downloading immediately. It takes
approximately one hour to update. You
cannot carry out other operations while
downloading.
Cancels the download by pressing
; on the remote control unit when
“Discontinue” is displayed on the screen
during the update.
No
Starts downloading automatically several
minutes after entering standby mode.
NOTE
The TV must remain in standby mode for download. Do not
turn off the power using a on the TV.
Updating the software may take some time.
*
1
2
Information
Message list
When new software is detected, you can confirm the
update information and download the software from
“Message list”.
NOTE
When the TV succeeds at downloading new software, the
message is updated in the “Message list” of the “Information”
menu.
The software update will not be carried out if there is no new
software available at the specified download time.
Information
Receiver report
Display reports regarding failures and changes for timer
settings.
Reset
If complex adjustments are made so that the settings
cannot be restored to normal, you can reset the settings
to the factory preset values.
Setup
Reset
Go to “MENU” > “Setup” > “Reset”.
Press c/d to select “Yes”, and then press
;.
“Now, TV will restart automatically, OK?” displays on the
screen.
Press c/d to select “Yes”, and then press
;.
“Now initialising...” displays on the screen and blinks.
After the reset has completed, the power shuts off and
then comes back on. The screen will have returned to its
original settings.
NOTE
PIN input is required when executing “Reset”. The default
PIN is “1234”. To change the PIN setting, refer to Password/
Parental lock settings (Page 30). To clear the PIN setting (PIN
input will no longer be needed), refer to CLEARING THE PIN
(Page 41).
Identification
Setup
Identification
You can check the TV ID on the screen for reporting to
customer service.
1
2
3
Appendix
LC-LE705E_GB.indd 42LC-LE705E_GB.indd 42 2009/10/09 14:13:242009/10/09 14:13:24
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-32LU705E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-32LU705E in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-32LU705E

Sharp LC-32LU705E User Manual - German - 52 pages

Sharp LC-32LU705E User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info