13253

Sharp LC-10A3UB-US Operation Manual Manual

16
Zoom out
Zoom in
Previous page
1/37
Next page
LCD COLOR TELEVISION
OPERATION MANUAL
LC-10A3U
ENGLISH
Printed on post-consumer recycled paper.
Imprimé sur du papier recyclé.
FRANÇAIS
TÉLÉVISION COULEUR À
ÉCRAN À CRISTAUX
LIQUIDES (LCD)
MODE D’EMPLOI
IMPRESO EN JAPÓN
TINS-7386CEN1
IMPRESSO NO JAPÃO
LC-10A3U
LCD COLOR TELEVISION
OPERATION MANUAL
ENGLISH
ENGLISH
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrow-
head symbol, within an equilat-
eral triangle, is intended to alert
the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within a
triangle is intended to alert the
user to the presence of impor-
tant operating and maintenance
(servicing) instructions in the
literature accompanying the
product.
IMPORTANT:
To aid reporting in case of loss or theft, please
record the TV’s model and serial numbers in the
space provided. The numbers are located at the
rear of the TV.
U.S.A. ONLY
Model No.:
Serial No.:
2
3
IMPORTANT INFORMATION
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment
not expressly approved by the manufacturer could void the user’s authority to operate this equipment.
U.S.A. ONLY
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40
of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”
4
CONTENTS
Page
DEAR SHARP CUSTOMER .............................................................................................................5
IMPORTANT SAFETY PRECAUTIONS ....................................................................................... 5,6
SUPPLIED ACCESSORIES ............................................................................................................. 7
PREPARATION............................................................................................................................8-10
Preparing and Using the Remote Control ............................................................................... 8
Batteries for Remote Control ....................................................................................................8
Power Connection ...................................................................................................................... 9
Antenna Connection ..............................................................................................................9,10
FRONT AND REAR CONTROL OPTIONS ................................................................................... 11
REMOTE CONTROL ...................................................................................................................... 13
BASIC OPERATION ................................................................................................................. 13-16
Turning on POWER................................................................................................................... 14
Switching TV/VIDEO AV1/AV2/TV Mode ................................................................................ 14
Sound Volume ........................................................................................................................... 15
ON/OFF Standby ....................................................................................................................... 15
Changing the Channels............................................................................................................ 16
SELECTING THE MENU ITEMS .................................................................................................... 17
Selecting a Menu Item .............................................................................................................. 17
EZ SETUP DURING FIRST POWER ON....................................................................................... 18
ADJUSTMENT .......................................................................................................................... 19-26
Adjusting the LANGUAGE Settings........................................................................................ 19
Adjusting the SLEEP TIMER Settings .................................................................................... 19
Adjusting the VIDEO ADJUST Settings ............................................................................ 20,21
Adjusting the PRESET Settings .............................................................................................. 22
SETUP .................................................................................................................................. 23-25
Adjusting the BLUE SCREEN Settings .................................................................................. 26
LISTENING WITH A HEADPHONE ............................................................................................... 27
EXAMPLE OF APPLICATION ....................................................................................................... 27
CONNECTING WITH EXTERNAL DEVICES .......................................................................... 28-30
TROUBLESHOOTING ...............................................................................................................31,32
SPECIFICATIONS........................................................................................................................... 33
5
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp LCD Color TV product. To ensure safety and
many years of trouble-free operation of your product, please read the Safety Precau-
tions carefully before using this product.
IMPORTANT SAFETY PRECAUTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property
damage if improperly handled. This product has been engineered and manufactured with the highest
priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent
potential danger, please observe the following instructions when installing, operating and cleaning the
product. To ensure your safety and prolong the service life of your LCD color TV product, please read the
following precautions carefully before using the product.
1. Read instructions—All operating instructions must be read and understood before the product is
operated.
2. Keep this manual in a safe place—These safety and operating instructions must be kept in a safe
place for future reference.
3. Observe warnings—All warnings on the product and in the instructions must be observed closely.
4. Follow instructions—All operating instructions must be followed.
5. Cleaning—Unplug the power cord from the AC outlet before cleaning the product. Use a damp
cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
6. Attachments—Do not use attachments not recommended by the manufacturer. Use of inadequate
attachments can result in accidents.
7. Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen
sink and laundry tub, swimming pool and in a wet basement.
8. Stand—Do not place the product on an unstable cart, stand, tripod or table. Placing the product
on an unstable base can cause the product to fall, resulting in serious personal injuries as well as
damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the
manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the
manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.
9. When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops,
excessive force and uneven floor surface can cause the product to fall from the cart.
10. Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not
cover or block these vents and openings since insufficient ventilation can cause overheating and/
or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar
surface, since they can block ventilation openings. This product is not designed for built-in
installation; do not place the product in an enclosed place such as a bookcase or rack, unless
proper ventilation is provided or the manufacturer’s instructions are followed.
11. Power source—This product must operate on a power source specified on the specification label.
If you are not sure of the type of power supply used in your home, consult your dealer or local
power company. For units designed to operate on batteries or another power source, refer to the
operating instructions.
12. Power cord protection—The power cords must be routed properly to prevent people from stepping
on them or objects from resting on them. Check the cords at the plugs and product.
13. If the AC adapter is misplaced or needs to be replaced, obtain the same type of adapter from a
SHARP service center or your dealer.
14. The LCD panel used in this product is made of glass. Therefore, it can break when the product is
dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the
LCD panel breaks.
15. Overloading—Do not overload AC outlets or extension cords.
Overloading can cause fire or electric shock.
16. Entering of objects and liquids—Never insert an object into the product through vents or openings.
High voltage flows in the product, and inserting an object can cause electric shock and/or short
internal parts. For the same reason, do not spill water or liquid on the product.
6
17. Servicing—Do not attempt to service the product yourself. Removing covers can expose you to
high voltage and other dangerous conditions. Request a qualified service person to perform
servicing.
18. Repair—If any of the following conditions occurs, unplug the power cord from the AC outlet, and
request a qualified service person to perform repairs.
a.When the power cord or plug is damaged.
b.When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d.When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper
adjustment of controls not described in the instructions can cause damage, which often requires
extensive adjustment work by a qualified technician.
e.When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the product
indicates that the product needs servicing.
19. Replacement parts—In case the product needs replacement parts, make sure that the service
person uses replacement parts specified by the manufacturer, or those with the same characteris-
tics and performance as the original parts. Use of unauthorized parts can result in fire, electric
shock and/or other danger.
20. Safety checks—Upon completion of service or repair work, request the service technician to
perform safety checks to ensure that the product is in proper operating condition.
21. Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the
product according to the method recommended by the manufacturer.
22. Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and
other heat-generating products (including amplifiers).
23. Polarization—This AC adapter may be equipped with a polarized alternating current line plug (a
plug having one blade wider than the other). This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
The LCD panel is a very high technology product with 921,600 thin film transistors, giving you fine
picture details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or
red.
Please note that this does not affect the performance of your product.
IMPORTANT SAFETY PRECAUTIONS (Continued)
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury.
Disposal of these materials may be regulated due to environmental considerations. For disposal or
recycling information, please contact your local authorities or the Electronics Industries Alliance:
www.eia.org
7
Make sure the following accessories are provided with the product.
SUPPLIED ACCESSORIES
Operation Manual (×1) Wireless Remote Control (×1)
Wall Mount Bracket (×1)
AC Cord
Antenna Cable
Size AAA Dry Battery (×2)AC Adapter (×1)
Fixed Screw
for Set Stand (×1)
TINS-7386CEN1
RRMCG1559CESA
LANGU9053CE01
QCNW-5730CEZZ
QACCD3099CEPZ
UADP-0227CEPZ
Wall Mount Bracket Screws (×4)
LCD COLOR TELEVISION
OPERATION MANUAL
LC-10A3U
ENGLISH
IMPRIM AU JAPON
TINS-2068CEZZ
Printed on post-consumer recycled paper.
Imprimé sur du papier recyclé.
