Manual Sharp LC-22SV2U Operation Manual (page 7 of 49) (English, French, Portuguese, Spanish)

13295

Zoom out

Zoom in

1/49

LC-22SV2U

LIQUID CRYSTAL TELEVISION

OPERATION MANUAL

ENGLISH

IMPORTANT INFORMATION

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrow-

head symbol, within an equilat-

eral triangle, is intended to alert

the user to the presence of

uninsulated “dangerous voltage”

within the product’s enclosure

that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within a

triangle is intended to alert the

user to the presence of impor-

tant operating and maintenance

(servicing) instructions in the

literature accompanying the

product.

IMPORTANT:

To aid reporting in case of loss or theft, please

record the TV’s model and serial numbers in the

space provided. The numbers are located at the

rear of the TV.

U.S.A. ONLY

Model No.:

Serial No.:

IMPORTANT INFORMATION (Continued)

WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment

not expressly approved by the manufacturer could void the user’s authority to operate this equipment.

“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40

of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable

ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

U.S.A. ONLY

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury.

Disposal of these materials may be regulated due to environmental considerations. For disposal or

recycling information, please contact your local authorities or the Electronic Industries Alliance:

www.eia.org

■ The LCD panel is a very high technology product with 1,229,760 thin film transistors, giving you

fine picture details.

Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.

Please note that this does not affect the performance of your product.

IMPORTANT SAFETY PRECAUTIONS (Continued)

■ Cleaning—Unplug the power cord from the AC outlet before

cleaning the product. Use a damp cloth to clean the product.

Do not use liquid cleaners or aerosol cleaners.

■ Water and moisture—Do not use the product near water,

such as bathtub, washbasin, kitchen sink and laundry tub,

swimming pool and in a wet basement.

■ Stand—Do not place the product on an unstable cart, stand,

tripod or table. Placing the product on an unstable base can

cause the product to fall, resulting in serious personal

injuries as well as damage to the product. Use only a cart,

stand, tripod, bracket or table recommended by the manu-

facturer or sold with the product. When mounting the product

on a wall, be sure to follow the manufacturer’s instructions.

Use only the mounting hardware recommended by the

manufacturer.

■ When relocating the product placed on a cart, it must be

moved with utmost care. Sudden stops, excessive force and

uneven floor surface can cause the product to fall from the

cart.

■ Ventilation—The vents and other openings in the cabinet are

designed for ventilation. Do not cover or block these vents

and openings since insufficient ventilation can cause over-

heating and/or shorten the life of the product. Do not place

the product on a bed, sofa, rug or other similar surface,

since they can block ventilation openings. This product is not

designed for built-in installation; do not place the product in

an enclosed place such as a bookcase or rack, unless

proper ventilation is provided or the manufacturer’s instruc-

tions are followed.

■ The LCD panel used in this product is made of glass.

Therefore, it can break when the product is dropped or

applied with impact. Be careful not to be injured by broken

glass pieces in case the LCD panel breaks.

■ Heat sources—Keep the product away from heat sources

such as radiators, heaters, stoves and other heat-generating

products (including amplifiers).

IMPORTANT SAFETY PRECAUTIONS (Continued)

■ If an outside antenna is connected to the television equipment, be sure the antenna system is

grounded so as to provide some protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code provides information with respect to proper grounding

of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of antenna-discharge unit, connection to grounding elec-

trodes, and requirements for the grounding electrode.

■ An outside antenna system should not be located in the

vicinity of overhead power lines or other electric light or

power circuits, or where it can fall into such power lines or

circuits. When installing an outside antenna system, extreme

care should be taken to keep from touching such power

lines or circuits as contact with them might be fatal.

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(

NEC ART 250, PART H

)

ELECTRIC

SERVICE

EQUIPMENT

NEC—NATIONAL ELECTRICAL CODE

GROUND

CLAMP

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

■ For added protection for this television equipment during a

lightning storm, or when it is left unattended and unused for

long period of time, unplug it from the wall outlet and

disconnect the antenna. This will prevent damage to the

equipment due to lightning and power-line surges.

CONTENTS

Page

IMPORTANT INFORMATION ....................................................................................................... 1, 2

DEAR SHARP CUSTOMER .............................................................................................................3

IMPORTANT SAFETY PRECAUTIONS ....................................................................................... 3-5

CONTENTS ....................................................................................................................................... 6

SUPPLIED ACCESSORIES ............................................................................................................. 7

PREPARATION ............................................................................................................................8-10

Using the Remote Control ......................................................................................................... 8

Batteries for the Remote Control .............................................................................................. 8

Antenna Connection .............................................................................................................9, 10

Power Connection .................................................................................................................... 10

DISPLAY AND CONTROL OVERVIEW .................................................................................. 11-13

Removing the Back Cover ....................................................................................................... 13

Listening with Headphones ..................................................................................................... 13

EZ SETUP ....................................................................................................................................... 14

EZ SETUP during the First Power On .................................................................................... 14

REMOTE CONTROL ...................................................................................................................... 15

BASIC OPERATION ................................................................................................................. 15-18

Turning on POWER................................................................................................................... 16

Switching TV/VIDEO [AV1/AV2/COMPONENT/TV] Modes ................................................... 16

Sound Volume ........................................................................................................................... 17

Standby ...................................................................................................................................... 17

Changing Channels .................................................................................................................. 18

SELECTING MENU ITEMS ............................................................................................................19

Selecting Menu Items .............................................................................................................. 19

ADJUSTMENTS ........................................................................................................................ 20-38

Adjusting VIEW MODE Settings .............................................................................................. 20

Moving the Picture on the Screen .......................................................................................... 21

Adjusting SLEEP TIMER Settings ........................................................................................... 22

Adjusting BRIGHTNESS Settings ........................................................................................... 23

Adjusting PICTURE FLIP Settings .......................................................................................... 24

Adjusting LANGUAGE Settings .............................................................................................. 25

Adjusting VIDEO ADJUST Settings ..................................................................................26, 27

Adjusting PRESET Settings .................................................................................................... 28

SET UP .................................................................................................................................29, 30

Adjusting BLUE SCREEN Settings ......................................................................................... 31

Adjusting CLOSED CAPTION Settings .................................................................................. 32

Adjusting V-CHIP Settings ..................................................................................................33-38

CONNECTING EXTERNAL DEVICES ..................................................................................... 39-41

Bundling Cables with Clamps ................................................................................................ 41

TROUBLESHOOTING ..............................................................................................................42, 43

SPECIFICATIONS........................................................................................................................... 44

DIMENSIONAL DRAWINGS .......................................................................................................... 45

CALLING FOR SERVICE ............................................................................................................... 46

LIMITED WARRANTY ..............................................................................................................46, 47

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-22SV2U Operation Manual in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 5,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp LC-22SV2U Operation Manual Manual

Product: