770381
18
Zoom out
Zoom in
Previous page
1/103
Next page
EN -10-
Turn the Appliance off and on
If the appliance is in standby mode,
it is put in operating mode by holding
the On/Off button down for at least
1 second. A buzzer signal acoustically
indicates the successful operation. A
´0` appears and all decimal points on
theheaterash(1secon,1secoff)on
all the heaters.
If operation does not start within 10
sec, the display for all heaters will turn
off.
If the displays are turned off, the heater
will be go into standby mode.
If is pressed more than 2 sec (in op-
erating mode), the appliance will switch
off and is go back to the S mode. The
appliance can be turned off by pressing
at any time, even if other buttons
are pressed simultaneously.
If there is a residual heat from a heater,
this will be indicated on the heater
display.
Selecting the Heater
If a single heater is chosen by press-
ing the respective activate/deactivate
heater button, the decimal point on the
relatedheaterdisplaywillash.Forthe
selected heater, you can set the heat
level between 1-9 by touching the heat
setting buttons or .
The buttons must be pressed within 3
sec, otherwise the heater selection will
be erased and the heat setting dot will
disappear (decimal point). If there is
no further operation within 10 sec, the
heater goes back into the S mode.
The heat setting can always be
changed by pressing or between
level 1-9.
Each button operation or each dis-
playchangeisconrmedbyabuzzer
signal.
Setting the Cooking Level With
and Without Heat Boost
All heaters are equipped with heat
boost functionality.
If the heat boost is active, then the
heater will be operated with maximum
power for the period of the heat boost
time, which is dependent on the se-
lected heat setting. This is indicated by
aashing´A`,alternatingwiththeheat
setting value (e.g. 0.5 sec ´A` and 0.5
sec ´9`) on the heater display. Once
the heat boost time has ended, only
the heat setting will be indicated.
If the heat boost is used for a heater,
heater level 9 must be operated by
pressing starting from level 0. After
setting the heat to level 9 , ´A` will be
indicated alternating. This means that
level 9 and heat boost is now active.
The heat boost can be turned off by
pressing until heat setting ´0` ap-
pears.
If the heat boost is used, it can always
be activated by reactuating it if the
heat setting is set to level 9. ´A/9` will
ashontheheatdisplay.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp KH-6V08FT00 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp KH-6V08FT00 in the language / languages: English, Dutch as an attachment in your email.

The manual is 6.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp KH-6V08FT00

Sharp KH-6V08FT00 User Manual - German, French, Italian - 115 pages

Sharp KH-6V08FT00 User Manual - Portuguese - 100 pages

Sharp KH-6V08FT00 User Manual - Swedish, Spanish - 100 pages

Sharp KH-6V08FT00 User Manual - Finnish - 115 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info