528145
19
Zoom out
Zoom in
Previous page
1/40
Next page
TV menu
AV Input (Only shown in AV mode)
It is possible to manually adjust various settings for
connections with external devices. Select the
appropriate signal type for the signals from the video
equipment connected the AV1 or AV2 (
26” 32”
).
Press
1. TV MENU on your remote control and
select
AV input.
Press
2. OK or to enter AV input.
Press
3. / to select AV1 Input or AV2 Input.
Press
4. / to select the desired signal type.
Auto:
Factory setting, normally OK.
RGB (only for AV1 input):
When RGB is input.
CVBS:
When Composite is input.
S-Video:
When S-Video is input.
Use subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcasted via teletext or DVB-T digital
broadcasts. With digital broadcasts, you have the
additional option of selecting a preferred subtitle
language.
E
Set analogue subtitles
Press
1. TV MENU on the remote control and
select
Subtitle.
Press
2. OK or to enter Subtitle.
Select
3. Analog Subtitle.
Press
4. / to select On to display subtitle
always. Select Off to close subtitles.
Follow the on-screen instructions to exit.
5.
E
Select a subtitle language on digital TV
channels
When you select a subtitle language on a digital TV
channel as described below, the preferred subtitle
language set in the TV menu is temporarily overruled.
Press
1. TV MENU on the remote control and
select
Subtitle.
Press
2. OK or to enter Subtitle.
Press
3. / to select Digital Subtitle Language
or Digital Subtitle Language 2nd.
Highlight your selection and press
4. / to
select a subtitle language.
Follow the on-screen instructions to exit.
5.
NOTE
If your selected subtitle language is not broadcasted, the
default language subtitle will be displayed.
If the Digital Subtitle Language you selected is not
available, the Digital Subtitle Language 2nd will be
displayed.
E
Select Hearing impaired subtitle
When watching channels with hearing impaired
services, you can enable the subtitle commentary for
hearing impaired. For digital channels only.
Press
1. TV MENU on the remote control and
select
Subtitle.
Press
2. OK or to enter Subtitle.
Press
3. / to select Hearing Impaired.
Press
4. / to select On or Off as your subtitle
type.
Follow the on-screen instructions to exit.
5.
Auto 4 : 3 Mode
This option selects the default way that a 4:3 signal
is shown - either as normal “4:3” or expanded in the
“16:9” mode, according to your preferences.
Press
1. TV MENU on the remote control and
select
4 : 3 Mode.
Press
2. / to select 4 : 3 or 16 : 9.
Follow the on-screen instructions to exit.
3.
Manual OAD Download
Ensure that your TV software version is always up to
date.
Press
1. TV MENU on the remote control and
select
Manual OAD Download.
Press
2. OK or to enter. The TV checks all
carriers if there is a new software available for
upgrade.
Press
3. / to select Accept or Remind me
Later, then press OK.
Accept: Starts downloading immediately. It
takes approximately 30 minutes to update.
You cannot carry out other operations while
downloading.
Remind me Later: Each time you turn on
the unit, a message tells you to update the
software.
Follow the on-screen instructions to exit.4.
NOTE
If upgrade via Over Air Download is NOT available at
the time: A message tells you that there is no software
available to be download.
19
54B0101C_English.indd 1954B0101C_English.indd 19 5/22/2010 09:57:095/22/2010 09:57:09
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-22DV200E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-22DV200E in the language / languages: English as an attachment in your email.

The manual is 6,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info