Manual Sharp LC-20B8U-S Operation Manual (page 18 of 45) (English, French, Portuguese, Spanish)

13281

Zoom out

Zoom in

1/45

Basic Operation (Continued)

Changing Channels

You can select channels using Channel Select or

CH ( )/( ).

• This LCD TV set allows you to select up to 125 channels

(1 to 125). To select a channel, enter a 2- or 3-digit number.

■

Using Channel Select

When selecting the channel using Channel Select, complete

input of the channel number by holding down the button for

the last digit for a moment.

To select a 1- or 2-digit channel number (e.g., Channel 5):

Complete the following procedure within 4 seconds.

Press the

button. Press the button.

0–

• When selecting a 1-digit channel number, do not fail to press the

button first.

To select a 3-digit channel number (e.g., Channel 115):

Complete the following procedure within 4 seconds.

Press the

button. Press the button.

1––

11–

Press the button.

115

• The 3-digit channel number can be selected only when the

receiving mode is set to “CABLE” in “CH-SETTING”. (For details

on setting the receiving mode, see page 23.)

Changing channels with CH ( )/( ) on the remote control

Air:

Press CH ( ) and the channels change in the order shown below:

2 → 3 → . . . → 68 → 69 → 2 → 3 → . . .

Press CH ( ) and the channels change in the order shown below:

3 → 2 → 69 → 68 → . . . → 3 → 2 → . . .

Cable: Press CH ( ) and the channels change in the order shown below:

1 → 2 → 3 → . . . → 125 →1 → 2 → 3 → . . .

Press CH ( ) and the channels change in the order shown below:

3 → 2 → 1 → 125 → . . . → 3 → 2 → 1 → . . .

■ Using FLASHBACK

● Press FLASHBACK to switch the currently tuned channel

to the previously tuned channel.

● Press FLASHBACK again to switch back to the currently

tuned channel.

1 2

Selecting Menu Items

The menus can be used to adjust the various settings of the

LCD TV set. Select the desired menu item by following the

steps below. See the next page for each Menu screen.

• The items displayed differ depending on the setting conditions.

• The item selected is displayed in yellow.

• Settings most recently adjusted will be saved in memory.

■ Using the remote control

Press MENU on the remote control to display the Menu

screen.

Press \/| to select the desired menu item.

• The cursor moves left or right.

• The cursor indicates the selected menu item.

Press '/" to select the desired item, and press \/|

to adjust the selected item.

• For “AV MODE”, “OPC”, “ADVANCED” and “RESET”,

press ENTER to display the setting screen.

SELECT

ENTER

RETURN

BACK

EXIT

MENU[

PICTURE

]

PICTURE

AUDIO SETUP OPTION

AV MODE [DYNAMIC]

OPC [OFF]

BACKLIGHT [

BRIGHT

]

CONTRAST [ 4 ]

BRIGHTNESS[ ]– +

COLOR [+ 5]– +

TINT [

]

SHARPNESS [ ]– +

ADVANCED

RESET

Press MENU RETURN to return to the previous screen,

or press MENU to exit.

■ Using the control panel of the main unit

You can also operate the menu with the control panel of the

main unit.

Button operations on the control panel correspond to the

ones on the remote control as shown below.

Control panel of the main unit

VOL (–)/(+): Cursor \/| on the remote control

CH (

)/( ): Cursor "/' on the remote control

MENU: MENU on the remote control

INPUT: ENTER on the remote control

LC-20B8U_E_P13-18.p65 05.2.3, 2:05 PM17

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-20B8U-S Operation Manual in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp LC-20B8U-S Operation Manual Manual

Product: