559933
21
Zoom out
Zoom in
Previous page
1/40
Next page
19
Menu operations
HDMI Setup
HDMI (High-Definition Multimedia Interface) terminal
selection.
1 To watch an HDMI equipment image, select
EXT5 or EXT6 (the terminal which you are
using) from INPUT SOURCE menu using b
on the remote control unit or TV.
2 Press MENU and the MENU screen displays.
3 Press c/d to select Option.
4 Press a/b to select HDMI Setup, and then
press OK.
• “HDMI Setup” is displayed only when “EXT5” or
“EXT6” is selected from the INPUT SOURCE menu.
DNR (Digital Noise Reduction)
Menu Operation: A (page 12)
Produce a clearer image. (Off, High, Low)
Colour System
Menu Operation: A (page 12)
You can change the colour system to one that is
compatible with the image on the screen. (AUTO, PAL,
SECAM, NTSC3.58, NTSC4.43, PAL-60)
NOTE
Factory preset value is “AUTO”.
If “AUTO” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, SECAM).
“NTSC3.58”, “NTSC4.43” and “PAL-60” cannot be
selected in TV tuner mode.
Input Select
Menu Operation: A (page 12)
For setting the signal type of external equipment.
NOTE
If no (colour) image displays, try to change the other
signal type.
Check the operation manual of the external equipment
for the signal type.
TV, EXT5 and EXT6 are not displayed in Input Select.
If both CVBS and RGB signals are input to EXT 1 or EXT 2
using a SCART cable, the TV may output an RGB signal
even though you have designated CVBS for the respective
terminal. This happens due to the setting of your external
equipment.
• EXT 3 has “Rear” and “Side” terminals. Confirm which
terminal you have connected, and select the appropriate
terminal under “Input Select”. When using S-VIDEO, select
“Rear” for EXT3.
AV only
TV/AV only
TV/DTV/AV only
MENU
[
Option
...
HDMI Setup
]
Option
Audio Only
DNR
HDMI Setup
[Off]
5 Press a/b to select the desired item, and then
press OK.
6 Press a/b/c/d to select the desired setting, and
then press OK.
Selectable items
RGB/YCbCr 4:4:4/
YCbCr 4:2:2
ITU601/ITU709
Normal/
Enhanced
Disable/Enable
Digital/Analogue
HDMI Setup
items
Signal
Type*
Colour
Matrix*
Dynamic
Range*
Auto View
Audio
Select**
Description
Select the video signal
type from the HDMI
terminal.
Select the internal colour
space conversion method
when an RGB signal is
input.
Select the signal amplitude
range. Usually, select
“Normal”.
Set whether or not to use
WIDE MODE based on
signal recognition,
including an HDMI signal.
Select “Digital” for audio
signal via the HDMI
terminal. Select “Analogue”
for audio signal via the
AUDIO jack.
NOTE
• Refer to your external equipment operation manual for
the signal type.
Items marked * may be greyed out (with 4) depending
on the type of signal input from the external equipment.
Item marked ** is only available when EXT5 is selected.
Input source Signal type
EXT 1 Y/C, CVBS, RGB
EXT 2
Y/C, CVBS, RGB
EXT 4 PC (RGB), COMPONENT (Y, PB, PR)
EXT 3 CVBS, S-VIDEO
CVBS
Rear
Side
LC-42RD2EA_GB_b 07.6.20, 5:38 AM19
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC -42RD2SA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC -42RD2SA in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC -42RD2SA

Sharp LC -42RD2SA User Manual - German - 40 pages

Sharp LC -42RD2SA User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info