453008
41
Zoom out
Zoom in
Previous page
1/52
Next page
LC-32LE700E LC-32LE700S
LC-40LE700E LC-40LE700S
LC-46LE700E LC-46LE700S
LC-52LE700E LC-52LE700S
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISEUR COULEUR À ÉCRAN
CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
TELEVISOR DE CRISTAL LÍQUIDO
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
MANUAL DE OPERAÇÃO
SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg
SHARP CORPORATION
http://www.sharp-eu.com
Printed in Poland
Gedruckt in Polen
Imprimé en Pologne
Stampato in Polonia
Gedrukt in Polen
Impreso en Polonia
Impresso na Polónia
TINS-E281WJN1
09P10-PL-NG
PIN
LC-32LE700E/LC-32LE700S/
LC-40LE700E/LC-40LE700S/
LC-46LE700E/LC-46LE700S/
LC-52LE700E/LC-52LE700S
E281WJN1
OPERATION MANUAL/BEDIENUNGSANLEITUNG/MODE D’EMPLOI/MANUALE DI
ISTRUZIONI/GEBRUIKSAANWIJZING/MANUAL DE MANEJO/MANUAL DE OPERAÇÃO
1
LC-32LX700E LC-40LX700E LC-46LX700E
LC-32LU700E LC-32LU700S LC-40LU700E LC-40LU700S LC-46LU700E LC-46LU700S
LC-32LE705E LC-32LE705S LC-40LE705E LC-40LE705S
LC-46LE705E LC-46LE705S LC-52LE705E LC-52LE705S
LC-32LX705E LC-40LX705E LC-46LX705E
LC-32LU705E LC-32LU705S LC-40LU705E LC-40LU705S LC-46LU705E LC-46LU705S
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
ESPAÑOL
PORTUGUÊS
Cover_GB01_LE705E.indd 1Cover_GB01_LE705E.indd 1 2009/10/09 13:54:082009/10/09 13:54:08
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A
fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or
ASA
and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied,
cut off the mains plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and
disposed of in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a
serious electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this product may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.
The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin
plug.
Before replacing the plug cover make sure that:
If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
52
o
/46
o
40
o
/32
o
(
1238.0
)
/
[
1099.0
]
(
1238,0
)
/
[
1099,0
]
(
964.0
)
/
[
767.0
]
(
964,0
)
/
[
767,0
]
470.0
470,0
335.0
335,0
400.0
400,0
400.0
400,0
175.0
175,0
(
1157.0
)
/
[
1023.4
]
(
1157,0
)
/
[
1023,4
]
(
817,0
)
/
[
740,0
]
(
817.0
)
/
[
740.0
]
(
765.0
)
/
[
688.0
]
(
765,0
)
/
[
688,0
]
(
664,0
)
/
[
554,0
]
(
664.0
)
/
[
554.0
]
(
300,0
)
/
[
200,0
]
(
300.0
)
/
[
200.0
]
(
300,0
)
/
[
200,0
]
(
300.0
)
/
[
200.0
]
(
612.0
)
/
[
502.0
]
(
612,0
)
/
[
502,0
]
[
575.6
]
[
575,6
]
(
651,0
)
(
651.0
)
[
415.0
]
[
415,0
]
(
452,0
)
(
452.0
)
[
125.7
]
[
125,7
]
(
125,5
)
(
125.5
)
[
93.2
]
[
93,2
]
(
95,0
)
(
95.0
)
[
77.9
]
[
77,9
]
(
93,0
)
(
93.0
)
[
91.9
]
[
91,9
]
(
93,1
)
(
93.1
)
[
240.0
]
[
240,0
]
(
270,0
)
(
270.0
)
[
390.0
]
[
390,0
]
(
420,0
)
(
420.0
)
(
887.8
)
/
[
700.0
]
(
887,8
)
/
[
700,0
]
[
394.5
]
[
394,5
]
(
500,4
)
(
500.4
)
[
321.0
]
[
321,0
]
(
377,0
)
(
377.0
)
[
135.0
]
[
135,0
]
(
170,0
)
(
170.0
)
( )
52o
[ ]
46o
52o/46o
( )
40o
[ ]
32o
Cover_GB02_LE705E.indd 1Cover_GB02_LE705E.indd 1 2009/10/09 13:54:432009/10/09 13:54:43
1
OPERATION MANUAL
ENGLISH
The illustrations and the OSD in this operation manual are for
explanation purposes and may vary slightly from the actual
operations.
The examples used throughout this manual are based on the
LC-46LE700E model.
