528145
15
Zoom out
Zoom in
Previous page
1/40
Next page
TV menu
E
Step 3: Automatic installation
Your TV searches and stores all available digital and
analogue TV channels as well as all available digital
radio channels.
Press
1. TV MENU on the remote control and
select
Channel Set Up. Then press OK
or
.
NOTE
You are prompted to enter current password to enter
Channel Set Up if Channel Block in the Parental
menu is not the default setting.
Select 2. Auto Scan Start and press OK or
to start channel installation. The installation
may take a few minutes.
When complete, follow the on-screen
3.
instructions to exit.
Update Scan
Update Scan has similar function with Auto Scan.
The difference is you could update channel list without
erasing the original information.
Press
1. TV MENU on the remote control and
select
Channel Set Up. Then press OK
or
.
NOTE
You are prompted to enter current password to enter
Channel Set Up if Channel Block in the Parental
menu is not the default setting.
Press 2. / to select Update Scan Start
and press OK or
to start channel update.
When complete, follow the on-screen
3.
instructions to exit.
Manual Scan
If using digital broadcasts, you can add new services
and check the quality and signal strength of digital
channels. This allows you to reposition and test your
antenna or satellite dish.
Press
1. TV MENU on the remote control and
select
Channel Set Up. Then press OK
or
.
NOTE
You are prompted to enter current password to enter
Channel Set Up if Channel Block in the Parental
menu is not the default setting.
Press 2. / to select Manual Scan and press
OK or
to enter.
Highlight the
3. RF Channel box, and press /
to select a channel number you preferred to
scan.
Press
4. OK to start scanning.
Picture
Option
Lock
RF Channel
Signal Strength
Signal Quality
100
100
6
Status: Scan Complete
Digital Channels: 7
100%
When the scan is completed, the result of 5.
Signal Strength and Signal Quality appear on
the screen. The scanned channel is added in
the channel list.
Follow the on-screen instructions to exit.
6.
NOTE
You can also check Signal Strength and Signal
Quality in Signal Status menu.
If the signal quality and strength is poor, reposition
the antenna or satellite dish and retest.
If you have further problems with the reception of
your digital broadcast, contact a specialised installer.
Channel Skip
Channel skip allows you to skip one or more channels
when pressing P <> on the remote control to switch
between channels.
Press
1. TV MENU on the remote control and
select
Channel Set Up. Then press OK
or
.
NOTE
You are prompted to enter current password to enter
Channel Set Up if Channel Block in the Parental
menu is not the default setting.
Press 2. / to select Channel Skip and press
OK or
to enter the channel list.
Press
3. / to select one or more channels you
preferred to skip.
Press
4. OK to mark or cancel.
Follow the on-screen instructions to exit.
5.
NOTE
To watch the skipped channels, enter the channel
numbers by using the digit buttons on the remote
control or select from channel list.
If you perform Auto Scan, your stored settings will be
erased and you will have to perform this operation again.
15
54B0101C_English.indd 1554B0101C_English.indd 15 5/22/2010 09:57:065/22/2010 09:57:06
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-22DV200E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-22DV200E in the language / languages: English as an attachment in your email.

The manual is 6,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info