559932
17
Zoom out
Zoom in
Previous page
1/40
Next page
15
Setup menu
Menu operations
MENU
[
Setup
]
Setup Option
Child Lock
Auto Installation
Programme Setup
Position
WSS
4:3 Mode [Panorama]
[On]
[Off (0V)]Supply Voltage
[English]Language
Power Management
Menu Operation: A (page 12)
When set, the TV will automatically enter the standby mode.
Off: No power management
Factory preset value.
Mode1: If there is no signal input for 8 minutes, the TV
enters the standby mode.
Even if you start using the PC and the signal
inputs again, the TV stays in standby mode.
The TV turns on again by pressing a on the
TV or B on the remote control unit. (See page
8.)
Mode2: If there is no signal input for 8 seconds, the
TV enters the standby mode.
When you start using the PC and the signal
inputs again, the TV turns on.
The TV turns on again by pressing
a
on the TV
or
B
on the remote control unit. (See page 8.)
PC only
Auto Installation
You can run Auto Installation again, even after setting
up the preset channels.
1 Press MENU and the MENU screen displays.
2 Press c/d to select Setup.
3 Press a/b to select Auto Installation, and then
press OK.
If you have already set the PIN under Child Lock,
enter it here.
See page 17 for setting PIN.
4 Press c/d to select Ye s , and then press OK.
5 You can set language and country the same as in
the initial auto installation. Follow steps 1 and 2
on page 8.
TV only
Auto Vol.
Menu Operation: A (page 12)
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. The Automatic Volume
Control (Auto Vol.) solves this problem and equalises
the volume levels.
Clear Voice
Menu Operation: A (page 12)
This function emphasises speech voice against the
background noise for more intelligibility. It is not
recommended for music sources.
TV/DTV/AV only
Power Control menu
No Signal Off
Menu Operation: A (page 12)
When set to “Enable” the TV will automatically enter the
standby mode if there is no signal input for 15 minutes.
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
NOTE
• When a TV programme finishes, this function may not
operate.
This function is not available in DTV mode.
MENU
[
Power Control
]
Audio Power Control
No Signal Off
No Operation Off
[Disable]
[Disable]
TV/AV only
No Operation Off
Menu Operation: A (page 12)
When set to “Enable” the TV will automatically enter the
standby mode if no operations are performed for 3 hours.
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
TV/DTV/AV only
Item
Surround
Menu Operation: A (page 12)
Surround function allows you to enjoy realistic “live”
sound.
NOTE
You can also choose surround effects by pressing
SURROUND on the remote control unit.
LC-42RD2EA_GB_b 07.6.20, 5:37 AM15
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC -42RD2EA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC -42RD2EA in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp LC -42RD2EA

Sharp LC -42RD2EA User Manual - German - 40 pages

Sharp LC -42RD2EA User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info