LC-32LE700E, LC-32LE700S, LC-32LX700E, LC-32LU700E,
LC-32LU700S, LC-40LE700E, LC-40LE700S, LC-40LX700E,
LC-40LU700E, LC-40LU700S, LC-46LE700E, LC-46LE700S,
LC-46LX700E, LC-46LU700E, LC-46LU700S, LC-52LE700E,
LC-52LE700S, LC-32LE705E, LC-32LE705S, LC-32LX705E,
LC-32LU705E, LC-32LU705S, LC-40LE705E, LC-40LE705S,
LC-40LX705E, LC-40LU705E, LC-40LU705S, LC-46LE705E,
LC-46LE705S, LC-46LX705E, LC-46LU705E, LC-46LU705S,
LC-52LE705E and LC-52LE705S models are compatible with
H.264 (MPEG4 H.264, MPEG4 AVC, MPEG4 AVC/H.264)
compressed broadcasts.
Only the LC-32LE705E, LC-32LE705S, LC-40LE705E, LC-
40LE705S, LC-46LE705E, LC-46LE705S, LC-32LX705E,
LC-40LX705E, LC-46LX705E, LC-32LU705E, LC-32LU705S,
LC-40LU705E, LC-40LU705S, LC-46LU705E and LC-
46LU705S models are compatible with the Common Interface
(CI) standard as well as the enhanced security Common
Interface Plus (CI+) standard.
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour
TV product. To ensure safety and many years of trouble-
free operation of your product, please read Important
safety precautions carefully before using this product.
Trademarks
“HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
The “HD TV 1080p” Logo is a trademark of EICTA.
The DVB logo is the registered trademark of the Digital
Video Broadcasting—DVB—project.
LC_ LCFONT+ and LC logo mark
are registered trademarks of SHARP Corporation. This
product is embedded with LC Font technology, which was
developed by SHARP Corporation for clearly displaying
easy-to-read characters on an LCD screen. However, other
non-LCD fonts are used for displaying some screen pages.
ENGLISH
Introduction ................................................................. 2
Important safety precautions ................................. 2
Remote control unit .............................................. 3
TV (front view) ....................................................... 4
TV (rear view) ........................................................ 4
Preparation.................................................................. 5
Supplied accessories ............................................ 5
Attaching the stand unit ........................................ 5
Inserting the batteries............................................ 6
Using the remote control unit ................................ 6
Quick guide ................................................................. 7
Initial installation overview...................................... 7
Before turning on the power ................................. 8
Initial auto installation ............................................ 9
Inserting the CA card into the CI module ............. 11
Watching TV .............................................................. 12
Daily operation .................................................... 12
EPG .................................................................... 13
Teletext ............................................................... 15
Connecting external devices ................................... 16
Video connections .............................................. 16
Audio connections .............................................. 18
AQUOS LINK ............................................................. 19
Controlling HDMI devices using AQUOS LINK ..... 19
AQUOS LINK connection .................................... 19
AQUOS LINK setup ............................................ 20
Operating an AQUOS LINK device ...................... 21
Menu operation......................................................... 22
What is the MENU? ............................................ 22
Basic adjustment ...................................................... 23
Picture settings ................................................... 23
Audio settings ..................................................... 25
Power save settings ............................................ 26
Channel settings ................................................. 27
Password/Parental lock settings ......................... 30
Other basic adjustments ..................................... 30
Useful viewing functions .......................................... 31
Selecting the picture size .................................... 31
Language settings .............................................. 32
Display settings ................................................... 33
Other useful features ............................................... 34
Setting when using external devices ................... 34
Additional features .............................................. 34
Connecting a USB device ................................... 35
USB Photo viewer/Music player .......................... 35
Connecting a PC ....................................................... 37
Connecting a PC ................................................ 37
Displaying a PC image on the screen .................. 37
RS-232C port specifications ............................... 39
Appendix ................................................................... 41
Troubleshooting .................................................. 41
Updating your TV via DVB-T ............................... 42
Reset .................................................................. 42
Identification ....................................................... 42
Updating your TV via USB .................................. 43
Specifications ..................................................... 44
Environmental specifications ............................... 46
End of life disposal .............................................. 48
LC-LE705E_GB.indd 1LC-LE705E_GB.indd 1 2009/10/09 14:12:482009/10/09 14:12:48
2
Important safety precautions
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use
liquid cleaners or aerosol cleaners.
Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean it.
Chemicals may cause damage or cracks in the cabinet of the TV.
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and
in a wet basement.
Do not place vases or any other water-filled containers on this product. The water may spill onto the product
causing fire or electric shock.
Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product
to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod,
bracket or table recommended by the manufacturer or sold with the product. When mounting the product on
a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the
manufacturer.
