572521
22
Zoom out
Zoom in
Previous page
1/35
Next page
21
Useful Features (Continued)
Backlight
You can make the setting for the brightness of the screen.
Press MENU to display the Menu screen.
Press \/| to select “Features”.
Press '/" to select “Backlight”, and press OK.
Press '/" to select the desired mode, and press OK.
Press END to exit.
* The Backlight setting can be switched with one touch using the remote
control (see below).
Directly setting the Backlight
You can change the setting of Backlight directly.
Press BACKLIGHT to select the desired mode.
Each time you press BACKLIGHT, the mode changes as follows.
Backlight:Bright
Backlight:Medium
Backlight:Auto(OPC)
Backlight:Dark
NOTE
See the table above for details of the each brightness setting.
When set to “Auto (OPC)”, make sure that no object obstructs the
OPC sensor, which could affect its ability to sense surrounding light.
Sleep Timer
You can set “Sleep timer” to automatically turn off the LCD
TV set.
Perform steps 1 and 2 in Backlight to display the
Features Menu screen.
Press ' /" to select “Sleep timer”, and press OK.
Press Channel Select or
'/"
to select the time, and
press
\/|
. Press
'/"
to set “On”.
HH:MM On
: :
0 0 0 0 0 0
Press END to exit.
NOTE
Be sure to adjust the clock with “Clock setup” in the Setup Menu
before setting “Sleep timer”.
The time is automatically set/corrected via the Teletext broadcast
when available.
When not using the LCD TV set for a long period of time, turn off
the main power.
Auto Power Off
You can set the power to automatically turn off if there is no
signal for 5 minutes.
Perform steps 1 and 2 in Backlight to display the
Features Menu screen.
Press '/" to select “Auto power off”, and press OK.
Press ' /" to select “On”, and press OK.
On
Off
Press END to exit.
NOTE
“Off” is factory preset value.
1
Description
The LCD TV set automatically
turns off.
Input value/Choice
HH:MM
Off On
Selected item
Sleep timer
Current Time
Choice
[Medium] Suitable for viewing in
well-lit areas. Saves
energy.
[Dark]
Sufficiently bright when
viewing in dim areas.
[Auto (OPC)] Screen brightness is
adjusted according to the
ambient light of the room.
Factory setting
[Bright] Maximum
brightness
Selected item
Backlight*
1
2
3
4
5
1
2
3
4
1
2
3
4
LC-13_15_20SH1E_E_P19-24.p65 2004.12.20, 6:30 PM21
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-20SH1E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-20SH1E in the language / languages: English as an attachment in your email.

The manual is 3,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC-20SH1E

Sharp LC-20SH1E User Manual - German - 35 pages

Sharp LC-20SH1E User Manual - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info