FRANÇAIS
TÉLÉVISION COULEUR À
ÉCRAN À CRISTAUX
LIQUIDES (LCD)
MODE D’EMPLOI
PRINTED IN JAPAN
PRINTED IN JAPAN
IMPRIMÉ AU JAPON
TINS-7386CEN1
8
PREPARATION
Batteries for Remote Control
If the remote control fails to operate LCD color TV functions, replace the batteries in the remote
control.
1 Open the battery
cover.
2 Insert batteries (two
size-AAA batteries,
supplied with product).
3 Close the battery
cover.
■ Slide the cover while
pressing down.
■ Place batteries with their
terminals corresponding to
the (+) and (–) indications
in the battery compartment.
–
Caution!
Cautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the
instructions below.
• Place batteries with their terminals corresponding to the (+) and (–) indications.
• Different types of batteries have different characteristics. Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new
batteries and/or cause old batteries to leak chemicals.
• Remove batteries as soon as they are non-operable.
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a
cloth.
• The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
• If the remote control is not used for an extended period of time, remove batteries from the remote
control.
Preparing and Using the Remote Control
■ Use the remote control by pointing it towards the remote sensor window.
Objects between the remote control and sensor window may prevent proper
operation.
Cautions regarding use of remote control
■ Do not expose the remote control to shock.
In addition, do not expose the remote control to liquids, and do not place in
an area with high humidity.
■ Do not install or place the remote control under direct sunlight.
The heat may cause deformation of the unit.
■ The remote control may not work properly if the remote sensor window of the
main unit is under direct sunlight or strong lighting. In such case, change the
angle of the lighting or LCD TV set, or operate the remote control closer to
the remote sensor window.
9
Power Connection
Plug into AC outlet.
Household power outlet
AC cord
AC adapter
Connect to the DC input
terminal of the product.
Notes:
■ Use a commercially available AC plug adapter, if necessary, depending on the design of the wall socket.
■ Always turn the main power switch of the LCD TV set to OFF when connecting the AC adapter.
■ Always unplug the AC adapter from the product and power outlet when not using for long periods of time.
To DC input terminal
(DC 12V)
PREPARATION (Continued)
Antenna Connection
CABLE TV (CATV) CONNECTION
Cable TV converter/
descrambler
(not supplied)
Two-set
signal
splitter
(not
supplied)
Cable TV Line
RF switch (not supplied)
OUT
IN
• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75
ohm coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium
pay channels are scrambled, a cable TV converter/descrambler is generally provided to the
subscriber by the cable TV company. This converter/descrambler is necessary for normal
viewing of the scrambled channels. (Place your TV on channel 3 or 4, typically one of these
channels is used. If this is unknown, consult your cable TV company.) For more specific instruc-
tions on installing cable TV, consult your cable TV company. One possible method of utilizing the
converter/descrambler provided by your cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s
channel keys.
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/
descrambler using the converter’s channel keys.
■ Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be
required.
Note:
15
Sound Volume
ON/OFF Standby
POWER
TV/VIDEO
CH
CH
8
9
0
DISPLAY
LCDTV
123
456
7
MENU
FLASHBACK
MUTE
MUTE
To mute sound
POWER
TV/VIDEO
CH
CH
8
9
0
DISPLAY
LCDTV
123
456
7
MENU
FLASHBACK
MUTE
POWER
BASIC OPERATION (Continued)
1 Press the VOL (+) to increase sound
volume. The segment of indicator
increases.
2 Press the VOL (–) to decrease sound
volume. The segment of indicator
decreases.
1 Press the MUTE to temporarily turn
off the sound.
Screen displays MUTE MARK.
2 Press the MUTE or VOL (+)/(–) to
turn the sound back to the previous
level.
The following buttons can also be
used to cancel MUTE: CH, TV/
VIDEO, FLASHBACK, POWER ON/
OFF, BRIGHT.
To turn off the LCD TV
Press the POWER on the remote
control.
The Power indicator will turn red.
To turn the LCD TV back on
Press the POWER again.
The Power indicator will turn green.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-10A3UB-US Operation Manual at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-10A3UB-US Operation Manual in the language / languages: English, French as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info