When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive
force and uneven floor surface can cause the product to fall from the cart.
Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or block
these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the
product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation
openings. This product is not designed for built-in installation; do not place the product in an enclosed place
such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are
followed.
The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or
impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.
Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-
generating products (including amplifiers).
To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
Headphones—Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
Do not display a still picture for a long time, as this could cause an afterimage to remain.
There is power consumption always if main plug is connected.
Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous
conditions. Request a qualified person to perform servicing.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of blue, green or
red. This is within product specifications and does not constitute a fault.
Precautions when transporting the TV
When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two people holding it with two
hands—one hand on each side of the TV.
Devices connected to the protective earthing of the building installation through the MAINS connection or through other devices with a
connection to protective earthing and to a television distribution system using coaxial cable, may in some circumstances create a fire
hazard. Connection to a television distribution system therefore has to be provided through a device providing electrical isolation within a
certain frequency range (galvanic isolator, see EN 60728-11).
NOTE
For requirements in Norway and Sweden, the requirements for isolation are also relevant for devices that can be connected to
television distribution systems.
Introduction
LC-LE705E_GB.indd 2LC-LE705E_GB.indd 2 2009/10/09 14:12:492009/10/09 14:12:49
3
Remote control unit
B (Standby/On)
(Page 12)
Buttons for useful operations
m (Teletext)
ATV: Display analogue teletext
(Page 15).
DTV: Select MHEG-5 and teletext
for DTV (Page 15).
k (Reveal hidden teletext)
(Page 15)
[ (Subtitle)
Switch subtitle languages on/off
(Pages 15 and 32).
3 (Freeze/Hold)
Press to freeze a moving image on
the screen.
Teletext: Stop updating teletext
pages automatically or release the
hold mode.
1 (Subpage)
(Page 15)
v (Top/Bottom/Full)
Set the area of magnification in
teletext mode (Page 15).
Numeric buttons 0_9
Set the channel.
Enter desired numbers.
Set the page in teletext mode.
When the five Nordic countries
(Sweden, Norway, Finland,
Denmark or Iceland) are selected
in the country setting from “Auto
installation” (page 27), DTV
services are four digits. When
another country is selected, DTV
services are three digits.
A (Flashback)
Press to return to the previously
selected channel or external input.
DTV
Press to access digital TV mode.
ATV
Press to access conventional
analogue TV mode.
2 (Sound mode)
Select a sound multiplex mode
(Page 12).
i+/- (Volume)
Increase/decrease TV volume.
e (Mute)
TV sound on/off.
1
2
3
4
5
6
7
8
9
15
16
17
18
19
20
21
22
23
24
25
4
3
2
5
6
7
8
9
10
11
12
13
14
1
f (WIDE MODE)
Select a wide mode (Pages 31
and 37).
#
Select a video setting (Page 24).
a/b/c/d (Cursor)
Select a desired item on the setting
screen.
;
Execute a command within the
“MENU” screen.
ATV/DTV: Display the programme
list when no other “MENU” screen
is running.
0
Q
W
>
Exit the “MENU” screen.
R/G/Y/B (Colour) buttons
The coloured buttons are
correspondingly used to select the
coloured items on the screen (e.g.,
EPG, MHEG-5, teletext).
b (INPUT SOURCE)
Select an input source (Page 12).
EPG
DTV: Display the EPG screen
(Pages 13_14).
RADIO
DTV: Switch between radio and
data mode.
When only data broadcasting
(no radio broadcasting) is
transmitted by DVB, the radio
broadcasting will be skipped.
P. INFO
Press to display programme
information which is transmitted
through digital video broadcasting in
the upper left corner of the screen
(DTV only).
:r/s
Select the TV channel.
p (Display information)
Press to display the station
information (channel number, signal,
etc.) in the upper right corner of the
screen (Page 33).
ECO (Standard/Advanced/Off)
Select “Energy save” setting (Page
26).
@
“MENU” screen on/off.
6 (Return)
Return to the previous “MENU”
screen.
SLEEP
Press to schedule a time for the TV
to automatically standby (Page 26).
AQUOS LINK buttons
If external equipment such as a
AQUOS BD player is connected via
HDMI cables and is AQUOS LINK
compatible, you can use these
AQUOS LINK buttons. See pages
19 and 21 for details.
