143571
18
Zoom out
Zoom in
Previous page
1/24
Next page
16
9 pin D-sub/MINI-DIN
conversion cable
(optional: AN-A1RS)
RS-232C serial control cable
(cross type, commercially available)
Communication conditions
Set the RS-232C communications settings on the PC to match the
TV’s communications conditions.
The TV’s communications settings are as follows:
Baud rate: 9,600 bps
Data length: 8 bits
Parity bit: None
Stop bit: 1 bit
Flow control: None
Communication procedure
Send the control commands from the PC via the RS-232C connector.
The TV operates according to the received command and sends a
response message to the PC.
Do not send multiple commands at the same time. Wait until the PC
receives the OK response before sending the next command.
Command format
Eight ASCII codes + CR
C1 C2 C3 C4 P1 P2 P3 P4
Command 4-digits Parameter 4-digits Return code
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0 9, ×, blank, ?
Parameter
Input the parameter values, aligning left, and fill with
blank(s) for the remainder. (Be sure that four values
are input for the parameter.)
When the input parameter is not within an
adjustable range, “ERR” returns. (Refer to
“Response code format”.)
When “?” is input for some commands, the present
setting value responds.
Response code format
Normal response
Problem response (communication error or
incorrect command)
Commands
NOTE
If an underbar (_) appears in the parameter column, enter a space.
If an asterisk (*) appears, enter a value in the range indicated in
brackets under CONTROL CONTENTS.
RS-232C port specifications
PC Control of the TV
When a programm is set, the TV can be controlled from the
PC using the RS-232C terminal.
The input signal (PC/video) can be selected, the volume can
be adjusted and various other adjustments and settings can
be made, enabling automatic programmed playing.
Attach an RS-232C cable cross-type (commercially available)
to a 9 pin D-sub/MINI-DIN (optional: AN-A1RS) for the
connections.
NOTE
This operation system should be used by a person who is
accustomed to using PCs.
Appendix (continued)
0 0 5 5
1 0 0
3 0
0 0 0 9
0
? ? ? ?
?
O K
Return code (0DH)
E R R
Return code (0DH)
CONTROL ITEM
COMMAND PARAMETER
CONTROL CONTENTS
POWER SETTING P O W R 0 _ _ _ POWER OFF
INPUT SELECTION A
I T G D _ _ _ _ INPUT SWITCHING (TOGGLE)
I T V D _ _ _ _
TV (CHANNEL FIXED)
I A V D 0 _ _ _ TV
I A V D 1 _ _ _ EXT1
I A V D 2 _ _ _ EXT2
I A V D 3 _ _ _ EXT3
I A V D 4 _ _ _ PC
I A V D ? ? ? ? 0 to 4
CHANNEL
D C C H * * _ _
TV DIRECT CHANNEL (0 ~ 99)
D C C H ? ? ? ? 0 to 99
C H U P _ _ _ _ CHANNEL UP
C H D W _ _ _ _ CHANNEL DOWN
INPUT SELECTION B
I N P 1 3 _ _ _ EXT1 (CVBS)
I N P 1 4 _ _ _
EXT1 (RGB)
I N P 1 ? ? ? ?
1 to 2
I N P 2 2 _ _ _ EXT2 (Y/C)
I N P 2 3 _ _ _ EXT2 (CVBS)
I N P 2 ? ? ? ? 0 to 1
I N P 3 0 _ _ _ EXT3
AV MODE
SELECTION
A V M D 0 _ _ _
AV MODE SELECTION (TOGGLE)
A V M D 1 _ _ _ STANDARD
A V M D 2 _ _ _ SOFT
A V M D 3 _ _ _ ECO
A V M D 4 _ _ _ USER
A V M D 5 _ _ _ DYNAMIC
A V M D ? ? ? ? 1 to 5
VOLUME V O L M * * _ _ VOLUME (0 - 50)
V O L M ? ? ? ? 0 to 50
POSITION H P O S * * * _ H-POSITION PC (-30 to +30)
H P O S ? ? ? ? PC (-30 to +30)
V P O S * * * _ V-POSITION PC (-10 to +10)
V P O S ? ? ? ? PC (-10 to +10)
C L C K * * * _ CLOCK (0 to 180)
C L C K ? ? ? ? 0 to 180
P H S E * * * _ PHASE (0 to 40)
P H S E ? ? ? ? 0 to 40
WIDE MODE W I D E 0 _ _ _ WIDE MODE (Toggle)
W I D E 1 _ _ _ 4:3
W I D E 2 _ _ _ 16:9
W I D E ? ? ? ? 1 to 2
MUTE M U T E 0 _ _ _ MUTE (Toggle)
M U T E 1 _ _ _ MUTE ON
M U T E 2 _ _ _ MUTE OFF
M U T E ? ? ? ? 1 to 2
SOUND WIDE A C D V 0 _ _ _ SOUND WIDE (Toggle)
A C D V 1 _ _ _ SOUND WIDE ON
A C D V 2 _ _ _
SOUND WIDE OFF
A C D V ? ? ? ?
1 to 2
AUDIO CHANGE
A C H A _ _ _ _
SOUND SELECT (ST/Bilingual/mono)
SLEEP TIMER O F T M 0 _ _ _ OFF
O F T M 1 _ _ _
30 min
O F T M 2 _ _ _
60 min
O F T M 3 _ _ _ 90 min
O F T M 4 _ _ _ 120 min
O F T M ? ? ? ? 0 to 120
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp lc 20s5e bk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp lc 20s5e bk in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info