141769
34
Zoom out
Zoom in
Previous page
1/40
Next page
Appendix
Troubleshooting
Problem Possible Solution
• No power.
Check if you pressed B on the remote control unit. (See page 8.)
If the indicator on the TV lights up red, press B.
Is the AC cord disconnected? (See page 4.)
Check if you pressed a on the TV. (See page 8.)
Unit cannot be operated. External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after first turning the power off, or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
Remote control unit does not
operate.
Are batteries inserted with polarity (e, f) aligned? (See page 5.)
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminated to remote control sensor?
Picture is cut off. Is the image position correct? (See page 18.)
Are screen mode adjustments (4:3 Mode/WSS) such as picture size made
correctly? (See pages 18 and 20.)
Strange colour, light colour, or
dark, or colour misalignment.
Adjust the picture tone. (See pages 13 and 14.)
Is the room too bright? The picture may look dark in a room that is too bright.
Check the colour system setting. (See pages 16 and 19.)
Check the HDMI Setup setting. (See page 19.)
Power is suddenly turned off. The unit’s internal temperature has increased.
Remove any objects blocking vent or clean.
Check the power control setting. (See page 15.)
Is sleep timer set? Press SLEEP on the remote control unit until it sets to Off.
No picture. Is connection to other components correct? (See pages 9 and 10.)
Is input signal type selected correctly after connection? (See page 19.)
Is the correct input source selected? (See page 9.)
Is non-compatible signal being input? (See page 33.)
Is picture adjustment correct? (See pages 13 and 14.)
Is the antenna connected properly? (See page 4.)
Is “On” selected in “Audio Only”? (See page 18.)
No sound. Is the volume too low? (See pages 6 and 7.)
Make sure that headphones are not connected. (See page 7.)
Check if you pressed e on the remote control unit. (See page 6.)
The DTV menu screen is displayed
in monochrome and hard to select
the item.
Check if “Monochrome” is set to “On”. If so, set it to “Off”. (See page 14.)
The TV sometimes makes a
cracking sound.
This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to change in temperature. This does not affect the TV’s
performance.
Cautions regarding use in high and low temperature environments
When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: l20°C to e60°C.
IMPORTANT NOTE ON RESETTING THE PIN
We suggest that you remove the following instruction from the operation manual to prevent children from
reading it. As this operation manual is multilingual, we also suggest the same with each language. Keep it in a
safe space for future reference.
Repeat steps 1 to 3 in Changing the PIN. (See page 17.)
Enter “3001” to cancel out the current PIN.
The PIN resets to the factory preset “1234”.
1
2
32
LC-26D44E-gb.indd 32LC-26D44E-gb.indd 32 2008/02/19 10:21:512008/02/19 10:21:51
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp lc 26d44e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp lc 26d44e in the language / languages: English as an attachment in your email.

The manual is 8,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info