E
R
T
Y
U
I
O
P
A
S
D
F
G
Introduction
LC-LE705E_GB.indd 3LC-LE705E_GB.indd 3 2009/10/09 14:12:502009/10/09 14:12:50
4
TV (front view)
2 3 45
6
1
7
8
9
10
Blue illumination LED
B (Standby/On indicator)
OPC indicator
Remote control sensor
OPC sensor
a (Power button)
@ (Menu button)
b (Input source button)
:r/s (Programme [channel]
buttons)
i+/- (Volume buttons)
1
2
3
4
5
6
7
8
9
10
TV (rear view)
1
2
6
8
11
12
14
13
15
16 17 18 19
9
10
3
4
5
7
*1
*2
COMMON INTERFACE slot
USB terminal
HDMI 4 (HDMI) terminal
EXT 9 (VIDEO/AUDIO) terminals
Headphones
AC INPUT terminal
MAIN POWER switch
HDMI 3 (HDMI) terminal
HDMI 1 (HDMI) terminal
EXT 4 (ANALOGUE RGB (PC))
terminal
Antenna terminal
HDMI 2 (HDMI) terminal
HDMI 2/PC AUDIO (R/L) jack
DIGITAL AUDIO OUTPUT
terminal
RS-232C terminal
EXT 3 (COMPONENT/AUDIO)
terminals
EXT 1 (RGB) terminal
EXT 2 (AV) terminal
OUTPUT (AUDIO) terminals
WARNING
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Do not set the volume at a high level.
Hearing experts advise against extended
listening at high volume levels.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
When the MAIN POWER switch is turned off (a), the amount of electric power consumed will be reduced to 0.01 W or less. However,
unlike when unplugging the AC cord, the power is not completely disconnected.
The HDMI 2 and EXT 4 terminals can both use the same audio input terminal (HDMI 2/PC AUDIO (R/L)). However, the proper item must
be selected in the “PC audio select” menu (refer to page 25 for details).
I
J
Introduction
LC-LE705E_GB.indd 4LC-LE705E_GB.indd 4 2009/10/09 14:12:502009/10/09 14:12:50
5
Supplied accessories
Remote control unit ( x 1) AC cord ( x 1) Cable clamp ( x 1) Stand unit ( x 1)
Product shape varies in
some countries.
For 32 inch models
For 40/46/52 inch models
Pages 3 and 6 Page 8 Page 8 Page 5
Operation manual (this publication)
“AAA” size zinc-carbon battery ( x 2) ... Page 6
Attaching the stand unit
Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Confirm that there are eight screws with the
stand unit.
Models Screws
32 inch models
AB
40/46/52 inch models
CD
Attach the supporting post for the stand unit
onto the base using the four screws with the
screw driver as shown.
*
Supporting
post
32 inch models: Use Screws B in the table in step 1.
40/46/52 inch models: Use Screws D in the table in step 1.
1
2
*
*
Inserting the stand.
Insert the stand into the openings on the
bottom of the TV (hold the stand so it will not
drop from the edge of the base area).
Insert and tighten the four screws into the four
holes on the rear of the TV.
1
1
2 2
Soft cushion
32 inch models: Use Screws A in the table in step 1.
40/46/52 inch models: Use Screws C in the table in step 1.
NOTE
To detach the stand unit, perform the steps in reverse order.
A screw driver is not supplied with this product.
The stand base is made of glass. Therefore, be careful not to
drop the stand base or apply pressure to it.
Do not place heavy objects on the stand base.
3
1
2
*
*
Preparation
LC-LE705E_GB.indd 5LC-LE705E_GB.indd 5 2009/10/09 14:12:512009/10/09 14:12:51
6
Inserting the batteries
Before using the TV for the first time, insert two supplied “AAA” size zinc-carbon batteries. When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Open the battery cover.
Insert two supplied “AAA” size zinc-carbon
batteries.
Place batteries with their terminals corresponding to the (e)
and (f) indications in the battery compartment.
Close the battery cover.
1
2
3
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Do not mix batteries of different types. Different types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old
batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical leakage,
wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
When replacing the batteries, use zinc-carbon batteries instead of alkaline ones.
Note on disposing batteries
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household rubbish.
Deposit any used batteries free of charge into the designated collection containers set up at commercial businesses.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control unit
and sensor may prevent proper operation.
5 m
Remote control sensor
Cautions regarding the remote control unit
Do not expose the remote control unit to shock. In addition, do not expose the remote
control unit to liquids, and do not place in an area with high humidity.
Do not install or place the remote control unit under direct sunlight. The heat may cause
deformation of the unit.
The remote control unit may not work properly if the remote control sensor of the TV is
under direct sunlight or strong lighting. In such cases, change the angle of the lighting or
the TV, or operate the remote control unit closer to the remote control sensor.
Preparation
LC-LE705E_GB.indd 6LC-LE705E_GB.indd 6 2009/10/09 14:12:532009/10/09 14:12:53
7
Initial installation overview
Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending
on your TV installation and connection.
Preparation
Connect an antenna cable to the
antenna terminal (Page 8).
If necessary, insert a CA
card into the CI slot to watch
scrambled broadcasts (Page 11).
Connect the AC cord to the TV
(Page 8).
Product shape varies in some
countries.
Run the
initial
settings
Turn on (;) the MAIN POWER
switch on the left side of the TV
(Page 4).
The factory default for the MAIN
POWER switch is set to on (;).
Turn on the power using a on
the TV (Page 12).
Run the initial auto installation
(Page 9).
Language setting
Home/Store setting
HOME
STORE
Country setting
Austria
Finland
Greece
Channel search
setting
Digital search
Analogue search
Start searching
channels
Watch TV
Congratulations!
Now you can watch TV.
If necessary, adjust the antenna
to attain maximum signal
reception (Page 11).
Connect external
devices
Connect external devices
such as a DVD player/
recorder as instructed (Pages
16_18).
Connect external audio
devices such as speakers/
amplifier as instructed (Page
18).
Quick guide
LC-LE705E_GB.indd 7LC-LE705E_GB.indd 7 2009/10/09 14:12:542009/10/09 14:12:54
8
Before turning on the power
2
*
1
Cable clamp (bundle the cables with the clamp)
Standard DIN45325 plug (IEC 169-2) 75 q coaxial cable
Turn on (;) the MAIN POWER switch on the left side of the TV.
AC cord (product shape varies in some countries)
The AC cord is supplied either with a ferrite core or without a ferrite core. Neither type
causes unnecessary electrical wave emissions or interference.
*
Place the TV close to the AC outlet,
and keep the power plug within
reach.
Supplying power to the antenna
You must supply power to the antenna in order to receive digitally/terrestrially broadcast stations after connecting
the antenna cable to the antenna terminal on the rear of the TV.
Press @ and the “MENU” screen displays.
Press c/d to select “Setup”.
Press a/b to select “Antenna setup-DIGITAL”, and then press ;.
Press a/b to select “Supply voltage”, and then press ;.
Press c/d to select “On”, and then press ;.
1
2
3
4
5
Mounting the TV on a wall
This TV should be mounted on a wall only with the wall mount bracket and attachment* available from SHARP (Page 46).
The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that
results in accident or injury.
You can ask qualified service personnel about using an optional bracket and attachment* to mount the TV to a wall.
When you mount the TV on a wall, you should attach the supporting post.
Only for 40 inch models.
*
Quick guide
LC-LE705E_GB.indd 8LC-LE705E_GB.indd 8 2009/10/09 14:12:572009/10/09 14:12:57
39
RS-232C port specifications
PC control of the TV
When a programme is set, the TV can be controlled
from the PC using the RS-232C terminal. The input
signal (PC/video) can be selected, the volume can be
adjusted and various other adjustments and settings
can be made, enabling automatic programmed
playing.
Use an RS-232C serial control cable (cross type)
(commercially available) for the connections.
NOTE
This operation system should be used by a person
who is accustomed to using PCs.
RS-232C serial control cable (cross type)
Communication conditions
Set the RS-232C communications settings on the PC
to match the TV’s communications conditions. The TV’s
communications settings are as follows:
Baud rate
9,600 bps
Data length
8 bits
Parity bit
None
Stop bit
1 bit
Flow control
None
Communication procedure
Send the control commands from the PC via the RS-
232C connector.
The TV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time. Wait
until the PC receives the OK response before sending the
next command.
Make sure to send “A” with the carriage return and
confirm that “ERR” returns before operating.
Command format
Eight ASCII codes +CR

C1 C2 C3 C4 P1 P2 P3 P4
Command four digits: Command. The text of four
characters.
Parameter four digits: Parameter 0_9, blank, ?,
minus
Return code (0DH): ?
Parameter
Input the parameter values, aligning left, and fill with
blank(s) for the remainder (be sure that four values are
input for the parameter).
When the input parameter is not within an adjustable
range, “ERR” returns (refer to “Response code format”).
0055
100
0009
0
When “?” is input for some commands, the present
setting value responds.
????
Response code format
Normal response
OK
Return code (0DH)
Problem response (communication error or incorrect
command)
ERR
Return code (0DH)
Connecting a PC
LC-LE705E_GB.indd 39LC-LE705E_GB.indd 39 2009/10/09 14:13:212009/10/09 14:13:21
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-32LE705S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-32LE705S in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-32LE705S

Sharp LC-32LE705S User Manual - German - 52 pages

Sharp LC-32LE705S User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info