770381
21
Zoom out
Zoom in
Previous page
1/103
Next page
EN -13-
Touching and sets the timer val-
ue for the heater.
Thetimerrunningfortherstsetheater
timer is indicated by the lit cooking zone
indicator.
Touching once again assigns other
timers to other activated heaters.
10 sec after the last operation, the timer
displaychangestothetimerthatwilln-
ish next.
The assignment of that timer is always
displayed by a ashing cooking zone
indicator. The cooking zone indicator
shows how many timers are on at any
one time.
By toggling , you can display the tim-
er values for the heater timer and the
minute minder. The assignment is al-
waysindicatedbytheashingcooking
zone indicator. If no cooking zone indi-
catorashes,theminutemindertimeis
shown in the 2-digit timer display.
All heater timers can be erased by
switching off the appliance into the S
mode using . A minute minder will not
be erased. It will continue with the op-
eration until time is up.
To erase a timer in operation mode, you
rsthavetoselectthetimerbytoggling
the Active/Deactivated timer button until
it is displayed. The value can then be
erased 2 different ways:
· Decrement by touching until ´00`
appears on the Timer Display.
· Touch and simultaneously for
0.5 sec until ´00` is shows on the timer
display.
After reaching the ´00` on a heater tim-
er, the assigned heater level will be set
to ´0`.
A buzzer will signal that the heater timer
orminuteminderhasnishedcounting
down to 0. Erase by touching any but-
ton for acknowledgement.
Wait until ‘F’ disappears for all zones,
then turn the hob on by touching and
continue to use.
Key Lock
Key lock functionality is for blocking and
set the appliance into a save modus
during operation. Touch modications
as for example rise heat settings and
others should not be possible. It is only
possible to switch the appliance off.
The lock function is active, if the Key
Lock button is pressed at least 2
sec. This operation is acknowledged by
a buzzer. After successful operation of
more than 2 sec, the key lock indicator
ashesandtheheaterislocked.
The heater can only be locked in oper-
ating mode (B mode).
If the heater is locked, only can be
operated; all other buttons are blocked.
If any other button is operated in the
blocked mode, the buzzer signal sounds
andthekeylockindicatorashesasin-
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp KH-6V08FT00 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp KH-6V08FT00 in the language / languages: English, Dutch as an attachment in your email.

The manual is 6.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp KH-6V08FT00

Sharp KH-6V08FT00 User Manual - German, French, Italian - 115 pages

Sharp KH-6V08FT00 User Manual - Portuguese - 100 pages

Sharp KH-6V08FT00 User Manual - Swedish, Spanish - 100 pages

Sharp KH-6V08FT00 User Manual - Finnish - 115 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info