Manual Sharp lc 26 sv 1 (page 23 of 28) (English)

142761

Zoom out

Zoom in

1/28

• Check if you pressed B on the remote control unit. (See page 7.)

If the indicator on the TV lights up red, press B.

• Is the AC cord disconnected? (See page 3.)

• Check if you pressed a on the TV. (See page 7.)

• External influences such as lightning, static electricity, etc., may cause improper

operation. In this case, operate the unit after first turning the power off, or

unplugging the AC cord and re-plugging it in after 1 or 2 minutes.

• Are batteries inserted with polarity (e, f) aligned? (See page 4.)

• Are batteries worn out? (Replace with new batteries.)

• Are you using it under strong or fluorescent lighting?

• Is a fluorescent light illuminated to remote control sensor?

• Is the image position correct? (See page 17.)

• Are screen mode adjustments (4:3 Mode/WSS) such as picture size made

correctly? (See pages 17 and 19.)

• Adjust the picture tone. (See pages 12 and 13.)

• Is the room too bright? The picture may look dark in a room that is too bright.

• Check the colour system setting. (See pages 15 and 18.)

• Check the HDMI Setup setting. (See page 18.)

• The unit’s internal temperature has increased.

Remove any objects blocking vent or clean.

• Check the power control setting. (See page 14.)

• Is sleep timer set? Press SLEEP on the remote control unit until it sets to Off.

• Is connection to other components correct? (See page 8 and 9.)

• Is input signal type selected correctly after connection? (See page 18.)

• Is the correct input source selected? (See page 8.)

• Is non-compatible signal being input? (See page 23.)

• Is picture adjustment correct? (See pages 12 and 13.)

• Is the antenna connected properly? (See page 3.)

• Is “On” selected in “Audio Only”? (See page 17.)

• Is the volume too low? (See pages 5 and 6.)

• Make sure that headphones are not connected. (See page 6.)

• Check if you pressed e on the remote control unit. (See page 5.)

Troubleshooting

Appendix

IMPORTANT NOTE ON RESETTING THE PIN

We suggest that you remove the following instruction from the operation manual to prevent children from

reading it. As this operation manual is multilingual, we also suggest the same with each language. Keep it in

a safe space for future reference.

Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly

delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near

a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.

Storage temperature: –20°C to e60°C.

1 Repeat steps 1 to 3 in Changing the PIN. (See page 16.)

2 Enter “3001” to cancel out the current PIN.

• The PIN resets to the factory preset “1234”.

Problem Possible Solution

• No power.

• Unit cannot be operated.

• Remote control unit does not

operate.

• Picture is cut off.

• Strange colour, light colour, or

dark, or colour misalignment.

• Power is suddenly turned off.

• No picture.

• No sound.

LC-32SA1E_GB_c 06.7.25, 11:36 AM21

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp lc 26 sv 1 in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp lc 26 sv 1 Manual

Product: