Manual Sharp LC-20S4U-S Operation Manual (page 19 of 43) (English)

13289

Zoom out

Zoom in

1/43

Basic Operation (Continued)

Changing Channels

You can select channels using Channel Select or

CH ( )/( ).

• This LCD TV set allows you to select up to 125 channels

(1 to 125). To select a channel, enter a 2- or 3-digit number.

■

Using Channel Select

When selecting the channel using Channel Select, complete

input of the channel number by holding down the button for

the last digit for a moment.

To select a 1- or 2-digit channel number (e.g., Channel 5):

Complete the following procedure within 4 seconds.

Press the

button. Press the button.

0–

• When selecting a 1-digit channel number, do not fail to press the

button first.

To select a 3-digit channel number (e.g., Channel 115):

Complete the following procedure within 4 seconds.

Press the

button. Press the button.

1––

11–

Press the button.

115

• The 3-digit channel number can be selected only when the

receiving mode is set to CABLE in CH-SETTING. (For details on

setting the receiving mode, see page 24.)

Changing channels with CH ( )/( ) on the remote control

Air:

Press CH ( ) and the channels change in the order shown below:

2 → 3 → . . . → 68 → 69 → 2 → 3 → . . .

Press CH ( ) and the channels change in the order shown below:

3 → 2 → 69 → 68 → . . . → 3 → 2 → . . .

Cable: Press CH ( ) and the channels change in the order shown below:

1 → 2 → 3 → . . . → 125 →1 → 2 → 3 → . . .

Press CH

( ) and the channels change in the order shown below:

3 → 2 → 1 → 125 → . . . → 3 → 2 → 1 → . . .

■ Using FLASHBACK

● Press FLASHBACK to switch the currently tuned channel

to the previously tuned channel.

● Press FLASHBACK again to switch back to the currently

tuned channel.

Sound Volume

■ To adjust the volume

● Press VOL (+) to increase the sound volume.

The bar indicator shifts right.

VOLUME

● Press VOL (–) to decrease the sound volume.

The bar indicator shifts left.

VOLUME

■ To mute the sound

● Press MUTE to temporarily turn off the sound.

The MUTE mark

is displayed for 4 seconds.

● Press MUTE or VOL (+)/(–) to turn the sound back to the

previous level.

The mute function is automatically turned off when any of

the following buttons are pressed: POWER, MUTE,

VOL (+)/(–) or MTS.

VOLUME

• When VOL (+)/(–) is pressed in the Mute mode, the sound turns

on and the volume indicator is displayed.

• The Mute function is canceled when POWER is pressed.

■ To select MTS (Multichannel TV Sound)

Press MTS to display the MTS screen.

Press MTS to select the MTS settings.

STEREO: stereo audio

SAP: secondary audio program

MONO: monophonic audio

STEREO

ON A I R

SAP

ONO

• “ON AIR” appears when a STEREO or SAP broadcast is being

aired.

1 2

LC-20S4U_E_P14-20.p65 04.12.8, 6:26 PM18

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-20S4U-S Operation Manual in the language / languages: English as an attachment in your email.

The manual is 3,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp LC-20S4U-S Operation Manual Manual

Product: