13285
28
Zoom out
Zoom in
Previous page
1/52
Next page
27
Connecting a PC (Personal computer)
Viewing an image from a PC
Use the INPUT5 (PC) terminals to connect a PC.
NOTE
The PC input terminals are DDC1/2B-compatible.
Refer to page 28 for a list of PC signals compatible with the System.
Make sure to select the same signal values for the output signal of a PC and the input signal of the TV/DVD
set before connecting with the PC. (See page 28.)
Depending on the PC being used, images may not be shown without converting the output signals into
external output. Please refer to your PC’s manuals regarding converting to external output.
Signal names for 15-pin mini D-sub connecter
15
14
13
12
9
11
10
8
7
6
5
4
3
2
1
Pin No. Signal name Pin No. Signal name Pin No. Signal name
1 R 6 GND (Ground) 11 Not connected
2 G 7 GND (Ground) 12 SDA
3 B 8 GND (Ground) 13 HD
4 Not connected 9
+
5V 14 VD
5 CSYNC 0 GND (Ground) 15 SCL
Connecting the RGB cable
• Connect the RGB cable making sure
that it fits correctly into the terminal.
Then, firmly secure the connectors
by tightening the screws on both
sides of the plug.
PC
RGB cable
(commercially available)
To AUDIO
input terminals
To Audio output
terminals
To ANALOG
RGB terminal
To ANALOG RGB
output terminal
Audio cable
(commercially available)
NOTE
Pin No. 5 is not used for inputting the signal.
Pin No. 9 is not connected with the supplied RGB cable.
Displaying an image from a PC
To view an image from a PC, perform the
following procedure.
1 Select the INPUT5 (PC) mode using INPUT
on the remote control or the TV/DVD. (See
page 19.)
2 Select the PC input signal. (See page 28.)
3 Adjust the “PICTURE.” items if the PC
image does not come in clearly. (See page 28.)
SOURCE SELECTION
0. TV
1. INPUT1
2. INPUT2
3. INPUT3
4. INPUT4
5. INPUT5
[0-5]:SELECT
5X20431A_P23_28.indd 275X20431A_P23_28.indd 27 5/19/2006 10:57:38 PM5/19/2006 10:57:38 PM
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-20DV20U Operation Manual at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-20DV20U Operation Manual in the language / languages: English as an attachment in your email.

The manual is 9,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info