142763
13
Zoom out
Zoom in
Previous page
1/71
Next page
12
TV kijken
Beeldscherm
AVC-systeem
Uit
Knippert rood
Rood
Groen
Statusindicator voor Beeldscherm
De stroom is uitgeschakeld.
Het AVC-systeem is niet ingeschakeld of het netsnoer van het AVC-systeem is niet aangesloten.
Het systeem staat in de ruststand (standby).
Het systeem is ingeschakeld.
Statusindicator voor AVC-Systeem
De stroom is uitgeschakeld.
Alleen het AVC-systeem staat in de ruststand (standby) of het volledige systeem staat in de ruststand (standby).
Het systeem is ingeschakeld.
Spanningsindicator
Inschakelen van de stroom
1 Druk op MAIN POWER van het beeldscherm.
De spanningsindicator van het beeldscherm gaat rood
knipperen.
2 Druk op POWER van het AVC-systeem.
Het systeem wordt ingeschakeld.
De spanningsindicators van het beeldscherm en het AVC-
systeem lichten groen op.
Als de spanningsindicators nog steeds rood oplichten, drukt
u op B van de afstandsbediening of op de spanningstoets
van het beeldscherm om het systeem in te schakelen.
Wanneer het AVC-systeem het eerst wordt ingeschakeld
1 Druk op POWER van het AVC-systeem.
De spanningsindicator van het AVC-systeem licht rood op.
2 Druk op MAIN POWER van het beeldscherm.
Het systeem wordt ingeschakeld.
De spanningsindicators van het beeldscherm en het AVC-
systeem lichten groen op.
Als de spanningsindicators nog steeds rood oplichten, drukt
u op B van de afstandsbediening of op de spanningstoets
van het beeldscherm om het systeem in te schakelen.
F
De benaming systeem in de tekst verwijst naar het beeldscherm en het
AVC-systeem.
De automatische installatie bij eerste gebruik start wanneer het systeem
de eerste maal wordt ingeschakeld. Als het systeem reeds ingeschakeld
is geweest, zal de automatische installatie bij eerste gebruik niet
geactiveerd worden. Zie blz. 21 om de automatische installatie vanaf het
instellingenmenu te activeren.
Uitschakelen van de stroom
1 Druk op B van de afstandsbediening of druk op de
spanningstoets van het beeldscherm.
Het systeem komt in de ruststand (standby) te staan en het
beeld verdwijnt.
Beide spanningsindicators veranderen van groen naar rood.
2 Druk op POWER van het AVC-systeem.
De spanningsindicator van het AVC-systeem gaat uit en de
spanningsindicator van het beeldscherm knippert rood.
3 Druk op MAIN POWER van het beeldscherm.
De spanningsindicator van het beeldscherm gaat na ongeveer
5 seconden uit.
F
Trek de stekker uit het stopcontact als u de apparatuur langere tijd niet
denkt te gebruiken.
Uit
Rood
Groen
Spanningsindicator
Aan/uit-toets (POWER)
Hoofdstroomvoorziening
(MAIN POWER)
Spanningstoets (B)
LC-30HV2E(NL)-b 02.3.25, 1:48 PM12
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp lc 30hv2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp lc 30hv2 in the language / languages: Dutch as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info