559933

Sharp LC -42RD2SA Manual

27
Zoom out
Zoom in
Previous page
1/40
Next page
25
Label
Change individual service names.
1 Press a/b to select the desired service.
2 Press on the remote control. A character set
screen displays.
3 Enter new name for the service. See page 23 for
operations using the character set screen.
Erase
Erase the selected service(s) from the memory.
1 Press a/b to select the desired service.
2 Press on the remote control. An icon displays
indicating the service to be erased.
• Pressing will turn the erase icon on and off.
• Do not press END to exit the screen here if you wish
to register the change.
3 Press OK.
• A confirmation message displays.
4 Press c/d to select “Yes”, and then press OK.
View
Tune to the service shown in the picture window.
1 Press a/b to select the desired service.
2 Press on the remote control.
• The image shown in the picture window changes.
3 Press END to exit the Programme Setup screen
to view the image in full screen.
DTV menu operations
Installation
This section describes how to reconfigure the DTV
settings after conducting Initial auto installation
(DTV) on page 8.
Carrier Scan
Manually add a new carrier by entering the desired
carrier number or frequency band.
1 Press c/d to select “Installation”.
2 Press a/b to select “Carrier Scan”, and then
press OK.
If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
Auto Installation
The TV automatically detects and stores all available
services in your area. See Initial auto installation
(DTV) on page 8 for details.
NOTE
• If the TV detects a new carrier/service that has become
available after performing “Auto Installation”, the message
“Do you want to save?” displays.
Press c/d to select “Yes” or “No”, and then press OK.
Carrier Scan
Select
35
554000
Channel
Frequency (kHz)
0...9 OK ENDDTV MENU
3 Press a/b to select “Channel”, then c/d to enter
the carrier number, and then press OK.
• The frequency of the selected carrier in the below
cell changes correspondingly.
4 After the scan is complete, the screen shows all
available services for the selected range.
5 A confirmation message displays. Press c/d to
select “Yes”, and then press OK to save the
change.
NOTE
• You can directly enter the frequency instead of step 3. In
this case, select “Frequency (kHz)”, enter the number
using
- numeric buttons, and then press OK. Use
c/d to move between the digits.
• After performing “Carrier Scan”, the order stored by using
the “Move” function will revert to the default order.
• See page 17 for setting the PIN.
Select
Use this function to jump to the specific service in one
step. This is useful when there are many services
displayed on screen to scroll through.
1 Press on the remote control. Now you can
change the service number on the left side of the
screen.
2 Enter the number using - numeric buttons,
and then press OK. The highlight moves to the
selected service.
LC-42RD2EA_GB_d 07.6.20, 5:39 AM25
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC -42RD2SA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC -42RD2SA in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC -42RD2SA

Sharp LC -42RD2SA User Manual - German - 40 pages

Sharp LC -42RD2SA User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info